Jan Karl
Research Subjects
Jan Karl has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Bretislav Janovsky
Faculty of Chemical Technology, University of Pardubice, 532 10 Pardubice, Czech Republic
1 shared publication - Martina Nováková
Department of Chemical Technology of Monument Conservation, Faculty of Chemical Technology , University of Chemistry and Technology , Prague , Czech Republic
1 shared publication - Michal Ďurovič
Department of Chemical Technology of Monument Conservation, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague, Czech Republic
1 shared publication - Romana Friedrichová
Technical Institute of Fire Protection, 143 00 Prague, Czech Republic
1 shared publication - Václav Vystrčil
Technical Institute of Fire Protection, Prague, Czech Republic
1 shared publication
Latest Publications
- Open Access
Preconditioning of Dust and Fluid in a 20 L Chamber During Ignition by a Chemical Ignitor
Dust explosion prevention and mitigation of the consequences thereof require measurement of dust explosion parameters. Testing methods are defined by European and American standards, producing results in explosion chambers of a 1 m3 standard volume and, alternatively, 20 L. However, the results are influenced by some processes that are neglected by the standards, perhaps because it is believed that their effect is small in a 1 m3 chamber. But their effect becomes significant in a smaller 20 L chamber. Preconditioning of the system caused by dust dispersion itself, as well as the ignitor flame, is one such problem. The aim of this work is to further investigate the physical and chemical processes caused by dust preheating after an ignitor’s action. Analytical methods, such as STA, GC/MS and FTIR, were used to analyse the composition of the atmosphere after exposure of lycopodium dust, a natural material, to certain temperatures up to 550 °C in air and nitrogen. In the second step, gas samples were taken from the 20 L chamber after dispersion of lycopodium and ignition by two 5 kJ pyrotechnical ignitors. Depending on the temperature and atmosphere, various concentrations of CO, CO2, H2O, NOx and organic compounds were measured. It was observed that the dispersed dust decomposed into mostly CO and CO2 in the area near the ignitors, even in an atmosphere in which the oxygen concentration was lower than 2% by volume. The concentrations of other organic compounds were very low and included mostly methane, ethylene and acetaldehyde. However, when incorporating CO, the overall concentration of flammables was high enough to generate a hybrid mixture.
Open AccessPreconditioning of Dust and Fluid in a 20 L Chamber During Ignition by a Chemical Ignitor
Dust explosion prevention and mitigation of the consequences thereof require measurement of dust explosion parameters. Testing methods are defined by European and American standards, producing results in explosion chambers of a 1 m3 standard volume and, alternatively, 20 L. However, the results are influenced by some processes that are neglected by the standards, perhaps because it is believed that their effect is small in a 1 m3 chamber. But their effect becomes significant in a smaller 20 L chamber. Preconditioning of the system caused by dust dispersion itself, as well as the ignitor flame, is one such problem. The aim of this work is to further investigate the physical and chemical processes caused by dust preheating after an ignitor’s action. Analytical methods, such as STA, GC/MS and FTIR, were used to analyse the composition of the atmosphere after exposure of lycopodium dust, a natural material, to certain temperatures up to 550 °C in air and nitrogen. In the second step, gas samples were taken from the 20 L chamber after dispersion of lycopodium and ignition by two 5 kJ pyrotechnical ignitors. Depending on the temperature and atmosphere, various concentrations of CO, CO2, H2O, NOx and organic compounds were measured. It was observed that the dispersed dust decomposed into mostly CO and CO2 in the area near the ignitors, even in an atmosphere in which the oxygen concentration was lower than 2% by volume. The concentrations of other organic compounds were very low and included mostly methane, ethylene and acetaldehyde. However, when incorporating CO, the overall concentration of flammables was high enough to generate a hybrid mixture.
- Open Access
- 4 April 2025
- Published by Walter de Gruyter GmbH in Restaurator. International Journal for the Preservation of Library and Archival Material
- Vol. 46 (2) , 131-144
Testing the Effectiveness of Selected Flame Retardants for Archival Cardboard Using a Medium-Scale Fire Test
Depositories of cultural institutions contain written historical documents protected by enclosures against mechanical damage, solid pollutants, the effects of light, and fluctuations in temperature and/or humidity. A potentially suitable additive flame retardant has been developed for archival cardboards to reduce the loss of valuable documents during possible fires in depositories without fixed extinguishing equipment. Archival boxes made of solid cardboard were treated with two selected additive flame retardants: a mixture of natural bentonite and mica in a cellulose ether solution and an aqueous sodium silicate solution. Subsequently a medium-scale fire test was performed on treated and untreated box samples placed in archival shelves. The test conditions simulated a fire in a relatively large depository where the oxidizing agent is present for a long time and the combustion products can leave the area. The approximate time to ignition, the decrease in mass, and the increase in temperature in various parts of the shelves were measured. The flame spreading rate was recorded and the final condition of the archival boxes and their contents was evaluated. The mixed flame retardant delayed ignition, slowed the combustion, and protected most of the archival boxes against burning; moreover, prior examination did not exhibit a substantial detrimental effect on the cardboard properties.
- 4 April 2025
- Published by Walter de Gruyter GmbH in Restaurator. International Journal for the Preservation of Library and Archival Material
- Vol. 46 (2) , 131-144
Open AccessTesting the Effectiveness of Selected Flame Retardants for Archival Cardboard Using a Medium-Scale Fire Test
Depositories of cultural institutions contain written historical documents protected by enclosures against mechanical damage, solid pollutants, the effects of light, and fluctuations in temperature and/or humidity. A potentially suitable additive flame retardant has been developed for archival cardboards to reduce the loss of valuable documents during possible fires in depositories without fixed extinguishing equipment. Archival boxes made of solid cardboard were treated with two selected additive flame retardants: a mixture of natural bentonite and mica in a cellulose ether solution and an aqueous sodium silicate solution. Subsequently a medium-scale fire test was performed on treated and untreated box samples placed in archival shelves. The test conditions simulated a fire in a relatively large depository where the oxidizing agent is present for a long time and the combustion products can leave the area. The approximate time to ignition, the decrease in mass, and the increase in temperature in various parts of the shelves were measured. The flame spreading rate was recorded and the final condition of the archival boxes and their contents was evaluated. The mixed flame retardant delayed ignition, slowed the combustion, and protected most of the archival boxes against burning; moreover, prior examination did not exhibit a substantial detrimental effect on the cardboard properties.