Muhammad Usman Khalid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammad Usman Khalid has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Matteo Zoppi
University of Genoa
5 shared publications - Mattia Frascio
Department of Mechanical, Energy, Management and Transportation Engineering (DIME), University of Genoa, Genoa, Italy
4 shared publications - Alessandro Seitone
Dipartimento di Ingegneria Meccanica, Energetica e dei Trassporti, Università degli Studi di Genova, Via All’opera Pia 15A, 16145 Genova, Italy
2 shared publications Benoît Lévesque
Department of Mechanical Engineering Université Laval Québec Canada
2 shared publications- Francesco Musiari
Department of Engineering for Industrial Systems and Technologies, University of Parma, Parco Area delle Scienze 181/A, 43121 Parma, Italy
2 shared publications - Massimiliano Avalle
Polytechnic School, Department of Mechanical, Energy, Management and Transportation Engineering University of Genoa Via all’Opera Pia 15/A 16145 Genova Italy
2 shared publications
Latest Publications
- Open Access
- 4 March 2026
- Published by Wiley in Advanced Robotics Research
- p. e202500165
Universal Gripper for Industrial Manipulation With Enhanced Rigid Mechanics and Self‐Adaptable Fingers
Soft grippers lack the precision and payload capacity required for industrial adoption, whereas most developed hybrid grippers are not suitable for harsh and versatile industrial environments, and designing a gripper capable of realizing the optimal handling of both soft and rigid objects remains a challenge. This work presents significant enhancements to our universal gripper with rigid mechanics and self‐adaptable fingers for powertrain automation and assembly applications. The redesigned self‐adaptable fingers, validated through finite element analysis and experimental testing, achieved an improvement in the wrapping capability while increasing the maximum retention force. The transformation from a four‐bar to six‐bar linkage mechanism with an integrated compliant pad eliminated rigid link interference issues, enabling articulation angles up to δ 1 = −22° and δ 2 = −15° while maintaining 95.3% force transmission efficiency. These enhancements expanded the operational capacity from 3 to 7.5 kg maximum payload and increased the grasping diameter by 23% to 270 mm. Comprehensive validation through pull‐out tests and robotic grasping experiments with objects ranging from 247 to 7500 g demonstrated the performance of the enhanced industrial gripper with 100% success rate. The enhanced gripper combines soft robotic adaptability with industrial reliability through passive compliance, enabling flexible manufacturing.
- 4 March 2026
- Published by Wiley in Advanced Robotics Research
- p. e202500165
Open AccessUniversal Gripper for Industrial Manipulation With Enhanced Rigid Mechanics and Self‐Adaptable Fingers
Soft grippers lack the precision and payload capacity required for industrial adoption, whereas most developed hybrid grippers are not suitable for harsh and versatile industrial environments, and designing a gripper capable of realizing the optimal handling of both soft and rigid objects remains a challenge. This work presents significant enhancements to our universal gripper with rigid mechanics and self‐adaptable fingers for powertrain automation and assembly applications. The redesigned self‐adaptable fingers, validated through finite element analysis and experimental testing, achieved an improvement in the wrapping capability while increasing the maximum retention force. The transformation from a four‐bar to six‐bar linkage mechanism with an integrated compliant pad eliminated rigid link interference issues, enabling articulation angles up to δ 1 = −22° and δ 2 = −15° while maintaining 95.3% force transmission efficiency. These enhancements expanded the operational capacity from 3 to 7.5 kg maximum payload and increased the grasping diameter by 23% to 270 mm. Comprehensive validation through pull‐out tests and robotic grasping experiments with objects ranging from 247 to 7500 g demonstrated the performance of the enhanced industrial gripper with 100% success rate. The enhanced gripper combines soft robotic adaptability with industrial reliability through passive compliance, enabling flexible manufacturing.
- Open Access
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 1
Design and Development of a Novel Universal Gripper having Rigid Mechanics with Self-Adaptable Fingers for Industrial Applications
In industrial assembly, intralogistics, and powertrain automation, it is essential to implement robust, safe, and efficient object-grasping solutions that are applicable to various scenarios. From this perspective, the design, kinematic analysis, and experimental evaluation of a novel three-finger universal gripper are presented in this paper. The aim of this research is to develop and validate a versatile grasping solution that combines the precision of rigid mechanics with the adaptability of soft robotics for handling diverse industrial components ranging from delicate items to complex automotive parts. The rigid mechanical structure of each finger integrates a Chebyshev-parallelogram linkage mechanism with thermoplastic polyurethane (TPU) finger for object interface. The gripper design addresses the challenge of handling diverse components through three key innovations integrated into a cohesive system: 1) a compound linkage mechanism that transforms the linear input at the Chebyshev linkage into angular motion driving the parallelogram linkage interfaced with the self-adaptable finger, maintaining near-perfect linear motion (±0.033 mm deviation) with a 6.06:1 mechanical advantage; 2) a modular design enabling rapid reconfiguration between parallel, equiangular, and envelope grasping configurations; and 3) independent actuation of each finger for asymmetric object handling. Moreover, the Fin Ray–inspired fingertip enables an overall lightweight gripper design with firm grasping capability, self-adaptivity, and finer object manipulation. Three soft finger designs were characterized through compression testing at multiple positions, revealing significant performance differences, with one finger demonstrating superior overall performance and selected for gripper integration. Tensile pull-out tests using the equiangular configuration demonstrated retention capabilities with peak forces of 45-77 N and sustained forces of 15-25 N, translating to practical load capacities of 1.5-2.5 kg. Furthermore, the gripper’s performance was validated through integration with a six degrees of freedom (6DOF) industrial robot, grasping objects ranging from delicate items like an orange to automotive components like a clutch plate. Objects weighing up to approximately 2.5 kg were grasped reliably, whereas objects exceeding 3 kg showed minor occasional slippage. The universal gripper weighs less than 3 kg and features integrated stepper motors with Modbus RTU control, thus offering a practical solution for industrial environments requiring versatile and adaptive handling.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 1
Open AccessDesign and Development of a Novel Universal Gripper having Rigid Mechanics with Self-Adaptable Fingers for Industrial Applications
In industrial assembly, intralogistics, and powertrain automation, it is essential to implement robust, safe, and efficient object-grasping solutions that are applicable to various scenarios. From this perspective, the design, kinematic analysis, and experimental evaluation of a novel three-finger universal gripper are presented in this paper. The aim of this research is to develop and validate a versatile grasping solution that combines the precision of rigid mechanics with the adaptability of soft robotics for handling diverse industrial components ranging from delicate items to complex automotive parts. The rigid mechanical structure of each finger integrates a Chebyshev-parallelogram linkage mechanism with thermoplastic polyurethane (TPU) finger for object interface. The gripper design addresses the challenge of handling diverse components through three key innovations integrated into a cohesive system: 1) a compound linkage mechanism that transforms the linear input at the Chebyshev linkage into angular motion driving the parallelogram linkage interfaced with the self-adaptable finger, maintaining near-perfect linear motion (±0.033 mm deviation) with a 6.06:1 mechanical advantage; 2) a modular design enabling rapid reconfiguration between parallel, equiangular, and envelope grasping configurations; and 3) independent actuation of each finger for asymmetric object handling. Moreover, the Fin Ray–inspired fingertip enables an overall lightweight gripper design with firm grasping capability, self-adaptivity, and finer object manipulation. Three soft finger designs were characterized through compression testing at multiple positions, revealing significant performance differences, with one finger demonstrating superior overall performance and selected for gripper integration. Tensile pull-out tests using the equiangular configuration demonstrated retention capabilities with peak forces of 45-77 N and sustained forces of 15-25 N, translating to practical load capacities of 1.5-2.5 kg. Furthermore, the gripper’s performance was validated through integration with a six degrees of freedom (6DOF) industrial robot, grasping objects ranging from delicate items like an orange to automotive components like a clutch plate. Objects weighing up to approximately 2.5 kg were grasped reliably, whereas objects exceeding 3 kg showed minor occasional slippage. The universal gripper weighs less than 3 kg and features integrated stepper motors with Modbus RTU control, thus offering a practical solution for industrial environments requiring versatile and adaptive handling.
- 25 June 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (3-4) , 1711-1721
Design and fabrication of resistive sensor using additive manufacturing techniques for robotic application
- 25 June 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (3-4) , 1711-1721
Design and fabrication of resistive sensor using additive manufacturing techniques for robotic application
- Open Access
- 5 May 2025
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 9 (5) , 151
Thermal Curing of Adhesive Joints Enabled by Precision Heating Multi-Material Additive Manufacturing
This study explores the development of adhesive joints incorporating embedded resistive heating elements, fabricated using Multi-Material Additive Manufacturing. By embedding conductive circuits within the adherends, localized heating enables controlled curing of the adhesive, optimizing its mechanical properties according to the specific application. This study focused on modifying the stiffness of the adhesive in order to reduce edge effects in the joints and allow for better load distribution. The adherends were made of PLA, the resistive heating elements were fabricated using carbon black-filled conductive PLA, and an epoxy resin served as the adhesive. Thermal and mechanical characterizations were conducted, evaluating the effects of different curing temperatures on joint strength. The tensile strength for joints cured at 120 °C exhibited a 58% increase in maximum breaking force and a 144% increase in elongation at break compared to the joints cured at room temperature. These findings highlight the potential of AM-integrated resistive heating for precise adhesive curing, enabling the local tailoring of the adhesive stiffness in the overlap volume.
- 5 May 2025
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 9 (5) , 151
Open AccessThermal Curing of Adhesive Joints Enabled by Precision Heating Multi-Material Additive Manufacturing
This study explores the development of adhesive joints incorporating embedded resistive heating elements, fabricated using Multi-Material Additive Manufacturing. By embedding conductive circuits within the adherends, localized heating enables controlled curing of the adhesive, optimizing its mechanical properties according to the specific application. This study focused on modifying the stiffness of the adhesive in order to reduce edge effects in the joints and allow for better load distribution. The adherends were made of PLA, the resistive heating elements were fabricated using carbon black-filled conductive PLA, and an epoxy resin served as the adhesive. Thermal and mechanical characterizations were conducted, evaluating the effects of different curing temperatures on joint strength. The tensile strength for joints cured at 120 °C exhibited a 58% increase in maximum breaking force and a 144% increase in elongation at break compared to the joints cured at room temperature. These findings highlight the potential of AM-integrated resistive heating for precise adhesive curing, enabling the local tailoring of the adhesive stiffness in the overlap volume.
- Open Access
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 68492-68508
A Camera-Embedded Self-Adaptable Finger With Multi-Modal Sensing Capabilities for Robotic Manipulation
This work introduces a novel vision-based sensing approach for self-adaptable soft fingers using an embedded camera, demonstrating proprioceptive and exteroceptive capabilities. The system achieves normal force estimation, Z-displacement estimation, slip detection, and force application position classification by integrating the Pi Camera V3 sensor into the structure of an additively manufactured self-adaptable soft finger. Our approach avoids the deformation disambiguation required in elastomer-based sensors by enabling direct deformation sensing without additional sensing layers like a silicon pad that alters the finger’s compliant characteristics. The system also overcomes the occlusion limitations inherent in external camera-based methods by observing structural changes through strategically placed dot patterns within the finger’s internal geometry, which are visible to the embedded camera. The camera mounting position was verified using Finite Element Analysis (FEA) while ensuring finger compliance and as much deformation as possible without touching the camera. We combined two algorithms: an optical flow-based method for reliably detecting slip events and a Convolutional Neural Network (CNN) for force, displacement estimation, and position classification. The slip detection algorithm uses a dual-threshold approach that combines the Median Absolute Deviation (MAD) and standard deviation. Customized rigs integrated with a Universal Testing Machine (UTM) were used for sensor characterization, dataset acquisition, and slip detection parameter optimization. Furthermore, the system was validated through integration with an industrial gripper in an experimental sequence on different object types to mimic real-world manipulation, where both algorithms were integrated and deployed on Raspberry Pi 5 to achieve proprioceptive and exteroceptive sensing. Reliable performance was achieved with slip detection operating at 28.5 Hz and CNN update rate of 8 Hz. The experimental results demonstrate the effectiveness of the proposed system for both sensing modalities. This study presents a compact, integrated solution that maintains the inherent compliant characteristics of the self-adaptable finger while providing feedback for real-world manipulation tasks.
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 68492-68508
Open AccessA Camera-Embedded Self-Adaptable Finger With Multi-Modal Sensing Capabilities for Robotic Manipulation
This work introduces a novel vision-based sensing approach for self-adaptable soft fingers using an embedded camera, demonstrating proprioceptive and exteroceptive capabilities. The system achieves normal force estimation, Z-displacement estimation, slip detection, and force application position classification by integrating the Pi Camera V3 sensor into the structure of an additively manufactured self-adaptable soft finger. Our approach avoids the deformation disambiguation required in elastomer-based sensors by enabling direct deformation sensing without additional sensing layers like a silicon pad that alters the finger’s compliant characteristics. The system also overcomes the occlusion limitations inherent in external camera-based methods by observing structural changes through strategically placed dot patterns within the finger’s internal geometry, which are visible to the embedded camera. The camera mounting position was verified using Finite Element Analysis (FEA) while ensuring finger compliance and as much deformation as possible without touching the camera. We combined two algorithms: an optical flow-based method for reliably detecting slip events and a Convolutional Neural Network (CNN) for force, displacement estimation, and position classification. The slip detection algorithm uses a dual-threshold approach that combines the Median Absolute Deviation (MAD) and standard deviation. Customized rigs integrated with a Universal Testing Machine (UTM) were used for sensor characterization, dataset acquisition, and slip detection parameter optimization. Furthermore, the system was validated through integration with an industrial gripper in an experimental sequence on different object types to mimic real-world manipulation, where both algorithms were integrated and deployed on Raspberry Pi 5 to achieve proprioceptive and exteroceptive sensing. Reliable performance was achieved with slip detection operating at 28.5 Hz and CNN update rate of 8 Hz. The experimental results demonstrate the effectiveness of the proposed system for both sensing modalities. This study presents a compact, integrated solution that maintains the inherent compliant characteristics of the self-adaptable finger while providing feedback for real-world manipulation tasks.
- Open Access
Investigating Multi-Material Additive Manufacturing for Disassembly and Reparability of Adhesive Joints by Precision Heating
Additive manufacturing enables new design solutions across various engineering fields. This work presents a method to enhance the sustainability of adhesive joints by designing joints that can be disassembled and repaired multiple times. The approach involves the use of a Multi-Material Additive Manufacturing process to produce substrates with integrated circuits and electrical resistance, printed using a conductive filament. This resistance can be used to heat the thermoplastic adhesive layer up to 110 °C, allowing for reversibility in the assembly process and enabling joint re-use and repair without constraints on the component’s materials and thicknesses. The joints tested after successive assembly/disassembly operations reach maximum strength during the first iteration, which decreases by around 50% after five repair iterations. The focus of the work is on the feasibility of this process, but it is expected that performance can be improved after process optimization. This result could be highly valuable for enabling component in-service healing and the design for demanufacturing and remanufacturing.
Open AccessInvestigating Multi-Material Additive Manufacturing for Disassembly and Reparability of Adhesive Joints by Precision Heating
Additive manufacturing enables new design solutions across various engineering fields. This work presents a method to enhance the sustainability of adhesive joints by designing joints that can be disassembled and repaired multiple times. The approach involves the use of a Multi-Material Additive Manufacturing process to produce substrates with integrated circuits and electrical resistance, printed using a conductive filament. This resistance can be used to heat the thermoplastic adhesive layer up to 110 °C, allowing for reversibility in the assembly process and enabling joint re-use and repair without constraints on the component’s materials and thicknesses. The joints tested after successive assembly/disassembly operations reach maximum strength during the first iteration, which decreases by around 50% after five repair iterations. The focus of the work is on the feasibility of this process, but it is expected that performance can be improved after process optimization. This result could be highly valuable for enabling component in-service healing and the design for demanufacturing and remanufacturing.