Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sheng Lu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Graphene-Based Interconnect Exploration for FPGA Design and Optimization Towards the End of the Roadmap

    by Zhenlin Pei, Sheng Lu, Liuting Shang, Sungyong Jung, Qilian Liang, Chenyun Pan

    The emerging graphene interconnect technology is expected to be a promising alternative to traditional interconnect technologies due to its superior conductivity. Because of the dominant impact of global routing on the overall performance of a widely used application, the Field-Programmable Gate Array (FPGA), this work investigates the potential advantage of using graphene-based interconnects to replace conventional copper (Cu) for global routing. Furthermore, a scalability analysis is performed, and the effects of technology node scaling from 7 nm to 1.5 nm are evaluated using lateral gate-all-around field-effect transistors (LGAAFETs) within the proposed system-technology co-design (STCO) framework. Key material-level parameters, including the mean free path (MFP), contact resistance, and the number of graphene layers, are systematically analyzed. Benchmark simulations demonstrate that a 32% improvement in the energy-delay product (EDP) is achieved with graphene-based interconnects compared to Cu counterparts at the 7 nm technology node, and an additional 46% reduction is observed at the 1.5 nm technology node. It is important to note that this work is an exploratory STCO study incorporating cross-layer design considerations, with a focus on long-term trends rather than short-term manufacturability.

  • Open Access

    Variation-Aware Memristor-Based Analog Accelerator for Vision Transformer

    by Qianhou Qu, Sheng Lu, Liuting Shang, Sungyong Jung, Qilian Liang, Chenyun Pan

    Vision transformers (ViTs) have emerged as one of the most popular computer vision models, achieving remarkable performance in image recognition. However, ViTs require large-scale, high-dimensional matrix computations, and traditional digital accelerators, such as graphics processing units (GPUs), have memory bandwidth limitations, leading to higher latency, increased energy consumption, and larger area. To address this challenge, this paper proposes a memristor-based analog accelerator that leverages memristor crossbar arrays for in-memory computing, reducing data movement and improving computational efficiency. Considering the non-ideal characteristics of memristor devices and the influence of analog circuitry, we incorporate Gaussian-distributed analog computation error at each step and memristor non-ideality modeling into the ViT inference to enable realistic evaluation under hardware-level conditions. Experimental evaluation on ImageNet-1k dataset with TIMM-pretrained ViT models shows that the proposed analog accelerator can achieve the same Top-1 accuracy as a custom-designed 5 nm digital baseline accelerator, even with ~35% analog computation error and ~10% memristor conductance variation injected at each step. Compared to the digital counterpart, the proposed design achieves an 11.9× reduction in energy-delay product (EDP) and a 137.2× reduction in energy-delay-area product (EDAP).

  • Open Access

    An Energy-Efficient RFET-Based Stochastic Computing Neural Network Accelerator

    by Sheng Lu, Qainhou Qu, Sungyong Jung, Qilian Liang, Chenyun Pan

    Stochastic computing (SC) offers significant reductions in hardware complexity for traditional convolutional neural networks (CNNs). However, despite its advantages, stochastic computing neural networks (SCNNs) often suffer from high resource consumption due to components such as stochastic number generators (SNGs) and accumulative parallel counters (APCs), which limit overall performance. This paper proposes a novel SCNN architecture leveraging reconfigurable field-effect transistors (RFETs). The inherent reconfigurability at the device level enables the design of highly efficient and compact SNGs, APCs, and other essential components. Furthermore, a dedicated SCNN accelerator architecture is developed to facilitate system-level simulation. Based on accessible open-source standard cell libraries, experimental results demonstrate that the proposed RFET-based SCNN accelerator achieves significant reductions in area, latency, and energy consumption compared to its FinFET-based counterpart at the same technology node.


  • Novel FPGA Technology Mapping for Dual-Output LUTs: Methodology and Application

    by Liuting Shang, Sheng Lu, Sungyong Jung, Qilian Liang, Chenyun Pan

    Dual-output look-up tables (LUTs) are supported by modern commercial field-programmable gate array (FPGA) architectures. Existing technology mapping usually generates multioutput LUTs by merging single-output LUTs. However, these mapping solutions often fail to fully leverage the multioutput capability. This article proposes a novel FPGA mapping scheme for multioutput logic units, aiming to improve synthesis performance significantly. By introducing new metrics functions, k-input l-output cut (kl-cut) generation method, and methods to add secondary LUT outputs, the proposed approach enables thorough exploration of the design space. Results show that the proposed dual-output LUT synthesis method achieves 30.2% and 34.7% reduction in LUT usage and depth, respectively, outperforming leading-edge dual-output mapping tools. In addition, the proposed mapping scheme is applied to an emerging field-programmable unit, MCluster, proving compatibility and efficiency on non-LUT logic blocks. For the first time, we perform a system-level design flow to demonstrate the benefit of multioutput LUT at the system level and provide critical insights and design trade-offs.


  • Open Access

    Technology/System Co-Optimization for FPGA Using Emerging Reconfigurable Logic Device

    by Sheng Lu, Liuting Shang, Sungyong Jung, Yichen Zhang, Qilian Liang, Chenyun Pan

    Reconfigurable devices are gaining increasing attention as a viable alternative and supplementary solution to the traditional CMOS technology. In this article, we develop a more efficient field-programmable gate array (FPGA) based on the reconfigurable field-effective transistor (RFET). We use the multi-gate characteristics of RFET to redesign the key components of FPGAs, namely SRAM-controlled multiplexer and look-up tables. The compact structure of the proposed design requires fewer transistors and leads to reduced delay of the overall FPGA system. In addition, we develop a comprehensive technology/system co-design and co-optimization framework to thoroughly investigate the design space, including various device- and system-level design parameters. A series of benchmark tests show that under the optimal design, up to 32% and 13% reduction can be achieved in delay and energy-delay product (EDP), respectively, compared to the traditional CMOS FPGAs.


  • A Novel RFET-Based FPGA Architecture Based on Delay-Aware Packing Algorithm

    by Sheng Lu, Liuting Shang, Sungyong Jung, Qilian Liang, Chenyun Pan

    Reconfigurable devices are attracting growing interest as both a potential alternative and complement to traditional CMOS technology. This paper develops a novel fieldprogrammable gate array (FPGA) architecture based on MClusters, which is made of fast and area-efficient 2-input lookup tables (LUTs) through reconfigurable field-effect transistors (RFETs). To fully utilize the MClusters, we propose an SAT-based delay-aware packing algorithm for the technology mapping. In addition, we integrate a partitioning algorithm to divide the circuit into several sub-circuits to further reduce the global routing resources and their associated switching energy of the system. Finally, we develop an efficient technology/circuit/system co-design framework for optimizing the overall performance of FPGAs. Based on comprehensive benchmarking, results demonstrate that optimal design yields significant reductions of up to 39% area, 36% wire length, and 40% switching energy compared to traditional CMOS 6-input LUT FPGAs.


  • Open Access

    An Efficient Multi-Output LUT Mapping Technique for Field-Programmable Gate Arrays

    by Sheng Lu, Liuting Shang, Qianhou Qu, Sungyong Jung, Qilian Liang, Chenyun Pan

    The use of multi-output look-up tables (LUTs) is a widely adopted approach in contemporary commercial field-programmable gate arrays (FPGAs). Larger LUT configurations (e.g., six-input LUTs) can be partitioned into smaller LUTs (e.g., two five-input LUTs, maintaining a total input count of less than six). This capability of generating a second output from a larger LUT is not only crucial for reducing logic cell count and enhancing the utilization efficiency of logic resources—thus conserving area—but also plays a key role in optimizing system-level delays and energy consumption. In this paper, we propose an efficient multi-output LUT mapping technique, incorporating several highly efficient technology mapping algorithms, which focus on optimizing the mapping from an interconnection perspective as alternatives to directly merging smaller LUTs. These algorithms include a side-fanout insertion algorithm, and a runtime multi-output cut generation algorithm. The proposed methods improve mapping efficiency and enhance performance. The benchmarking results demonstrate that the dual-output mapping algorithms achieve LUT area reductions of up to 35% and 6%, compared to the state-of-the-art ABC six-input, single-output LUT mapping technique and previous work focusing on dual-output LUT mapping techniques that optimize cut generation parameters. Moreover, FPGA system-level simulations also show that area, delay, and energy can all be optimized based on this multi-output mapping technique.


  • A Novel Delay-Aware Packing Algorithm for FPGA Architecture Using RFET

    by Sheng Lu, Liuting Shang, Sungyong Jung, Yichen Zhang, Chenyun Pan

    Reconfigurable devices are gaining increasing attention as a viable alternative and supplementary solution to traditional CMOS technology. In this paper, we develop a more efficient 2-input look-up table (LUT) based on the reconfigurable field-effect transistors (RFETs), leading to a smaller transistor usage and a smaller critical path delay. The cells are organized into regular matrices, known as MClusters, with a fixed interconnection pattern to replace LUTs in field-programmable gate arrays (FPGAs). To improve the efficiency of utilizing this structure, we design a SAT-based delay-aware packing algorithm to better utilize logical gates for the MCluster structure. Finally, we combine this algorithm with FPGA simulation tools to form a comprehensive benchmarking flow. A series of benchmark tests show that under the optimal design, up to 35% and 30% reduction can be achieved in delay and energy-delay product (EDP), respectively, compared to the traditional CMOS FPGAs.


  • Emerging Reconfigurable Logic Device Based FPGA Design and Optimization

    by Sheng Lu, Liuting Shang, Sungyong Jung, Chenyun Pan

    Reconfigurable devices are gaining increasing attention as a viable alternative and supplementary solution to the prevailing CMOS technology. In this paper, we develop a more efficient Field-Programmable Gate Array (FPGA) based on the reconfigurable field-effective transistor (RFET). We use the multi-gate characteristics of RFET to redesign the key components of FPGAs, namely SRAM-controlled multiplexer (MUX) and look-up tables (LUTs). The compact structure of the proposed design requires fewer transistors and leads to reduced delay and energy dissipation of the overall FPGA system. In addition, we develop a framework to perform a large design space exploration across various device-level and system-level parameters. A series of benchmark tests show that under the optimal design, up to 70% and 50% reduction can be achieved in delay and energy-delay product (EDP), respectively, compared to the traditional CMOS counterparts.