Huina Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huina Xie has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jie Li
College of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
3 shared publications - Jing Li
College of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
3 shared publications - Wei Zhao
College of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
3 shared publications - Hao Mu
College of Environmental and Municipal Engineering, Xi’an University of Architecture and Technology, Xi’an 710000, China
2 shared publications Jie Li
School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, PR China
2 shared publicationsJing Li
School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou 730070, PR China
2 shared publications
Latest Publications
- 26 June 2026
- Published by Elsevier in Bioresource Technology
- Vol. 459, 135247
Synergistic chemo-biological degradation of ciprofloxacin: Role of sponge iron-driven in-situ fenton-like reaction and microbial community evolution
- 26 June 2026
- Published by Elsevier in Bioresource Technology
- Vol. 459, 135247
Synergistic chemo-biological degradation of ciprofloxacin: Role of sponge iron-driven in-situ fenton-like reaction and microbial community evolution
- 3 November 2025
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 49 (2) , 337-350
Microbial functional characteristics in a full-scale immobilized biochemical tank: focusing on the suspended sludge and carrier-attached biofilm
Although microbial immobilization has been widely applied in wastewater treatment, the functional differences between suspended sludge and carrier-attached biofilms remain poorly understood. In this study, we investigated the microbial community structure and potential metabolic differences between suspended sludge (MIS) and polyurethane foam (PUF)-attached biofilms (MIC) in an immobilized biochemical tank (MI) from a chemical fiber plant. Compared to the conventional activated sludge process (CAS), the MI demonstrated significantly enhanced removal efficiencies of 39.4% for COD and 83.3% for BOD. The richness, diversity and unique microorganisms of MIS were higher than those of MIC. The dominant genera in MIS were Aridibacter, Diaphorobacter, Nostocoida, Pirellulaceae, Mucilaginibacter, and Rhodanobacter, while the dominant genera in MIC were Mucilaginibacter, Aridibacter, Nostocoida, Gemmata, Meiothermus, and Mycobacterium. Although the major genera were consistent, their relative abundance varied. Metabolic pathway analysis indicated that MIS showed stronger contributions to the transport of organic pollutants, while their role in nitrogen removal in the wastewater was greater than that of attached microorganisms. In contrast, carbon removal primarily occurred on the MIC. Moreover, the intensity of stochastic processes in shaping bacterial communities was observed as CAS (R² = 0.427) > MIS (R² = 0.261) > MIC (R² = 0.26), suggesting that the carriers enhanced the exposure of microbial communities to deterministic processes. These findings offer concrete theoretical support for the engineering application of microbial immobilization technology in treating industrial wastewater by elucidating key mechanistic insights. Graphical abstract
- 3 November 2025
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 49 (2) , 337-350
Microbial functional characteristics in a full-scale immobilized biochemical tank: focusing on the suspended sludge and carrier-attached biofilm
Although microbial immobilization has been widely applied in wastewater treatment, the functional differences between suspended sludge and carrier-attached biofilms remain poorly understood. In this study, we investigated the microbial community structure and potential metabolic differences between suspended sludge (MIS) and polyurethane foam (PUF)-attached biofilms (MIC) in an immobilized biochemical tank (MI) from a chemical fiber plant. Compared to the conventional activated sludge process (CAS), the MI demonstrated significantly enhanced removal efficiencies of 39.4% for COD and 83.3% for BOD. The richness, diversity and unique microorganisms of MIS were higher than those of MIC. The dominant genera in MIS were Aridibacter, Diaphorobacter, Nostocoida, Pirellulaceae, Mucilaginibacter, and Rhodanobacter, while the dominant genera in MIC were Mucilaginibacter, Aridibacter, Nostocoida, Gemmata, Meiothermus, and Mycobacterium. Although the major genera were consistent, their relative abundance varied. Metabolic pathway analysis indicated that MIS showed stronger contributions to the transport of organic pollutants, while their role in nitrogen removal in the wastewater was greater than that of attached microorganisms. In contrast, carbon removal primarily occurred on the MIC. Moreover, the intensity of stochastic processes in shaping bacterial communities was observed as CAS (R² = 0.427) > MIS (R² = 0.261) > MIC (R² = 0.26), suggesting that the carriers enhanced the exposure of microbial communities to deterministic processes. These findings offer concrete theoretical support for the engineering application of microbial immobilization technology in treating industrial wastewater by elucidating key mechanistic insights. Graphical abstract
- Open Access
- 27 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7244
Evolution of Microbial Community Structure and Denitrifying Functional Microorganisms in the Biological Sponge Iron System
With the growing problem of global water pollution, nitrogen pollution has become a key factor affecting aquatic ecosystems and human health. The biological sponge iron system (BSIS) has gained attention as a research hotspot due to its efficient denitrification capability. This study focused on the changes in microbial community structure and the relative abundance and interrelationships of nitrogen cycle-related functional bacteria at different operational stages of the BSIS with a sponge iron (SFe) dosage of 90 g/L. The results showed that as the operation time of the reactor extended, the relative abundance of denitrifying genera such as Saccharimonadales, Arenimonas, and Acinetobacter significantly increased, while the relative abundance of Proteobacteria showed a trend of initial increase followed by a decrease. The relative abundance of nitrifying bacteria exhibited a more complex variation, whereas the abundance of denitrifying bacteria showed a continuous upward trend. In addition, there were complex interrelationships among different denitrifying bacteria, such as a positive correlation between Saccharimonadales and Acetobacteraceae, and a negative correlation between Rhodothermus and Pseudoxanthomonas. This study not only revealed the changes in the relative abundance and interrelationships of microbial communities and nitrogen cycle-related functional bacteria over time with an SFe dosage of 90 g/L, but also provided a new perspective for understanding the intrinsic mechanism of enhanced biological denitrification by sponge iron. These findings are of great significance for optimizing the operating parameters of the BSIS, improving denitrification efficiency, and promoting the practical application of this technology in the field of environmental engineering.
- 27 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7244
Open AccessEvolution of Microbial Community Structure and Denitrifying Functional Microorganisms in the Biological Sponge Iron System
With the growing problem of global water pollution, nitrogen pollution has become a key factor affecting aquatic ecosystems and human health. The biological sponge iron system (BSIS) has gained attention as a research hotspot due to its efficient denitrification capability. This study focused on the changes in microbial community structure and the relative abundance and interrelationships of nitrogen cycle-related functional bacteria at different operational stages of the BSIS with a sponge iron (SFe) dosage of 90 g/L. The results showed that as the operation time of the reactor extended, the relative abundance of denitrifying genera such as Saccharimonadales, Arenimonas, and Acinetobacter significantly increased, while the relative abundance of Proteobacteria showed a trend of initial increase followed by a decrease. The relative abundance of nitrifying bacteria exhibited a more complex variation, whereas the abundance of denitrifying bacteria showed a continuous upward trend. In addition, there were complex interrelationships among different denitrifying bacteria, such as a positive correlation between Saccharimonadales and Acetobacteraceae, and a negative correlation between Rhodothermus and Pseudoxanthomonas. This study not only revealed the changes in the relative abundance and interrelationships of microbial communities and nitrogen cycle-related functional bacteria over time with an SFe dosage of 90 g/L, but also provided a new perspective for understanding the intrinsic mechanism of enhanced biological denitrification by sponge iron. These findings are of great significance for optimizing the operating parameters of the BSIS, improving denitrification efficiency, and promoting the practical application of this technology in the field of environmental engineering.
- Open Access
Immobilization Technology of Aerobic Denitrifying Bacteria and Its Enhanced Biological Denitrification: A Review of Recent Advances
Aerobic denitrifying microorganisms, with their strong environmental adaptability, low dissolved oxygen concentration requirements, rapid growth rate, and high nitrogen removal efficiency, significantly compensate for the shortcomings of traditional aerobic chemolithoautotrophic nitrification and anaerobic heterotrophic denitrification models. The introduction of aerobic denitrifiers can effectively enhance the removal of nitrate nitrogen. However, directly inoculating aerobic denitrifiers into wastewater leads to issues such as easy loss of bacterial cells and difficulty in forming a dominant flora, thus preventing the long-term maintenance of their enhancing effect on denitrification performance. To address this problem, microbial immobilization technology has been introduced into the remediation process of nitrogen-polluted water bodies. This technology can maintain a high biomass concentration, provide a stable breeding ground for microorganisms, and effectively prevent the rapid loss of microorganisms. This article systematically reviews the current status of the isolation of aerobic denitrifying bacteria, key enzymes, and genes, as well as the application progress of aerobic denitrifying bacteria and their immobilization technology, aiming to provide solid theoretical support for the practical application of aerobic denitrification technology and promote its further development in the field of nitrogen pollution control.
Open AccessImmobilization Technology of Aerobic Denitrifying Bacteria and Its Enhanced Biological Denitrification: A Review of Recent Advances
Aerobic denitrifying microorganisms, with their strong environmental adaptability, low dissolved oxygen concentration requirements, rapid growth rate, and high nitrogen removal efficiency, significantly compensate for the shortcomings of traditional aerobic chemolithoautotrophic nitrification and anaerobic heterotrophic denitrification models. The introduction of aerobic denitrifiers can effectively enhance the removal of nitrate nitrogen. However, directly inoculating aerobic denitrifiers into wastewater leads to issues such as easy loss of bacterial cells and difficulty in forming a dominant flora, thus preventing the long-term maintenance of their enhancing effect on denitrification performance. To address this problem, microbial immobilization technology has been introduced into the remediation process of nitrogen-polluted water bodies. This technology can maintain a high biomass concentration, provide a stable breeding ground for microorganisms, and effectively prevent the rapid loss of microorganisms. This article systematically reviews the current status of the isolation of aerobic denitrifying bacteria, key enzymes, and genes, as well as the application progress of aerobic denitrifying bacteria and their immobilization technology, aiming to provide solid theoretical support for the practical application of aerobic denitrification technology and promote its further development in the field of nitrogen pollution control.
- Open Access
Optimizing the Nitrogen Removal Efficiency of an Intermittent Biological Sponge Iron Reactor by Immobilizing Aerobic Denitrifying Bacteria in the Biological Sponge Iron System
This study investigates the enhancement of nitrogen removal performance in an intermittent biological sponge iron system (BSIS) through the immobilization of aerobic denitrifying bacteria. The aim is to improve the efficiency of simultaneous nitrification and denitrification (SND) in the BSIS by optimizing the microbial community involved in nitrogen conversion. The immobilization technique not only stabilizes the microbial activity and abundance of aerobic denitrifying bacteria, but also promotes a more efficient denitrification process. The optimal material ratio of polyvinyl alcohol–sodium alginate gel beads was determined as 10 g/100 mL PVA, 4 g/100 mL SA, 2 g/100 mL CaCl2, and 2 g/100 mL of bacterial suspension, achieving a maximum NO3−-N removal rate of 91.73%. A response surface model (RSM), established for the operational conditions, (shaker speed, temperature, and pH) showed a high fitting degree (R2 = 0.9960) and predicted the optimal conditions for maximum NO3−-N removal as 109.24 rpm, 23.6 °C, and pH 7.9. Compared to R1 (47.82%), R3 achieved a higher average total nitrogen (TN) removal rate of 95.49%, following the addition of immobilized aerobic denitrifying bacteria to the BSIS.
Open AccessOptimizing the Nitrogen Removal Efficiency of an Intermittent Biological Sponge Iron Reactor by Immobilizing Aerobic Denitrifying Bacteria in the Biological Sponge Iron System
This study investigates the enhancement of nitrogen removal performance in an intermittent biological sponge iron system (BSIS) through the immobilization of aerobic denitrifying bacteria. The aim is to improve the efficiency of simultaneous nitrification and denitrification (SND) in the BSIS by optimizing the microbial community involved in nitrogen conversion. The immobilization technique not only stabilizes the microbial activity and abundance of aerobic denitrifying bacteria, but also promotes a more efficient denitrification process. The optimal material ratio of polyvinyl alcohol–sodium alginate gel beads was determined as 10 g/100 mL PVA, 4 g/100 mL SA, 2 g/100 mL CaCl2, and 2 g/100 mL of bacterial suspension, achieving a maximum NO3−-N removal rate of 91.73%. A response surface model (RSM), established for the operational conditions, (shaker speed, temperature, and pH) showed a high fitting degree (R2 = 0.9960) and predicted the optimal conditions for maximum NO3−-N removal as 109.24 rpm, 23.6 °C, and pH 7.9. Compared to R1 (47.82%), R3 achieved a higher average total nitrogen (TN) removal rate of 95.49%, following the addition of immobilized aerobic denitrifying bacteria to the BSIS.