Warren Watson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Warren Watson has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Julia Gottschall
Fraunhofer Institute for Wind Energy Systems IWES, Bremerhaven, Germany
4 shared publications Gerrit Wolken-Möhlmann
Fraunhofer Institute for Wind Energy Systems (IWES), Am Seedeich 45, 27572 Bremerhaven, Germany
2 shared publicationsHarald Czekala
1 shared publicationJulia Gottschall
Fraunhofer Institute for Wind Energy Systems IWES
1 shared publication- Martin Georg Jonietz Alvarez
Fraunhofer Institute for Wind Energy Systems IWES, Am Seedeich 45, 27572 Bremerhaven, Germany
1 shared publication
Latest Publications
- Open Access
- 22 June 2026
- Published by Copernicus GmbH
Effects of Platform Motion on Microwave Radiometer Measurements
Offshore wind energy is a rapidly expanding sector and a key element of the transition toward sustainable energy systems. Accurate characterization of site conditions, such as wind speed, atmospheric stability, and metocean conditions, is essential for the planning, design, and operation of offshore wind farms.While traditional meteorological masts can provide detailed measurements of these parameters, their installation and maintenance are costly. Consequently, floating lidar systems (FLS) have become the preferred alternative for offshore wind resource assessment, providing wind measurements together with selected meteorological and oceanographic parameters.Mounting a microwave radiometer (MWR) on a floating platform would complement these measurements by providing continuous vertical profiles of temperature and humidity, enabling in-situ characterization of atmospheric stability. Atmospheric stability strongly influences boundary-layer structure, wind shear, and wake development and is therefore important for offshore wind resource assessment and modeling.This study investigates the feasibility of such a concept by assessing the influence of platform motion on MWR measurements, which are used to derive stability parameter, such as the bulk Richardson number. Measurements from a motion-table-mounted, moving, uncompensated MWR are compared with those from a stationary system of the same type in an onshore experiment.The results quantify the impact of platform motion on retrieved profiles and evaluate whether motion compensation is required for reliable deployment of MWR systems on floating platforms. The analysis includes controlled sinusoidal motion patterns (roll, pitch, and combined pitch \& roll) at three intensity levels, as well as realistic motion derived from floating platform measurements. The findings of this work contribute to the assessment of the feasibility of integrating MWR systems into floating platforms for offshore wind applications.
- 22 June 2026
- Published by Copernicus GmbH
Open AccessEffects of Platform Motion on Microwave Radiometer Measurements
Offshore wind energy is a rapidly expanding sector and a key element of the transition toward sustainable energy systems. Accurate characterization of site conditions, such as wind speed, atmospheric stability, and metocean conditions, is essential for the planning, design, and operation of offshore wind farms.While traditional meteorological masts can provide detailed measurements of these parameters, their installation and maintenance are costly. Consequently, floating lidar systems (FLS) have become the preferred alternative for offshore wind resource assessment, providing wind measurements together with selected meteorological and oceanographic parameters.Mounting a microwave radiometer (MWR) on a floating platform would complement these measurements by providing continuous vertical profiles of temperature and humidity, enabling in-situ characterization of atmospheric stability. Atmospheric stability strongly influences boundary-layer structure, wind shear, and wake development and is therefore important for offshore wind resource assessment and modeling.This study investigates the feasibility of such a concept by assessing the influence of platform motion on MWR measurements, which are used to derive stability parameter, such as the bulk Richardson number. Measurements from a motion-table-mounted, moving, uncompensated MWR are compared with those from a stationary system of the same type in an onshore experiment.The results quantify the impact of platform motion on retrieved profiles and evaluate whether motion compensation is required for reliable deployment of MWR systems on floating platforms. The analysis includes controlled sinusoidal motion patterns (roll, pitch, and combined pitch \& roll) at three intensity levels, as well as realistic motion derived from floating platform measurements. The findings of this work contribute to the assessment of the feasibility of integrating MWR systems into floating platforms for offshore wind applications.
- Open Access
- 1 May 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3224 (2)
Full Reynolds Stress Tensor Recovery from a Floating Five-Beam Pulsed Lidar
Accurate characterization of atmospheric turbulence is essential for wind energy applications, influencing turbine design, load assessment, and wake modeling. Floating lidar systems offer a cost-effective alternative to offshore meteorological masts, but their turbulence measurements are affected by several factors, including spatial averaging, sequential scanning, platform motion and lidar configuration. This study introduces an N-beam method that exploits platform motion to derive the full Reynolds stress tensor from a commercially available five-beam pulsed lidar. The approach constructs a large set of effective beam orientations within each averaging period using deterministically motion compensated line-of-sight data, and estimates the second-order turbulence statistics through an overdetermined least-squares system. The method is evaluated against a sonic-anemometer reference and a standard velocity-azimuth-display (VAD) retrieval as benchmark. Compared to the VAD benchmark, the N-beam method significantly improves the estimation of velocity variances and therefore turbulence intensity (TI), reducing inter-beam contamination and achieving close agreement with the sonic reference. Velocity covariance retrievals show limited improvement, reflecting fundamental constraints of sequential lidar scanning. Future work should include stability-dependent error analyses and comparisons with measurements derived from a fixed six-beam lidar. Such measurements can also be used to estimate second-order turbulence statistics through an overdetermined least-squares system, helping to isolate the effects of platform motion. Moreover, the flexibility of the N-beam framework could be leveraged to selectively limit contributing beams based on geometry, enabling the construction of virtual six-beam or other optimized configurations.
- 1 May 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3224 (2)
Open AccessFull Reynolds Stress Tensor Recovery from a Floating Five-Beam Pulsed Lidar
Accurate characterization of atmospheric turbulence is essential for wind energy applications, influencing turbine design, load assessment, and wake modeling. Floating lidar systems offer a cost-effective alternative to offshore meteorological masts, but their turbulence measurements are affected by several factors, including spatial averaging, sequential scanning, platform motion and lidar configuration. This study introduces an N-beam method that exploits platform motion to derive the full Reynolds stress tensor from a commercially available five-beam pulsed lidar. The approach constructs a large set of effective beam orientations within each averaging period using deterministically motion compensated line-of-sight data, and estimates the second-order turbulence statistics through an overdetermined least-squares system. The method is evaluated against a sonic-anemometer reference and a standard velocity-azimuth-display (VAD) retrieval as benchmark. Compared to the VAD benchmark, the N-beam method significantly improves the estimation of velocity variances and therefore turbulence intensity (TI), reducing inter-beam contamination and achieving close agreement with the sonic reference. Velocity covariance retrievals show limited improvement, reflecting fundamental constraints of sequential lidar scanning. Future work should include stability-dependent error analyses and comparisons with measurements derived from a fixed six-beam lidar. Such measurements can also be used to estimate second-order turbulence statistics through an overdetermined least-squares system, helping to isolate the effects of platform motion. Moreover, the flexibility of the N-beam framework could be leveraged to selectively limit contributing beams based on geometry, enabling the construction of virtual six-beam or other optimized configurations.
- Open Access
- 27 November 2025
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 10 (11) , 2791-2820
Evaluating the impact of motion compensation on turbulence intensity measurements from continuous-wave and pulsed floating lidars
Floating lidar systems (FLSs) play a crucial role in offshore wind resource assessment, offering a cost-effective and flexible alternative to traditional meteorological masts. While wind speed and wind direction measurements from FLSs demonstrate high accuracy without further in-depth correction required, platform motion introduces systematic overestimation of turbulence intensity (TI), requiring compensation to ensure reliability. This study presents the first published report of an offshore deployment of a pulsed FLS operating at 5 Hz effective sampling frequency with full deterministic motion compensation. A side-by-side comparison was conducted with a continuous-wave (cw) FLS of the same platform type under identical offshore conditions. Both systems were benchmarked against a met mast cup anemometer reference, with a fixed cw lidar included for plausibility checks. Performance was evaluated using a comprehensive multi-metric framework, including regression analyses, absolute and relative error measures (MBE, MRBE, RMSE, RRMSE), representative TI error (Q90 error), and quantile-based distribution analysis. While it is well established that deterministic motion compensation improves TI estimates from floating cw lidars, this study demonstrates for the first time that the same approach, when applied to pulsed systems operating at 5 Hz, yields TI bias convergence with floating cw lidars relative to a met mast reference under identical offshore conditions. After compensation, floating cw and pulsed TI bias converged towards the cup reference with no systematic ranking, while the pulsed system showed a modest but consistent advantage in scatter-based metrics. A central finding is that effective sampling frequency is a decisive configuration parameter for pulsed systems: empirical evidence demonstrates that a 5 Hz operation adequately resolves turbulence and motion timescales, achieving industry-relevant TI accuracy. In contrast, 1 Hz undersamples these processes and consistently overestimates TI, whereas 50 Hz cw scanning provides no decisive benefit beyond 5 Hz. These results establish deterministic motion compensation as a transparent and effective baseline for offshore FLS turbulence assessment. For pulsed deployments, a 5 Hz configuration is sufficient, while residual scatter remains the main limitation. Future work should refine the compensation algorithm by accounting for lidar sensitivities and improving sensor synchronization, while broadening validation across platform types, sea states, and lidar configurations. Another important direction is the systematic comparison of different motion-compensation types under identical sea-state and platform-response conditions. Sensitivity studies of motion characteristics, atmospheric stability, and lidar parameters are also needed. Machine learning post-processing may be explored as a complementary tool to further reduce dispersion.
- 27 November 2025
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 10 (11) , 2791-2820
Open AccessEvaluating the impact of motion compensation on turbulence intensity measurements from continuous-wave and pulsed floating lidars
Floating lidar systems (FLSs) play a crucial role in offshore wind resource assessment, offering a cost-effective and flexible alternative to traditional meteorological masts. While wind speed and wind direction measurements from FLSs demonstrate high accuracy without further in-depth correction required, platform motion introduces systematic overestimation of turbulence intensity (TI), requiring compensation to ensure reliability. This study presents the first published report of an offshore deployment of a pulsed FLS operating at 5 Hz effective sampling frequency with full deterministic motion compensation. A side-by-side comparison was conducted with a continuous-wave (cw) FLS of the same platform type under identical offshore conditions. Both systems were benchmarked against a met mast cup anemometer reference, with a fixed cw lidar included for plausibility checks. Performance was evaluated using a comprehensive multi-metric framework, including regression analyses, absolute and relative error measures (MBE, MRBE, RMSE, RRMSE), representative TI error (Q90 error), and quantile-based distribution analysis. While it is well established that deterministic motion compensation improves TI estimates from floating cw lidars, this study demonstrates for the first time that the same approach, when applied to pulsed systems operating at 5 Hz, yields TI bias convergence with floating cw lidars relative to a met mast reference under identical offshore conditions. After compensation, floating cw and pulsed TI bias converged towards the cup reference with no systematic ranking, while the pulsed system showed a modest but consistent advantage in scatter-based metrics. A central finding is that effective sampling frequency is a decisive configuration parameter for pulsed systems: empirical evidence demonstrates that a 5 Hz operation adequately resolves turbulence and motion timescales, achieving industry-relevant TI accuracy. In contrast, 1 Hz undersamples these processes and consistently overestimates TI, whereas 50 Hz cw scanning provides no decisive benefit beyond 5 Hz. These results establish deterministic motion compensation as a transparent and effective baseline for offshore FLS turbulence assessment. For pulsed deployments, a 5 Hz configuration is sufficient, while residual scatter remains the main limitation. Future work should refine the compensation algorithm by accounting for lidar sensitivities and improving sensor synchronization, while broadening validation across platform types, sea states, and lidar configurations. Another important direction is the systematic comparison of different motion-compensation types under identical sea-state and platform-response conditions. Sensitivity studies of motion characteristics, atmospheric stability, and lidar parameters are also needed. Machine learning post-processing may be explored as a complementary tool to further reduce dispersion.
- Open Access
- 3 April 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-44
Evaluating the Impact of Motion Compensation on Turbulence Intensity Measurements from Continuous-Wave and Pulsed Floating Lidars
Floating Lidar Systems (FLS) play a crucial role in offshore wind resource assessment, offering a cost-effective and flexible alternative to traditional meteorological masts. While wind speed and direction measurements from FLS demonstrate high accuracy without further in-depth correction required, platform motions introduce systematic overestimation of turbulence intensity (TI). This motion-induced bias requires compensation techniques to ensure reliable TI measurements. This study evaluates the impact of a deterministic motion compensation algorithm on TI measurements from two FLS of the same type, equipped with different lidar types: a continuous-wave (cw) lidar and a pulsed lidar. The analysis compares raw and motion-compensated TI data against reference measurements from a fixed cw lidar and a met mast cup anemometer. A comprehensive evaluation is conducted using multiple performance metrics, including Regression Analysis, Mean Bias Error (MBE), Mean Relative Bias Error (MRBE), Root Mean Square Error (RMSE), Relative Root Mean Square Error (RRMSE), Representative TI Error, and Quantile-based distribution analysis. The results show that the applied motion compensation significantly reduces the overestimation of TI, with the pulsed lidar exhibiting the most substantial relative improvement across various metrics. The cw lidar, while also benefiting from motion compensation, demonstrates a closer alignment with the fixed lidar in terms of absolute bias reduction. Despite these improvements, residual discrepancies remain, attributed to differences in measurement principles, remaining motion effects, lidar-specific characteristics and sensitivities. Our findings confirm that deterministic motion compensation can enhance the reliability of FLS-derived TI measurements, bringing them closer to those obtained from a fixed lidar system. Future work should focus on refining compensation algorithms by incorporating lidar-specific sensitivities, improving sensor time synchronization, and exploring machine learning-based enhancements for an even better agreement with a met mast reference.
- 3 April 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-44
Open AccessEvaluating the Impact of Motion Compensation on Turbulence Intensity Measurements from Continuous-Wave and Pulsed Floating Lidars
Floating Lidar Systems (FLS) play a crucial role in offshore wind resource assessment, offering a cost-effective and flexible alternative to traditional meteorological masts. While wind speed and direction measurements from FLS demonstrate high accuracy without further in-depth correction required, platform motions introduce systematic overestimation of turbulence intensity (TI). This motion-induced bias requires compensation techniques to ensure reliable TI measurements. This study evaluates the impact of a deterministic motion compensation algorithm on TI measurements from two FLS of the same type, equipped with different lidar types: a continuous-wave (cw) lidar and a pulsed lidar. The analysis compares raw and motion-compensated TI data against reference measurements from a fixed cw lidar and a met mast cup anemometer. A comprehensive evaluation is conducted using multiple performance metrics, including Regression Analysis, Mean Bias Error (MBE), Mean Relative Bias Error (MRBE), Root Mean Square Error (RMSE), Relative Root Mean Square Error (RRMSE), Representative TI Error, and Quantile-based distribution analysis. The results show that the applied motion compensation significantly reduces the overestimation of TI, with the pulsed lidar exhibiting the most substantial relative improvement across various metrics. The cw lidar, while also benefiting from motion compensation, demonstrates a closer alignment with the fixed lidar in terms of absolute bias reduction. Despite these improvements, residual discrepancies remain, attributed to differences in measurement principles, remaining motion effects, lidar-specific characteristics and sensitivities. Our findings confirm that deterministic motion compensation can enhance the reliability of FLS-derived TI measurements, bringing them closer to those obtained from a fixed lidar system. Future work should focus on refining compensation algorithms by incorporating lidar-specific sensitivities, improving sensor time synchronization, and exploring machine learning-based enhancements for an even better agreement with a met mast reference.
- Open Access
- 27 November 2024
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 9 (11) , 2217-2233
Understanding the impact of data gaps on long-term offshore wind resource estimates
In the context of a wind farm project, the wind resource is assessed to predict the power output and the optimal positioning of wind turbines. This requires taking wind measurements on the site of interest and extrapolating these to the long term using so-called “measure, correlate, and predict” (MCP) methods. Sensor, power supply, and software failures are common phenomena. These disruptions cause gaps in the measured data, which can especially be long in offshore measurement campaigns due to harsh weather conditions causing system failures and preventing servicing and redeployment. The present study investigates the effect of measurement data gaps on long-term offshore wind estimates by analyzing the bias they introduce in the parameters commonly used for wind resource assessment. Furthermore, it aims to show how filling the gaps can mitigate their effect. To achieve this, we perform investigations for three offshore sites in Europe with 2 years of concurrent measurements. We use reanalysis data and various MCP methods to fill gaps in the measured data and extrapolate these data to the long term. Current standards demand high data availability (80 % or 90 %) for wind measurement campaigns, so we expect that the effect of missing data on the uncertainty in long-term extrapolations is of the same order of magnitude as other uncertainty components such as the measurement uncertainty or the inter-annual variability. Nevertheless, our results show that the effects of gaps are considerably smaller than the other uncertainty components. For instance, gaps of 180 d cause an average deviation of the long-term mean wind speed of less than 0.04 m s−1 and a 95th percentile deviation of less than 0.075 m s−1 for all tested sites. Due to the low impact of gaps, gap filling does not have the potential to significantly reduce the uncertainty in the long-term extrapolation.
- 27 November 2024
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 9 (11) , 2217-2233
Open AccessUnderstanding the impact of data gaps on long-term offshore wind resource estimates
In the context of a wind farm project, the wind resource is assessed to predict the power output and the optimal positioning of wind turbines. This requires taking wind measurements on the site of interest and extrapolating these to the long term using so-called “measure, correlate, and predict” (MCP) methods. Sensor, power supply, and software failures are common phenomena. These disruptions cause gaps in the measured data, which can especially be long in offshore measurement campaigns due to harsh weather conditions causing system failures and preventing servicing and redeployment. The present study investigates the effect of measurement data gaps on long-term offshore wind estimates by analyzing the bias they introduce in the parameters commonly used for wind resource assessment. Furthermore, it aims to show how filling the gaps can mitigate their effect. To achieve this, we perform investigations for three offshore sites in Europe with 2 years of concurrent measurements. We use reanalysis data and various MCP methods to fill gaps in the measured data and extrapolate these data to the long term. Current standards demand high data availability (80 % or 90 %) for wind measurement campaigns, so we expect that the effect of missing data on the uncertainty in long-term extrapolations is of the same order of magnitude as other uncertainty components such as the measurement uncertainty or the inter-annual variability. Nevertheless, our results show that the effects of gaps are considerably smaller than the other uncertainty components. For instance, gaps of 180 d cause an average deviation of the long-term mean wind speed of less than 0.04 m s−1 and a 95th percentile deviation of less than 0.075 m s−1 for all tested sites. Due to the low impact of gaps, gap filling does not have the potential to significantly reduce the uncertainty in the long-term extrapolation.