EHErti Hamimi

Erti Hamimi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Erti Hamimi has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bibliometric Trends of Science, Technology, Engineering, Mathematic Integration and Science Process Skills Development through Sustainable Seed Paper for SDGs

    by Nensy Eka Selviana, Endang Susantini, Lidya Vriska Fatimah Azzahra, Muhammad Zahrudin Afnan, Rinaldiyanti Rukmana, Erti Hamimi

    This research examines the incorporation of scientific process skills within science, technology, engineering, and mathematic (STEM) education, focusing particularly on sustainability and the insufficient alignment among teaching methodologies, skill enhancement, and eco-friendly educational resources. A mixed-methods approach was utilized, integrating bibliometric analysis with a systematic literature review to uncover publication trends, key themes, and research deficiencies in STEM education, scientific process skills, and sustainability. Data were collected from the Scopus database using the search terms "science process skills" and "STEM" for publications spanning from 2005 to 2025. Out of an initial pool of 1.250 documents, 101 articles fulfilled the inclusion criteria, with 13 highly pertinent studies analyzed in detail. The bibliometric results indicate that STEM research primarily focuses on instructional methods and pedagogical approaches, while relatively little emphasis is placed on the creation of practical, sustainability-focused educational media. Qualitative analysis further suggests that eco-friendly learning materials are still underused in STEM education, despite their capacity to improve project-based and authentic learning experiences. Consequently, this study advocates for the adoption of seed paper as a novel and sustainable teaching medium to enhance scientific process skills. The results underscore considerable prospects for promoting sustainable STEM education that aligns with 21st-century competencies and the fulfillment of SDG 4 and SDG 12

  • Open Access

    The Influence of Design Thinking Learning with STEM Approach on Problem Solving Skills in Motion and Force Topics

    by Lintang Fatihatur Roisah, Erti Hamimi, Erni Yulianti, Indra Fardhani, Yayuk Mulyati

    Problem-solving is a crucial 21 st century skill that enables students to make informed decisions and apply knowledge in real-world contexts. To support this need, innovative learning models are required that integrate critical thinking and real-world application. This study investigates the effectiveness of a Design Thinking learning model combined with a STEM (Science, Technology, Engineering, and Mathematics) approach in improving students’ problem-solving skills. The study involved 64 seventh-grade students from a public junior high school in Malang, Indonesia. Two classes were selected using purposive sampling: one as the experimental class, taught using the Design Thinking-STEM model, and the other as the control class with conventional instruction. A problem-solving test instrument, validated by experts, was used as the primary tool to assess students’ abilities. The research employed a quantitative approach with a non-equivalent control group design. Data were analyzed using an independent samples t-test and normalized gain (n-gain). The findings showed a statistically significant difference between the two groups, with the experimental group demonstrating a higher n-gain score (0.58) than the control group (0.31). Indicator-wise analysis revealed that understanding the problem was the most improved aspect, while evaluation remained the lowest. These results suggest that the integration of Design Thinking and STEM effectively enhances students’ problem-solving skills and promotes deeper learning through active engagement.


  • Open Access

    Development of SETS-Based Booklet-Assisted Student Worksheet on Environmental Pollution Material to Improve Science Process Skills

    by Farida Nur Azizah Fitrianasari, Dian Nugraheni, Erti Hamimi, Indra Fardhani, Safwatun Nida

    Understanding science process skills must be supported by learning methods and media that empower students to engage in active learning. SET-based learning model combines science knowledge with real-life experiences and can encourage students to be actively involved in it. This study aims to develop student worksheets assisted by booklets that are feasible, valid, effective, and get a good response if used in learning, and can improve students' science process skills. The research method used is research and development (RD) with the ADDIE development model. The media effectiveness test was carried out with a pre-experimental type one group pretest-posttest design. The research sample used included expert lecturer validators, teachers, and seventh and eighth-grade students. The results of the validation test, as assessed by media experts, were 100%, and those of material experts were 92.8%. The media developed has received an average response of very good based on the assessment of 80.8% teachers and 93% students it is supported to be applied in learning. The media effectiveness test obtained the results of the calculation of the N-Gain value of 0.69, with a moderate category, and a percentage of 69.3% is considered quite effective in improving students' science process skills. So it can be concluded that the results of the development of student worksheet learning media assisted by booklets have been assessed as feasible, valid, received a good response, and are quite effective in improving students' science process skills.

  • Open Access

    Development of STEM-Oriented E-Module Integrated EDP Pattern SSI on Excretory System Material to Train Creative Thinking Skills of Junior High School

    by Sabillatush Oktaviani, Erti Hamimi

    The rapid development of the times in the 21st century is characterized by technological advances with increasingly complex problems so that creative thinking skills are needed by students. E-modules with STEM approach in EDP pattern collaborated with SSI can train students' creative thinking skills. The purpose of this research is to produce a valid and practical e-module with STEM approach of EDP pattern integrated with SSI and to test its effectiveness in encouragingstudents' creative thinking skills on excretory system material. The development was carried out with the ADDIE model consisting of 5 stages, namely analysis, design, development, implementation, and evaluation. Qualitative data was obtainedthrough interviews with teachers, suggestions, and comments on the questionnaire. Quantitative data were obtained from the scores of validators, teachers, students, pretest and posttest. Data analysis used validity and reliability tests, normality tests,homogeneity tests, t-tests, and N-Gain tests. The results of the media and material validation test were 94.67% and 96.45%, respectively. The results of teacher and student practicality tests were 91.67% and 93.03%, respectively. The N-Gain test results showed a comparison of the effectiveness of low criteria in the control class and medium in the experimental class. It can be concluded that the developed e-module is valid, practical, and effective to train creative thinking skills.

  • Open Access

    Development of Project Based Learning STEAM based Water Purifier Educational Kit on Water Pollution to Train Critical Thinking Skills

    by Shinta Permata Sari, Dian Nugraheni, Erti Hamimi, Novida Pratiwi, Habiddin Habiddin

    Critical thinking skills are one of the skills needed in the 21st century. In one of the junior high schools in Pasuruan, students' critical thinking skills are low, so they still need improvement. The goal of this research was the creation of a learning media for an educational kit based on PjBLSTEAM that is considered worthy of being tested for its validity, practicality, and effectiveness in training junior high school students' critical thinking skills on water pollution material. The development procedure was based on the ADDIE model (analyze, design, develop, implement, and evaluate) with data collection techniques using interviews, questionnaires, and pretest-posttest questions. Data analysis techniques were applied using qualitative descriptive techniques, percentage analysis, validity tests, practicality, and effectiveness tests from the paired sample Ttest and N-Gain tests. The results of the media and material validation tests were shown to meet very valid criteria. The results from the teachers and students' feedback showed a very practical percentage. The media was considered effective, as evidenced by the results of the paired sample t-test, which indicated a difference in students' critical thinking scores before and after treatment, and the N-Gain test results, which showed a medium bar value. This research indicates that the learning media developed was valid, practical, and effective for training students' critical thinking skills


  • Open Access

    DEVELOPMENT OF PBL-BASED LKPD ON HUMAN DIGESTIVE SYSTEM MATERIAL FOR GRADE VIII JUNIOR HIGH SCHOOL

    by Risnada Adelia Andini, Indra Fardhani, Erti Hamimi

    This study aims to develop Problem-Based Learning (PBL) based learning media LKPD for the Digestive System material for Grade VIII Junior High School, and to test the validity and practicality of the product. The development of PBL-based LKPD is expected to assist educators in the learning process. This research is a development research (R&D) using the ADDIE model. The research instruments used are expert validation questionnaires for media experts and material experts, practitioner validation questionnaires given to junior high school science teachers (n = 4), and readability test questionnaires given to 4 classes of Grade VIII Junior High School students (n = 108). This study uses descriptive quantitative analysis for data analysis. Based on the data obtained, the media validation results are 95.24%, material validation results are 87.78%, practicality validation results are 90.16%, and an average score of 84.46% was obtained in the readability test. Thus, the PBL-based LKPD on the digestive system material falls into the category of being very valid and very practical for facilitating learning in education.

  • Open Access

    Innovation in Merdeka Curriculum E-Module: Integrating Scientific Approach with Socio-Scientific Issues to Improve Students' Critical Thinking

    by Amelia Rohali, Erti Hamimi

    The critical thinking skills of students in Indonesia remain below average, presenting a significant challenge in preparing students to meet the demands of the 21st century. This study aims to develop an independent curriculum e-module integrating the scientific approach with Socio-Scientific Issues (SSI) to enhance critical thinking skills. The development process employs the ADDIE model, encompassing five stages: Analysis, Design, Development, Implementation, and Evaluation. The study involved seventh-grade students studying biodiversity. Qualitative data were collected through teacher interviews and questionnaires, while quantitative data were obtained from validator scores, teacher and student evaluations, as well as pre-test and post-test results. Data analysis included qualitative descriptive techniques, percentage analysis, validity and reliability tests, normality tests, homogeneity tests, t-tests, and N-Gain tests. The validation results for media and materials reached 93.75% and 98.21%, respectively. Practicality assessments by teachers and students achieved 95.97% and 87.44%, respectively. The N-Gain test demonstrated moderate improvements across five critical thinking indicators. It can be concluded that the e-module is valid, practical, and effective for use in teaching and learning.


  • Open Access

    Development of PBL-Based GLOWASEA (Global Warming on the Sea) Educational Media to Train Critical Thinking Skills on the Topic of Global Warming

    by Farikhatul Mutma’innah, Erti Hamimi

    The low critical thinking skills of Indonesian students in the 21st century indicate the necessity of training these skills to prepare for a future replete with challenges. Teachers need to innovate learning materials that foster critical thinking skills. This study aims to develop a PBL-based GLOWASEA Edukit media product that is valid, effective, and practical for enhancing students’ critical thinking skills. This developmental research was conducted following the ADDIE model, which comprises five stages: analysis, design, development, implementation, and evaluation. Qualitative data were obtained through comments and suggestions for improvement in questionnaires and interviews. Quantitative data were obtained from the scores on the validation test, practicality test, questions’ validity and reliability test, and pretest and post-test score data. Data were analyzed using percentage analysis and qualitative description. Successively, the results of media and material validation and practicality were 82.61%, 91.17%, and 90.62%. The effectiveness of Edukit media is calculated using the N-Gain formula, resulting in an average score of 0.33, which meets moderate criteria. It can be concluded that the GLOWASEA Edukit media produced is valid, effective, and practical for training students’ critical thinking skills.


  • Open Access

    Development of STEM-Based Learning Media FDS (Fire Detector System) Integrated with Blynk IoT to Improve Students' Creativity on Temperature Material

    by Erti Hamimi, Dian Nugraheni, Syahrul Candra Ardani, Isnanik Juni Fitriyah, Ikliil Zhaafirahdiningko, Indra Fardhani, Muhammad Fajar Marsuki

    The Society 5.0 era emphasizes the use of technology and innovation to address social challenges, such as the utilization of Internet of Things (IoT) technology. Creative thinking plays a vital role in generating new ideas and approaches to problem-solving. Science, technology, engineering, and mathematics (STEM)-based education can help individuals develop creative thinking skills by engaging in problem-solving and creating innovative solutions. This study aims to enhance the creative thinking abilities of junior high school students on the topic of temperature through the development of STEM-based instructional media. This is achieved by creating the fire detector system (FDS) educational kit and testing its validity and practicality in the learning process. The study model used in this study is the analysis, design, development, implementation, and evaluation (ADDIE) model. The ADDIE model consists of five stages: analysis, design, development, implementation, and evaluation. The research instruments utilized include structured questionnaires for expert validation and application testing. The participants involved in this study include several seventh-grade students and one science teacher from a junior high school. The collected data is then analyzed using qualitative and quantitative descriptive data analysis techniques. By utilizing the FDS educational kit, it is hoped that it can effectively foster creative thinking skills among junior high school students.


  • Open Access

    Enhancing Critical Thinking Skills through The Development of Educational Kit Based on Problem Based Learning on Conservation Material

    by Erti Hamimi, Fanny Putri Danissa, Yessi Affriyenni

    Enhancing Critical Thinking Skills through The Development of Educational Kit Based on Problem Based Learning on Conservation Material