Tao Xia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tao Xia has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Yao Pan
National University of Defense Technology
6 shared publications - Jingyu Li
National University of Defense Technology
5 shared publications - Xingyuan Tang
National University of Defense Technology
5 shared publications - Hui Luo
National University of Defense Technology
4 shared publications - Pengbo Xiao
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
4 shared publications - Jie Yuan
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha, China
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (21) , 32142-32154
An Integrated Self-Calibration Scheme for Online Damping Asymmetry Compensation in Hemispherical Resonator Gyroscopes
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (21) , 32142-32154
An Integrated Self-Calibration Scheme for Online Damping Asymmetry Compensation in Hemispherical Resonator Gyroscopes
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (20) , 30126-30135
Continuous Annular Ion Beam Balancing of Assembled Hemispherical Resonator Gyroscopes Achieving 0.063 mHz Ultralow Frequency Split
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (20) , 30126-30135
Continuous Annular Ion Beam Balancing of Assembled Hemispherical Resonator Gyroscopes Achieving 0.063 mHz Ultralow Frequency Split
- 6 December 2025
- Published by Elsevier in Measurement
- Vol. 262
Identification and compensation of phase imbalance errors in hemispherical resonator gyroscopes
- 6 December 2025
- Published by Elsevier in Measurement
- Vol. 262
Identification and compensation of phase imbalance errors in hemispherical resonator gyroscopes
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (18) , 34468-34479
Online Calibration of the Virtual Rotation Rate for Whole-Angle Hemispherical Resonator Gyroscopes Based on a Dual-Gyro Configuration
Virtual rotation plays a crucial role in compensating for circumferential errors of the hemispherical resonator gyroscope (HRG) operating in whole-angle (WA) mode. To eliminate undesirable effects introduced by rotation modulation, online virtual rotation rate estimation becomes the primary challenge. However, the difficulty lies in accurately resolving virtual rotation rate amidst the mixed outputs of virtual rotation and external rotation. This article provides a systematic analysis of the error mechanism in virtual rotation. To address the challenge of online virtual rotation rate estimation, a novel solution based on a dual-gyro configuration with an asynchronous virtual rotation modulation scheme is proposed and implemented. Experimental results demonstrate the superior performance enhancement achieved by this calibration scheme. In the presence of external disturbances, the signal-to-noise ratio (SNR) of precession angle measurements exhibits a remarkable 12.28-fold improvement. The maximum residual ranges of angular rate also show an average 13.86-fold improvement.
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (18) , 34468-34479
Online Calibration of the Virtual Rotation Rate for Whole-Angle Hemispherical Resonator Gyroscopes Based on a Dual-Gyro Configuration
Virtual rotation plays a crucial role in compensating for circumferential errors of the hemispherical resonator gyroscope (HRG) operating in whole-angle (WA) mode. To eliminate undesirable effects introduced by rotation modulation, online virtual rotation rate estimation becomes the primary challenge. However, the difficulty lies in accurately resolving virtual rotation rate amidst the mixed outputs of virtual rotation and external rotation. This article provides a systematic analysis of the error mechanism in virtual rotation. To address the challenge of online virtual rotation rate estimation, a novel solution based on a dual-gyro configuration with an asynchronous virtual rotation modulation scheme is proposed and implemented. Experimental results demonstrate the superior performance enhancement achieved by this calibration scheme. In the presence of external disturbances, the signal-to-noise ratio (SNR) of precession angle measurements exhibits a remarkable 12.28-fold improvement. The maximum residual ranges of angular rate also show an average 13.86-fold improvement.
- 14 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (16) , 30524-30535
Temperature-Dependent Bias Drift Compensation Based on a Dual Hemispherical Resonator Gyroscope System
Hemispherical resonator gyroscopes (HRGs) exhibit exceptional force-to-rebalance (FTR) precision but suffer from temperature-dependent drift, limiting widespread deployment. This study presents a temperature-dependent bias drift compensation method for HRGs using a dual-HRG system configuration. The dual-HRG system compensates for temperature-dependent bias drift based on mode reversal. By implementing alternating mode-reversal control sequences between two HRGs, the dual-HRG system overcomes the limitations of single HRG mode reversal in practical applications. Furthermore, based on the calibration results of phase delay errors, electrode errors and scale factors (SFs) at different temperatures, corresponding temperature compensation modules are incorporated into the dual-HRG system. The residual temperature-dependent bias drift is further compensated by applying the multiple regression algorithm. Experimental results demonstrate that the bias stability of the dual-HRG system after mode reversal is improved by more than 98.7% and 87.7% compared to the two individual HRGs, respectively. Moreover, the temperature-dependent bias drift is further compensated by the multiple regression algorithm, and the bias stability of the dual-HRG system is improved by more than 70.5%.
- 14 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (16) , 30524-30535
Temperature-Dependent Bias Drift Compensation Based on a Dual Hemispherical Resonator Gyroscope System
Hemispherical resonator gyroscopes (HRGs) exhibit exceptional force-to-rebalance (FTR) precision but suffer from temperature-dependent drift, limiting widespread deployment. This study presents a temperature-dependent bias drift compensation method for HRGs using a dual-HRG system configuration. The dual-HRG system compensates for temperature-dependent bias drift based on mode reversal. By implementing alternating mode-reversal control sequences between two HRGs, the dual-HRG system overcomes the limitations of single HRG mode reversal in practical applications. Furthermore, based on the calibration results of phase delay errors, electrode errors and scale factors (SFs) at different temperatures, corresponding temperature compensation modules are incorporated into the dual-HRG system. The residual temperature-dependent bias drift is further compensated by applying the multiple regression algorithm. Experimental results demonstrate that the bias stability of the dual-HRG system after mode reversal is improved by more than 98.7% and 87.7% compared to the two individual HRGs, respectively. Moreover, the temperature-dependent bias drift is further compensated by the multiple regression algorithm, and the bias stability of the dual-HRG system is improved by more than 70.5%.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Separation, Identification, and Compensation of Damping, Detection, and Actuation Errors for Rate-Integrating Hemispherical Resonator Gyroscopes
Damping mismatch, detection error, and actuation error are the primary sources of the output drift in rate-integrating hemispherical resonator gyroscopes (HRGs). To date, separating the three errors remains a challenge, which hinders the accurate compensation of HRGs. This article proposes a novel method to separate the damping, detection, and actuation errors of HRGs. Theoretically, a dynamics model of HRGs considering the three errors is developed, where the detection and actuation errors are modeled using Fourier analysis. The effects of these three errors on the scale factor and the bias under different operation modes are discussed in detail for the first time. It is found that the three errors can be decoupled under the decay with quadrature control (DQC) mode, a special operation mode designed in this article. In the experiments, by measuring the angle dependence of the scale factor and the bias of the energy loop, the damping, detection, and actuation errors of three HRGs are successfully identified and then comprehensively compensated. For one typical tested HRG, after compensation, the angle-dependent error of the scale factor decreases from 1.08% to 0.036% by a factor of 30, the angle-dependent variation of the static drift reduces from $5.14 \times 10^{-3} \; ^{\circ }$ /s to $2.37 \times 10^{-4} \; ^{\circ }$ /s by a factor of 22, and the fluctuation of the dynamic output at different input rates decreases 14–25 times. Our method can also be conveniently applied to other rate-integrating Coriolis vibrating gyroscopes (CVGs).
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Separation, Identification, and Compensation of Damping, Detection, and Actuation Errors for Rate-Integrating Hemispherical Resonator Gyroscopes
Damping mismatch, detection error, and actuation error are the primary sources of the output drift in rate-integrating hemispherical resonator gyroscopes (HRGs). To date, separating the three errors remains a challenge, which hinders the accurate compensation of HRGs. This article proposes a novel method to separate the damping, detection, and actuation errors of HRGs. Theoretically, a dynamics model of HRGs considering the three errors is developed, where the detection and actuation errors are modeled using Fourier analysis. The effects of these three errors on the scale factor and the bias under different operation modes are discussed in detail for the first time. It is found that the three errors can be decoupled under the decay with quadrature control (DQC) mode, a special operation mode designed in this article. In the experiments, by measuring the angle dependence of the scale factor and the bias of the energy loop, the damping, detection, and actuation errors of three HRGs are successfully identified and then comprehensively compensated. For one typical tested HRG, after compensation, the angle-dependent error of the scale factor decreases from 1.08% to 0.036% by a factor of 30, the angle-dependent variation of the static drift reduces from $5.14 \times 10^{-3} \; ^{\circ }$ /s to $2.37 \times 10^{-4} \; ^{\circ }$ /s by a factor of 22, and the fluctuation of the dynamic output at different input rates decreases 14–25 times. Our method can also be conveniently applied to other rate-integrating Coriolis vibrating gyroscopes (CVGs).