Shuo Tang
Research Subjects
Shuo Tang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Bing Lei
Marine Corrosion and Protection Team, School of Chemical Engineering and Technology (Zhuhai)
1 shared publicationGuozhe Meng
Marine Corrosion and Protection Team, School of Chemical Engineering and Technology (Zhuhai)
1 shared publication- Honglei Guo
School of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China
1 shared publication Junlin Chen
Marine Corrosion and Protection Team, School of Chemical Engineering and Technology (Zhuhai)
1 shared publicationPeng Xu
Marine Corrosion and Protection Team, School of Chemical Engineering and Technology (Zhuhai)
1 shared publicationPing Zhang
Department of Civil and Environmental Engineering, Faculty of Science and Technology
1 shared publication
Latest Publications
- 28 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (14) , 21745-21759
Maze Effect or Antimaze Effect: The Double Effect of Modified 2D Fillers Ti3C2Tx on the Properties of Waterborne Polyurethane Coatings
With a high aspect ratio and a good ion barrier property, two-dimensional fillers can prevent the invasion of corrosive media by a "maze effect" when showing good interface compatibility with polymer. However, this blocking effect also affects the release of volatile substances during the coating curing process, leading to an ""antimaze effect" and an increase in internal coating defects. In this work, 2-D filler Ti3C2Tx was noncovalently modified with corrosion inhibitor 8-HQ and dopamine in one step to obtain a filler owing good interfacial compatibility with polyurethane. Its "antimaze effect" in waterborne polyurethane coating was studied. The results of electrochemical impedance spectroscopy and the water absorption test showed that the coating exhibited the best performance when the dosage of modified Ti3C2Tx was 0.25 wt %, by which the "maze effect" and "antimaze effect" reach balance. The low-frequency impedance modulus was 14 times higher than that of the control sample, and the saturated water absorption was reduced by 56.15%. The enhancement mechanism of the coating's anticorrosion property by modified Ti3C2Tx was analyzed. Results showed that the addition of modified fillers not only improves the "maze effect" but also reduces the internal defects of the coating. The corrosion inhibitor used for modification enhanced the adhesion. It also played a corrosion inhibition role in subsequent long-term service or when the coating was damaged. This study provides a new reference for the application of 2D fillers in organic coatings.
- 28 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (14) , 21745-21759
Maze Effect or Antimaze Effect: The Double Effect of Modified 2D Fillers Ti3C2Tx on the Properties of Waterborne Polyurethane Coatings
With a high aspect ratio and a good ion barrier property, two-dimensional fillers can prevent the invasion of corrosive media by a "maze effect" when showing good interface compatibility with polymer. However, this blocking effect also affects the release of volatile substances during the coating curing process, leading to an ""antimaze effect" and an increase in internal coating defects. In this work, 2-D filler Ti3C2Tx was noncovalently modified with corrosion inhibitor 8-HQ and dopamine in one step to obtain a filler owing good interfacial compatibility with polyurethane. Its "antimaze effect" in waterborne polyurethane coating was studied. The results of electrochemical impedance spectroscopy and the water absorption test showed that the coating exhibited the best performance when the dosage of modified Ti3C2Tx was 0.25 wt %, by which the "maze effect" and "antimaze effect" reach balance. The low-frequency impedance modulus was 14 times higher than that of the control sample, and the saturated water absorption was reduced by 56.15%. The enhancement mechanism of the coating's anticorrosion property by modified Ti3C2Tx was analyzed. Results showed that the addition of modified fillers not only improves the "maze effect" but also reduces the internal defects of the coating. The corrosion inhibitor used for modification enhanced the adhesion. It also played a corrosion inhibition role in subsequent long-term service or when the coating was damaged. This study provides a new reference for the application of 2D fillers in organic coatings.