Mishra Pratikshya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mishra Pratikshya has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Lenka Devraj
Department of Plant Breeding & Genetics, Odisha University of Agriculture and Technology, Bhubaneswar 751 003, Odisha, India
4 shared publications - Chandra Pradhan Kartik
Department of Plant Breeding & Genetics, Odisha University of Agriculture and Technology, Bhubaneswar 751 003, Odisha, India
3 shared publications - Kailash Chandra Samal
Department of Molecular Biology and Biotechnology, College of Agriculture, Odisha University of Agriculture and Technology, Bhubaneswar 751 003, Odisha, India
3 shared publications - Mahendra Mohanty
Department of Farm Machinery and Power, Odisha University of Agriculture and Technology, Bhubaneswar 751 003, Odisha, India
3 shared publications - Ranjan Mohanty Mihir
Department of Plant Breeding & Genetics, Odisha University of Agriculture and Technology, Bhubaneswar 751 003, Odisha, India
3 shared publications - Smruti Ranjan Padhan
Division of Agronomy, ICAR - Indian Agricultural Research Institute, New Delhi 110 012, India
3 shared publications
Latest Publications
- Open Access
- 3 December 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Multivariate analysis, trait association and biochemical profiling of finger millet germplasm for identification of potential genotypes for bioethanol production
Finger millet is a climate-resilient, nutrient-rich crop well-suited to marginal environments. Recently, its lignocellulosic biomass has gained attention as a potential feedstock for biofuel production. Despite Odisha being a hotspot for landrace diversity, limited studies have evaluated finger millet germplasm for biofuel-relevant traits using multivariate analysis. The present study characterized 30 finger millet genotypes collected from AICRP on small millets, Berhampur, Odisha, during Kharif 2022. Observations were recorded for 8 morphological traits relevant to biofuel potential. Principal Component Analysis (PCA) and correlation matrix analysis were employed to identify traits contributing most to variability and to group genotypes with superior biofuel-related characteristics. The first three principal components exhibited 76.88 % of the total variation. A statistically significant positive correlation was observed between grain yield per plant and the number of ears per plant at both genotypic (r = 0.916) and phenotypic (r = 0.866) levels, indicating the potential for indirect selection on the basis of ears per plants to enhance yield. Based on mean performances and PCA results, 6 promising genotypes were selected for further biochemical analysis. Estimation of cellulose, hemicellulose and lignin content revealed that genotype G30-GN-2-2 excelled in both grain yield and bioethanol potential, highlighting its suitability for use in future biofuel-oriented breeding programs. This fills a critical research gap by integrating multivariate tools to identify promising dual-purpose finger millet genotypes. The findings support the potential of finger millet as a renewable biofuel resource and offer a strategic framework for breeding programs aimed at enhancing both yield and bioenergy efficiency.
- 3 December 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessMultivariate analysis, trait association and biochemical profiling of finger millet germplasm for identification of potential genotypes for bioethanol production
Finger millet is a climate-resilient, nutrient-rich crop well-suited to marginal environments. Recently, its lignocellulosic biomass has gained attention as a potential feedstock for biofuel production. Despite Odisha being a hotspot for landrace diversity, limited studies have evaluated finger millet germplasm for biofuel-relevant traits using multivariate analysis. The present study characterized 30 finger millet genotypes collected from AICRP on small millets, Berhampur, Odisha, during Kharif 2022. Observations were recorded for 8 morphological traits relevant to biofuel potential. Principal Component Analysis (PCA) and correlation matrix analysis were employed to identify traits contributing most to variability and to group genotypes with superior biofuel-related characteristics. The first three principal components exhibited 76.88 % of the total variation. A statistically significant positive correlation was observed between grain yield per plant and the number of ears per plant at both genotypic (r = 0.916) and phenotypic (r = 0.866) levels, indicating the potential for indirect selection on the basis of ears per plants to enhance yield. Based on mean performances and PCA results, 6 promising genotypes were selected for further biochemical analysis. Estimation of cellulose, hemicellulose and lignin content revealed that genotype G30-GN-2-2 excelled in both grain yield and bioethanol potential, highlighting its suitability for use in future biofuel-oriented breeding programs. This fills a critical research gap by integrating multivariate tools to identify promising dual-purpose finger millet genotypes. The findings support the potential of finger millet as a renewable biofuel resource and offer a strategic framework for breeding programs aimed at enhancing both yield and bioenergy efficiency.
- Open Access
- 25 November 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Phenotypic characterization and genetic diversity studies of finger millet (Eleusine coracana (L.) Gaertn) germplasms
Eleusine coracana (L.) Gaertn, also known as ragi, is one of the most important millet crops, cultivated across many parts of India. It is well known for its climate resilience and drought tolerance capacity. In the recent years, finger millet is gaining popularity due to its nutritional status and as a measure of crop diversification for small and marginalized farmers. This study was undertaken with the objective to identify various traits that could potentially help in yield enhancement directly or indirectly. During the Kharif, 2022 the experiment was undertaken in a randomized block design (RBD) with three replications. Eight significantly important traits like days to 50 % flowering, days to maturity, plant height, ear length, number of fingers per ear, number of ears per plant, test weight and yield per plant were recorded. Higher mean performance across the majority of traits under study was exhibited by genotypes like Mut-4, G30-GN-2-2, VR-849 and VR-822. Correlation analysis showed a strong and positive association between the number of ears per plant and grain yield, indicating that selecting plants withmore ears could potentially increase yield. Path coefficient study showed that the number of ears per plant had the highest direct positive effect on grain yield, followed by the number of days till 50 % flowering. The Mahalanobis D2 analysis, grouped the genotypes into five groups; the maximum genetic divergence was found in clusters IV and V (D2 = 219.92). This suggests a potential opportunity to select parents with diverse genetic backgrounds for future hybridisation attempts. This study provides valuable findings to improve yield potential of finger millet and enhance crop improvement programmes selection of suitable parents.
- 25 November 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessPhenotypic characterization and genetic diversity studies of finger millet (Eleusine coracana (L.) Gaertn) germplasms
Eleusine coracana (L.) Gaertn, also known as ragi, is one of the most important millet crops, cultivated across many parts of India. It is well known for its climate resilience and drought tolerance capacity. In the recent years, finger millet is gaining popularity due to its nutritional status and as a measure of crop diversification for small and marginalized farmers. This study was undertaken with the objective to identify various traits that could potentially help in yield enhancement directly or indirectly. During the Kharif, 2022 the experiment was undertaken in a randomized block design (RBD) with three replications. Eight significantly important traits like days to 50 % flowering, days to maturity, plant height, ear length, number of fingers per ear, number of ears per plant, test weight and yield per plant were recorded. Higher mean performance across the majority of traits under study was exhibited by genotypes like Mut-4, G30-GN-2-2, VR-849 and VR-822. Correlation analysis showed a strong and positive association between the number of ears per plant and grain yield, indicating that selecting plants withmore ears could potentially increase yield. Path coefficient study showed that the number of ears per plant had the highest direct positive effect on grain yield, followed by the number of days till 50 % flowering. The Mahalanobis D2 analysis, grouped the genotypes into five groups; the maximum genetic divergence was found in clusters IV and V (D2 = 219.92). This suggests a potential opportunity to select parents with diverse genetic backgrounds for future hybridisation attempts. This study provides valuable findings to improve yield potential of finger millet and enhance crop improvement programmes selection of suitable parents.
- Open Access
- 1 August 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Combining ability, FTIR spectroscopy and fatty acid profiling of sunflower (Helianthus annuus L.) hybrids
Ten CMS lines and three R lines were crossed using a line × tester mating design to assess the combining ability for yield and component characters in sunflower (Helianthus annuus L.). Fourier Transform Infrared Spectroscopy (FTIR), fatty acid profiling and protein content analysis of thirty developed hybrids and their parents were conducted to identify and estimate the relative amounts of various bioactive compounds in sunflower. The analysis of variance showed significant variation among lines as well as testers for all the traits under study indicating presence of substantial genetic variation. The line CMS-519 was observed as good general combiner for plant height, head diameter, stem diameter, number of leaves/plants, seed yield/plant, biological yield/plant, where as CMS-240 was good general combiner for oil content and volume weight. Among the testers GP4-1424 was identified as a good general combiner for most traits. Among the hybrids, CMS-519 × GP4-1424 exhibited the highest specific combining ability (SCA) for plant height, head diameter, stem diameter, biological yield per plant and seed filling percentage. The cross CMS-207 × RHA-1-1 and CMS-243 × GP4-1424 showed highest SCA for seed yield and oil content respectively. Fatty acid composition analysis revealed that the hybrids were rich in unsaturated fatty acids, particularly oleic and linoleic acids. FTIR analysis confirmed the presence of functional groups such as =C-H, -C-H (CH3), -C-H (CH2), -C=O (ester), -C-O, -(CH2) n-. Crosses such as CMS-240 × IR-6, CMS-243 × GP4-1424, HA-89 × IR-6 and CMS-519 × GP4-1424 were superior in terms of both oil yield and protein content.
- 1 August 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessCombining ability, FTIR spectroscopy and fatty acid profiling of sunflower (Helianthus annuus L.) hybrids
Ten CMS lines and three R lines were crossed using a line × tester mating design to assess the combining ability for yield and component characters in sunflower (Helianthus annuus L.). Fourier Transform Infrared Spectroscopy (FTIR), fatty acid profiling and protein content analysis of thirty developed hybrids and their parents were conducted to identify and estimate the relative amounts of various bioactive compounds in sunflower. The analysis of variance showed significant variation among lines as well as testers for all the traits under study indicating presence of substantial genetic variation. The line CMS-519 was observed as good general combiner for plant height, head diameter, stem diameter, number of leaves/plants, seed yield/plant, biological yield/plant, where as CMS-240 was good general combiner for oil content and volume weight. Among the testers GP4-1424 was identified as a good general combiner for most traits. Among the hybrids, CMS-519 × GP4-1424 exhibited the highest specific combining ability (SCA) for plant height, head diameter, stem diameter, biological yield per plant and seed filling percentage. The cross CMS-207 × RHA-1-1 and CMS-243 × GP4-1424 showed highest SCA for seed yield and oil content respectively. Fatty acid composition analysis revealed that the hybrids were rich in unsaturated fatty acids, particularly oleic and linoleic acids. FTIR analysis confirmed the presence of functional groups such as =C-H, -C-H (CH3), -C-H (CH2), -C=O (ester), -C-O, -(CH2) n-. Crosses such as CMS-240 × IR-6, CMS-243 × GP4-1424, HA-89 × IR-6 and CMS-519 × GP4-1424 were superior in terms of both oil yield and protein content.
- Open Access
- 25 June 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Integrating genetic diversity and biochemical profiling for biofuel-efficient maize genotypes
This study explores the genetic diversity, biochemical composition and trait associations in maize (Zea mays L.) to assess its potential as a dual-purpose crop for food and biofuel production. Significant variations in lignocellulosic traits among the evaluated genotypes indicate opportunities for enhancing bioethanol yields. A comparative biochemical study reveals the cellulose content in the kernel is 2.15 times higher than in stover, whereas the hemicellulose and lignin content in stover are 4.6 times and 5.3 times higher, respectively, compared to the kernel. The inbred lines DQL 2159, DQL 222-1-1 and DQL 2272 exhibited significantly higher cellulose contents of 37.05 %, 35.98 % and 35.53 %, respectively, along with significantly lower lignin contents of 20.65 %, 22.25 % and 22.53 % in maize stover. Correlation analysis shows that shoot dry weight (rp = 0.29), stalk diameter (rp = 0.33) and plant height (rp = 0.48) are positively associated with biomass yield. Biochemical studies reveal a strong negative correlation (rp = -0.59) between kernel lignin and kernel cellulose content, indicating that higher cellulose leads to lower lignin. This finding is valuable for selecting high-cellulose, low-lignin genotypes. Path coefficient analysis further identifies plant height, number of leaves per plant, stalk diameter and kernel cellulose content as key contributors to grain yield, suggesting that selection for these traits could enhance biofuel production. Identifying desirable traits that enhance biofuel efficiency, such as high cellulose and low lignin content, enables targeted breeding for improved biomass conversion. Cluster analysis revealed that Cluster III exhibited superior performance across the majority of traits evaluated, making it the most promising group for utilization in biofuel breeding programs. Notably, genotypes such as DQL 2037, DQL 2272, DQL 2159 and DQL 222-1-1 emerge as promising candidates for biofuel applications due to their high grain and stover yields, alongside elevated cellulose and hemicellulose content. Collectively, these findings provide a comprehensive framework for targeted breeding strategies aimed at developing high-yielding, biofuel-efficient maize cultivars for climate smart agriculture systems.
- 25 June 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessIntegrating genetic diversity and biochemical profiling for biofuel-efficient maize genotypes
This study explores the genetic diversity, biochemical composition and trait associations in maize (Zea mays L.) to assess its potential as a dual-purpose crop for food and biofuel production. Significant variations in lignocellulosic traits among the evaluated genotypes indicate opportunities for enhancing bioethanol yields. A comparative biochemical study reveals the cellulose content in the kernel is 2.15 times higher than in stover, whereas the hemicellulose and lignin content in stover are 4.6 times and 5.3 times higher, respectively, compared to the kernel. The inbred lines DQL 2159, DQL 222-1-1 and DQL 2272 exhibited significantly higher cellulose contents of 37.05 %, 35.98 % and 35.53 %, respectively, along with significantly lower lignin contents of 20.65 %, 22.25 % and 22.53 % in maize stover. Correlation analysis shows that shoot dry weight (rp = 0.29), stalk diameter (rp = 0.33) and plant height (rp = 0.48) are positively associated with biomass yield. Biochemical studies reveal a strong negative correlation (rp = -0.59) between kernel lignin and kernel cellulose content, indicating that higher cellulose leads to lower lignin. This finding is valuable for selecting high-cellulose, low-lignin genotypes. Path coefficient analysis further identifies plant height, number of leaves per plant, stalk diameter and kernel cellulose content as key contributors to grain yield, suggesting that selection for these traits could enhance biofuel production. Identifying desirable traits that enhance biofuel efficiency, such as high cellulose and low lignin content, enables targeted breeding for improved biomass conversion. Cluster analysis revealed that Cluster III exhibited superior performance across the majority of traits evaluated, making it the most promising group for utilization in biofuel breeding programs. Notably, genotypes such as DQL 2037, DQL 2272, DQL 2159 and DQL 222-1-1 emerge as promising candidates for biofuel applications due to their high grain and stover yields, alongside elevated cellulose and hemicellulose content. Collectively, these findings provide a comprehensive framework for targeted breeding strategies aimed at developing high-yielding, biofuel-efficient maize cultivars for climate smart agriculture systems.
- Open Access
- 26 April 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Biochemical profiling of quality protein maize inbred lines for optimized biofuel production
The rising demand for sustainable energy sources has necessitated the exploration of crops with enhanced biofuel production potential. Quality Protein Maize (QPM) offers a promising alternative for biofuel research due to its unique biochemical composition and high biomass yield. This study evaluated QPM inbred lines for biofuel potential through morpho-biochemical analysis. Key morphological traits, including plant height, leaf area, stalk diameter and grain yield, were assessed. Biochemical profiling measured cellulose, hemicellulose and lignin content in stover and kernels. Initial screening identified 30 high-performing lines for further biochemical evaluation. The lignocellulosic stover biomass exhibited cellulose content ranging from 28.05 % to 37.05 %, hemicellulose from 7.06 % to 15.81 % and lignin from 20.65 % to 28.35 %. In contrast, biochemical profiling of the kernel revealed significantly higher cellulose content (65.36 % to 75.02 %), lower hemicellulose levels (1.09 % to 4.45 %) and lignin content ranging from 3.56 % to 6.07 %. Inbred lines DQL 2037 and DQL 222-1-1 exhibited significantly (p=0.05) superior mean performance for biofuel-related morphological traits. Inbred lines DQL 2159, DQL 222-1-1 and DQL 2272 exhibited significantly higher cellulose of 37.05, 35.98 and 35.53 %, respectively along with a significantly lower lignin content of 20.65, 22.25 and 22.53 % respectively in maize stover. Principal Component Analysis (PCA) and correlation matrix techniques were employed to identify key traits contributing to variability and to cluster genotypes with superior biofuel-related traits. The identification of high-performing inbred lines with favourable lignocellulosic profiles provides a strong foundation for breeding programs focused on developing maize genotypes tailored for biofuel production. This study highlights the potential of QPM inbred lines as a renewable resource for biofuel production and provides a framework for breeding strategies aimed at enhancing biofuel efficiency.
- 26 April 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessBiochemical profiling of quality protein maize inbred lines for optimized biofuel production
The rising demand for sustainable energy sources has necessitated the exploration of crops with enhanced biofuel production potential. Quality Protein Maize (QPM) offers a promising alternative for biofuel research due to its unique biochemical composition and high biomass yield. This study evaluated QPM inbred lines for biofuel potential through morpho-biochemical analysis. Key morphological traits, including plant height, leaf area, stalk diameter and grain yield, were assessed. Biochemical profiling measured cellulose, hemicellulose and lignin content in stover and kernels. Initial screening identified 30 high-performing lines for further biochemical evaluation. The lignocellulosic stover biomass exhibited cellulose content ranging from 28.05 % to 37.05 %, hemicellulose from 7.06 % to 15.81 % and lignin from 20.65 % to 28.35 %. In contrast, biochemical profiling of the kernel revealed significantly higher cellulose content (65.36 % to 75.02 %), lower hemicellulose levels (1.09 % to 4.45 %) and lignin content ranging from 3.56 % to 6.07 %. Inbred lines DQL 2037 and DQL 222-1-1 exhibited significantly (p=0.05) superior mean performance for biofuel-related morphological traits. Inbred lines DQL 2159, DQL 222-1-1 and DQL 2272 exhibited significantly higher cellulose of 37.05, 35.98 and 35.53 %, respectively along with a significantly lower lignin content of 20.65, 22.25 and 22.53 % respectively in maize stover. Principal Component Analysis (PCA) and correlation matrix techniques were employed to identify key traits contributing to variability and to cluster genotypes with superior biofuel-related traits. The identification of high-performing inbred lines with favourable lignocellulosic profiles provides a strong foundation for breeding programs focused on developing maize genotypes tailored for biofuel production. This study highlights the potential of QPM inbred lines as a renewable resource for biofuel production and provides a framework for breeding strategies aimed at enhancing biofuel efficiency.