PKPratibha Kumari

Pratibha Kumari

*This is an algorithmically generated author record based on publicly available information.

Pratibha Kumari has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fuzzy Fault-Tree Analysis of Hybrid Battery Thermal Management System of Electric Vehicles Using Phase Change Material (PCM)

    by Shujaat Husain, Haroon Ashfaq, Mohammad Asjad, Akhilesh Singh, Pratibha Kumari, Rajeev Kumar

    The growing adoption of electric vehicles highlights the need for safe and reliable battery thermal management. Hybrid battery thermal management systems (HBTMSs) that combine phase change material (PCM) with liquid cooling improve thermal regulation but also increase reliability challenges due to added component complexity. This research applies fuzzy fault-tree analysis (FFTA) to a hybrid PCM liquid BTMS by extending a previously developed and evaluated deterministic fault tree into the fuzzy domain. Basic events with limited failure rate data are quantified using expert elicitation, linguistic variables, consistency-based weighting, and centre-of-area defuzzification. The baseline point-estimate top event probability is 0.150821 as a dimensionless conditional estimate under the adopted fault-tree structure and input assumptions, while fuzzy-bound propagation produces an uncertainty interval from 0.083095 to 0.276142, with a modal coordinate estimate of 0.150824. Complementary reliability analyses were conducted to examine dominant failure modes, uncertainty propagation, and opportunities for improvement. An additional fuzzy-spread and interval-sensitivity assessment distinguished the relative uncertainty of individual basic-event probabilities from their influence on the overall top event uncertainty, identifying BE10 and BE3 as the most influential events for reducing the propagated uncertainty interval. Sensitivity assessments involving alternative expert-weighting parameters and selected dependent basic-event pairs provided additional examination of the influence of modelling assumptions. Within the adopted model, PCM leakage in the tank and module received the highest reliability priority, followed by bearing failure, transducer drift, PCM degradation, relay inaction, and operational transients. The proposed framework provides an uncertainty-aware, action-oriented foundation for reliability-driven HBTMS design improvement.

  • Advanced Thermal Spray Coating Technologies: Innovations, Material Developments, and Engineering Applications for High-Performance Coatings

    by Kumari Archana, Amit Kumar, Pratibha Kumari

    Thermal spray coating technologies have emerged as a critical solution for enhancing the performance and durability of engineering components across industries such as aerospace, automotive, and energy. This review systematically examines recent advancements in thermal spray techniques, including flame spray, plasma spray, High-Velocity Oxy-Fuel (HVOF), and wire arc spray, focusing on their working principles, advantages, and inherent limitations. It emphasizes innovative advancements in plasma spraying, including ultra-hot metallic droplets and in-situ deoxidizing mechanisms, which markedly enhance coating quality and interfacial adhesion. Thermal barrier coatings provide thermal insulation by reducing heat transfer and substrate temperature, whereas high-temperature protective coatings mainly protect materials against oxidation, corrosion, wear, and chemical degradation at elevated temperatures. The methodology involves a comprehensive analysis of characterization techniques, including microstructural evaluation, mechanical property assessment, and performance testing, to provide a holistic understanding of coating behavior under operational conditions. Our work contributes to the field by consolidating recent breakthroughs in bulk-like dense metal coatings and nanostructured coatings, offering insights into their engineering applications. The findings underscore the potential of advanced thermal spray technologies to address challenges in extreme environments, thereby enabling the development of high-performance coatings with tailored properties. Researchers and practitioners interested in using these technologies for next-gen material solutions will find this review invaluable.

  • Open Access

    Reliability Analysis of a PCM–Liquid Hybrid Battery Thermal Management System for Electric Vehicles

    by Shujaat Husain, Haroon Ashfaq, Mohammad Asjad, Pratibha Kumari, Rajeev Kumar

    Electric vehicles (EVs) utilize batteries that generate thermal energy during charging and discharging processes. Inadequate heat management can result in thermal runaway, which is marked by a rapid and uncontrolled increase in battery temperature and may lead to fire or explosion. Battery Thermal Management Systems (BTMSs) are implemented to reduce the risk of thermal runaway by maintaining battery temperature within a defined safe operating range. Hybrid BTMS configurations integrate multiple cooling methods to enhance operational effectiveness and reliability, surpassing the performance of conventional liquid coolant systems. This work investigates the enhanced efficiency of an integrated phase change material (PCM)–liquid hybrid approach evaluated under severe 3C discharge conditions over a 10,000 h operational reliability window. Our study carefully investigates the system-level reliability using a Functional Fault Tree Analysis (FTA) framework to classify top, intermediate, and basic events. Multi-physics and probabilistic evaluation results demonstrate that the hybrid system achieves a 5 °C reduction in peak cell temperature and a 3 °C improvement in spatial temperature uniformity compared to standard liquid cooling. Reliability assessment establishes a system top-event failure probability of 6% over the 10,000 h window, identifying the coolant pump as the primary failure bottleneck with an individual contribution of 27%. These quantitative insights advance our understanding of hybrid safety architectures, providing essential baseline metrics for future electric vehicle thermal management development.


  • OPTIMIZATION OF THERMAL SPRAYING WELDING USING ENTROPY-k-MEANS ANALYSIS FOR SUSTAINABLE MANUFACTURING WITH BIOMASS-BASED NANOCOMPOSITE COATINGS

    by Tasleem Ahmad, Tasmeem Ahmad Khan, Pratibha Kumari, Praveen Pachauri

    In sustainable welding, using eco-friendly coating materials is crucial, especially in the thermal spraying welding process which employs different materials. The welding arc’s radiation affects the material’s surface, while convection currents help distribute heat. This study used k-means clustering, computer modeling, and entropy-based simulation to analyze the thermal spraying process, showing its effectiveness in optimizing welding outcomes. Entropy weightage analysis revealed that environmental impact achieved top priority at 58%, followed by heat release rate at 19%, material strength retention at 18%, and welding efficiency at 5%. Among various biomass-based nanocomposites, Corn starch polymer coating emerged as the best option, exhibiting the minimum centroidal distance of 1.73. The optimized outcomes achieved through this analysis were a welding efficiency of 90%, heat release rate of 12[ ]kJ/s, environmental impact of 0.1[ ]kg CO2e/unit, and material strength retention of 78%. In conclusion, this study highlights the effectiveness of computer modeling and simulation, combined with entropy-based k-means analysis, in evaluating the thermal spraying welding process. The findings provide a solid framework for improving welding efficiency, contributing to advancements in sustainable manufacturing.

  • ASSESSING THE EFFECTIVENESS OF SOFT COMPUTING TECHNIQUES IN DETERMINING OPTIMAL WELDING PARAMETERS FOR REDUCED ENVIRONMENTAL IMPACT IN A COLD METAL TRANSFER WELDING PROCESS — A GREEN WELDING APPROACH

    by Tasleem Ahmad, Pratibha Kumari, Tasmeem Ahmad Khan, Zeinebou Yahya, Aiyeshah Alhodaib, Mohd Parvez, Dhani Ram, Ashok Kumar Yadav, Osama Khan

    The increasing demand for high-quality welds in various industries such as automotive, aerospace, and shipbuilding has led to the need for more efficient welding processes. Cold Metal Transfer (CMT) welding offers several advantages over traditional welding methods. This study investigates the CMT welding process applied to High-Strength Low-Alloy (HSLA) steel plates, focusing on optimizing weld parameters for enhanced joint quality and mechanical performance. The CMT process was selected for its ability to provide low heat input, thereby minimizing thermal distortion, and preserving the mechanical properties of the HSLA material. Key welding parameters, including welding speed (10–30[ ]mm/s), wire feed rate (2–4[ ]m/min), heat input (1.8–2.4[ ]kJ/mm), arc voltage (12–16[ ]V), and gas flow rate (3–5[ ]L/min), were systematically varied to assess their impact on weld integrity and strength. Uncertainty analysis is conducted and came out to be 3.25% which lies in an acceptable range. The AHP–TOPSIS analysis was conducted to identify the most important welding process parameters and equipment for achieving high-quality welds in CMT welding of steel. The results showed that welding speed, wire feed rate, and gas flow rate were the most important process parameters for achieving high-quality welds. In the AHP analysis, Tensile Strength achieved the highest priority (39%) while Impact Toughness (22%) followed it. After prioritizing the variables, an inter-relationship between the most favorable inputs with outputs is established using Artificial Intelligence (AI). Prediction analysis is performed to establish the most optimal welding setting among thousands of input sets. The sample with set 1 was found to be the best choice for producing high-quality welds in CMT welding of steel. The optimal parameter values were found to be a welding speed of 25[ ]mm/s, wire feed rate of 3[ ]m/min, arc voltage of 12[ ]V, gas flow rate of 5[ ]L/min, and heat input of 1.5[ ]kJ/mm yielding a tensile strength of 460[ ]MPa, hardness of 42[ ]HRC, impact toughness of 29 J, radiation of 110[ ]W/m2, convection of 90[ ]W/m2, and conduction of 150[ ]W/m2. This study provides valuable insights into the effective use of CMT for welding HSLA steel, offering practical guidelines for achieving high-quality welds in structural applications.