Kuanysh Makashev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kuanysh Makashev has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- A. K. Zhumabaev1 shared publication
- Aliya Altynbekova
L.N. Gumilyov Eurasian National University
1 shared publication - Andrey Yu. Stolboushkin
Siberian State Industrial University
1 shared publication - Denis Tsygulyov
L.N. Gumilyov Eurasian National University
1 shared publication - Dinara Orazova
Toraighyrov University
1 shared publication - K. T. Sakanov1 shared publication
Latest Publications
- 30 September 2025
- Published byΒ Toraighyrov UniversityΒ inΒ Science and Technology of Kazakhstan
- No.Β 3,2025,p. 408-418
Π’ΡΠ΅ΡΠΈΠ½ΠΎΡΡΠΎΠΉΠΊΠΎΡΡΡ ΠΈ Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠ²Π½ΠΎΡΡΡ Π±Π°Π»ΠΎΠΊ ΠΈΠ· ΡΡΠΆΠ΅Π»ΠΎΠ³ΠΎ Π±Π΅ΡΠΎΠ½Π° ΠΈ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π°
Π Π΄Π°Π½Π½ΠΎΠΉ ΡΠ°Π±ΠΎΡΠ΅ ΠΈΡΡΠ»Π΅Π΄ΡΠ΅ΡΡΡ ΠΏΡΠΎΠ΅ΠΊΡΠΈΡΠΎΠ²Π°Π½ΠΈΠ΅ ΠΆΠ΅Π»Π΅Π·ΠΎΠ±Π΅ΡΠΎΠ½Π½ΡΡ ΠΈ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π½ΡΡ Π±Π°Π»ΠΎΠΊ Ρ Π°ΠΊΡΠ΅Π½ΡΠΎΠΌ Π½Π° ΠΈΡ Π°ΡΠΌΠΈΡΠΎΠ²Π°Π½ΠΈΠ΅, Π½Π΅ΡΡΡΡΡ ΡΠΏΠΎΡΠΎΠ±Π½ΠΎΡΡΡ, Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠΎΠ½Π½ΡΠ΅ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊΠΈ ΠΈ ΡΠΊΠΎΠ½ΠΎΠΌΠΈΡΠ΅ΡΠΊΡΡ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΠΎΡΡΡ. Π Π°ΡΡΠΌΠΎΡΡΠ΅Π½Ρ ΡΡΠΈ Π²ΠΎΠ·ΠΌΠΎΠΆΠ½ΡΡ Π²Π°ΡΠΈΠ°Π½ΡΠ° Π°ΡΠΌΠΈΡΠΎΠ²Π°Π½ΠΈΡ ΠΆΠ΅Π»Π΅Π·ΠΎΠ±Π΅ΡΠΎΠ½Π½ΠΎΠΉ Π±Π°Π»ΠΊΠΈ Ρ ΡΡΠ΅ΡΠΎΠΌ ΡΡΠ΅Π±ΡΠ΅ΠΌΠΎΠΉ ΠΏΠ»ΠΎΡΠ°Π΄ΠΈ ΡΠ°Π±ΠΎΡΠ΅ΠΉ Π°ΡΠΌΠ°ΡΡΡΡ ΠΈ ΠΊΠΎΠ½ΡΡΡΡΠΊΡΠΈΠ²Π½ΡΡ ΠΎΡΠΎΠ±Π΅Π½Π½ΠΎΡΡΠ΅ΠΉ: ΠΈΡΠΏΠΎΠ»ΡΠ·ΠΎΠ²Π°Π½ΠΈΠ΅ 2 ΡΡΠ΅ΡΠΆΠ½Π΅ΠΉ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 28 ΠΌΠΌ., 3 ΡΡΠ΅ΡΠΆΠ½Π΅ΠΉ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 25 ΠΌΠΌ. ΠΈ 4 ΡΡΠ΅ΡΠΆΠ½Π΅ΠΉ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 20 ΠΌΠΌ. ΠΠ½Π°Π»ΠΈΠ· ΠΏΠΎΠΊΠ°Π·Π°Π», ΡΡΠΎ Π½Π°ΠΈΠ±ΠΎΠ»Π΅Π΅ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΡΠΌΠΈ Ρ ΡΠΎΡΠΊΠΈ Π·ΡΠ΅Π½ΠΈΡ Π½Π΅ΡΡΡΠ΅ΠΉ ΡΠΏΠΎΡΠΎΠ±Π½ΠΎΡΡΠΈ ΠΈ ΡΠΊΠΎΠ½ΠΎΠΌΠΈΠΈ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»Π° ΡΠ²Π»ΡΡΡΡΡ Π²Π°ΡΠΈΠ°Π½ΡΡ Ρ 2 ΡΡΠ΅ΡΠΆΠ½ΡΠΌΠΈ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 28 ΠΌΠΌ. ΠΈ 4 ΡΡΠ΅ΡΠΆΠ½ΡΠΌΠΈ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 20 ΠΌΠΌ., ΠΏΡΠΈ ΡΡΠΎΠΌ Π²Π°ΡΠΈΠ°Π½Ρ Ρ 3 ΡΡΠ΅ΡΠΆΠ½ΡΠΌΠΈ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 25 ΠΌΠΌ. Π½Π΅ ΠΎΠΏΡΠ°Π²Π΄ΡΠ²Π°Π΅Ρ ΠΏΠ΅ΡΠ΅ΡΠ°ΡΡ ΠΎΠ΄ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»Π°. Π ΡΠ»ΡΡΠ°Π΅ ΠΏΡΠΈΠΌΠ΅Π½Π΅Π½ΠΈΡ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π° ΠΊΠ»Π°ΡΡΠ° B25 Π±ΡΠ»ΠΎ ΠΏΡΠΎΠ΄Π΅ΠΌΠΎΠ½ΡΡΡΠΈΡΠΎΠ²Π°Π½ΠΎ ΡΠ½ΠΈΠΆΠ΅Π½ΠΈΠ΅ ΡΠ°ΡΡ ΠΎΠ΄Π° Π°ΡΠΌΠ°ΡΡΡΡ Π½Π° 15% ΠΏΡΠΈ ΡΠΎΡ ΡΠ°Π½Π΅Π½ΠΈΠΈ Π½Π΅ΡΡΡΠ΅ΠΉ ΡΠΏΠΎΡΠΎΠ±Π½ΠΎΡΡΠΈ ΠΈ ΡΠ»ΡΡΡΠ΅Π½ΠΈΠΈ Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠΎΠ½Π½ΡΡ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊ, ΡΡΠΎ Π²ΡΡΠ°ΠΆΠ°Π΅ΡΡΡ Π² ΡΠΌΠ΅Π½ΡΡΠ΅Π½ΠΈΠΈ ΠΏΡΠΎΠ³ΠΈΠ±Π° Π½Π° 14%. ΠΡΠΈΠΌΠ΅Π½Π΅Π½ΠΈΠ΅ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π° ΠΏΠΎΠ·Π²ΠΎΠ»ΠΈΠ»ΠΎ ΡΠ°ΠΊΠΆΠ΅ ΡΠ½ΠΈΠ·ΠΈΡΡ ΡΡΡΠ΄ΠΎΠ·Π°ΡΡΠ°ΡΡ Π½Π° 25-30% ΠΈ ΡΠΎΠΊΡΠ°ΡΠΈΡΡ ΡΡΠΎΠΊΠΈ ΠΌΠΎΠ½ΡΠ°ΠΆΠ°. ΠΠ°ΠΆΠ½ΡΠΌ Π°ΡΠΏΠ΅ΠΊΡΠΎΠΌ ΡΠ²Π»ΡΠ΅ΡΡΡ ΡΠ°ΠΊΠΆΠ΅ ΠΈΡΠΏΠΎΠ»ΡΠ·ΠΎΠ²Π°Π½ΠΈΠ΅ ΠΏΡΠ΅Π΄Π½Π°ΠΏΡΡΠΆΠ΅Π½Π½ΠΎΠΉ Π°ΡΠΌΠ°ΡΡΡΡ, ΡΡΠΎ ΡΠΏΠΎΡΠΎΠ±ΡΡΠ²ΡΠ΅Ρ ΡΠ½ΠΈΠΆΠ΅Π½ΠΈΡ Π²Π΅Π»ΠΈΡΠΈΠ½Ρ ΠΏΡΠΎΠ³ΠΈΠ±ΠΎΠ² ΠΈ ΡΠΌΠ΅Π½ΡΡΠ΅Π½ΠΈΡ ΡΡΠ΅ΡΠΈΠ½ΠΎΠΎΠ±ΡΠ°Π·ΠΎΠ²Π°Π½ΠΈΡ. ΠΡΡΠ»Π΅Π΄ΠΎΠ²Π°Π½ΠΈΠ΅ ΠΏΠΎΠΊΠ°Π·Π°Π»ΠΎ Π²ΡΡΠΎΠΊΡΡ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΠΎΡΡΡ ΠΏΡΠΈΠΌΠ΅Π½Π΅Π½ΠΈΡ ΡΠΎΠ²ΡΠ΅ΠΌΠ΅Π½Π½ΡΡ ΡΡΡΠΎΠΈΡΠ΅Π»ΡΠ½ΡΡ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»ΠΎΠ² ΠΈ ΡΠ΅Ρ Π½ΠΎΠ»ΠΎΠ³ΠΈΠΉ, ΡΠΏΠΎΡΠΎΠ±ΡΡΠ²ΡΡΡΠΈΡ ΡΠ»ΡΡΡΠ΅Π½ΠΈΡ ΡΠΊΡΠΏΠ»ΡΠ°ΡΠ°ΡΠΈΠΎΠ½Π½ΡΡ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊ ΠΊΠΎΠ½ΡΡΡΡΠΊΡΠΈΠΉ ΠΏΡΠΈ ΡΠ½ΠΈΠΆΠ΅Π½ΠΈΠΈ ΠΈΡ ΡΡΠΎΠΈΠΌΠΎΡΡΠΈ ΠΈ ΡΡΡΠ΄ΠΎΠ·Π°ΡΡΠ°Ρ. ΠΠ»ΡΡΠ΅Π²ΡΠ΅ ΡΠ»ΠΎΠ²Π°: ΡΡΠ΅ΡΠΈΠ½ΠΎΡΡΠΎΠΉΠΊΠΎΡΡΡ, Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠ²Π½ΠΎΡΡΡ, ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½, ΠΆΠ΅Π»Π΅Π·ΠΎΠ±Π΅ΡΠΎΠ½Π½Π°Ρ Π±Π°Π»ΠΊΠ°, Π°ΡΠΌΠ°ΡΡΡΠ°, ΡΡΠΆΠ΅Π»ΡΠΉ Π±Π΅ΡΠΎΠ½.
- 30 September 2025
- Published byΒ Toraighyrov UniversityΒ inΒ Science and Technology of Kazakhstan
- No.Β 3,2025,p. 408-418
Π’ΡΠ΅ΡΠΈΠ½ΠΎΡΡΠΎΠΉΠΊΠΎΡΡΡ ΠΈ Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠ²Π½ΠΎΡΡΡ Π±Π°Π»ΠΎΠΊ ΠΈΠ· ΡΡΠΆΠ΅Π»ΠΎΠ³ΠΎ Π±Π΅ΡΠΎΠ½Π° ΠΈ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π°
Π Π΄Π°Π½Π½ΠΎΠΉ ΡΠ°Π±ΠΎΡΠ΅ ΠΈΡΡΠ»Π΅Π΄ΡΠ΅ΡΡΡ ΠΏΡΠΎΠ΅ΠΊΡΠΈΡΠΎΠ²Π°Π½ΠΈΠ΅ ΠΆΠ΅Π»Π΅Π·ΠΎΠ±Π΅ΡΠΎΠ½Π½ΡΡ ΠΈ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π½ΡΡ Π±Π°Π»ΠΎΠΊ Ρ Π°ΠΊΡΠ΅Π½ΡΠΎΠΌ Π½Π° ΠΈΡ Π°ΡΠΌΠΈΡΠΎΠ²Π°Π½ΠΈΠ΅, Π½Π΅ΡΡΡΡΡ ΡΠΏΠΎΡΠΎΠ±Π½ΠΎΡΡΡ, Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠΎΠ½Π½ΡΠ΅ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊΠΈ ΠΈ ΡΠΊΠΎΠ½ΠΎΠΌΠΈΡΠ΅ΡΠΊΡΡ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΠΎΡΡΡ. Π Π°ΡΡΠΌΠΎΡΡΠ΅Π½Ρ ΡΡΠΈ Π²ΠΎΠ·ΠΌΠΎΠΆΠ½ΡΡ Π²Π°ΡΠΈΠ°Π½ΡΠ° Π°ΡΠΌΠΈΡΠΎΠ²Π°Π½ΠΈΡ ΠΆΠ΅Π»Π΅Π·ΠΎΠ±Π΅ΡΠΎΠ½Π½ΠΎΠΉ Π±Π°Π»ΠΊΠΈ Ρ ΡΡΠ΅ΡΠΎΠΌ ΡΡΠ΅Π±ΡΠ΅ΠΌΠΎΠΉ ΠΏΠ»ΠΎΡΠ°Π΄ΠΈ ΡΠ°Π±ΠΎΡΠ΅ΠΉ Π°ΡΠΌΠ°ΡΡΡΡ ΠΈ ΠΊΠΎΠ½ΡΡΡΡΠΊΡΠΈΠ²Π½ΡΡ ΠΎΡΠΎΠ±Π΅Π½Π½ΠΎΡΡΠ΅ΠΉ: ΠΈΡΠΏΠΎΠ»ΡΠ·ΠΎΠ²Π°Π½ΠΈΠ΅ 2 ΡΡΠ΅ΡΠΆΠ½Π΅ΠΉ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 28 ΠΌΠΌ., 3 ΡΡΠ΅ΡΠΆΠ½Π΅ΠΉ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 25 ΠΌΠΌ. ΠΈ 4 ΡΡΠ΅ΡΠΆΠ½Π΅ΠΉ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 20 ΠΌΠΌ. ΠΠ½Π°Π»ΠΈΠ· ΠΏΠΎΠΊΠ°Π·Π°Π», ΡΡΠΎ Π½Π°ΠΈΠ±ΠΎΠ»Π΅Π΅ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΡΠΌΠΈ Ρ ΡΠΎΡΠΊΠΈ Π·ΡΠ΅Π½ΠΈΡ Π½Π΅ΡΡΡΠ΅ΠΉ ΡΠΏΠΎΡΠΎΠ±Π½ΠΎΡΡΠΈ ΠΈ ΡΠΊΠΎΠ½ΠΎΠΌΠΈΠΈ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»Π° ΡΠ²Π»ΡΡΡΡΡ Π²Π°ΡΠΈΠ°Π½ΡΡ Ρ 2 ΡΡΠ΅ΡΠΆΠ½ΡΠΌΠΈ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 28 ΠΌΠΌ. ΠΈ 4 ΡΡΠ΅ΡΠΆΠ½ΡΠΌΠΈ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 20 ΠΌΠΌ., ΠΏΡΠΈ ΡΡΠΎΠΌ Π²Π°ΡΠΈΠ°Π½Ρ Ρ 3 ΡΡΠ΅ΡΠΆΠ½ΡΠΌΠΈ Π΄ΠΈΠ°ΠΌΠ΅ΡΡΠΎΠΌ 25 ΠΌΠΌ. Π½Π΅ ΠΎΠΏΡΠ°Π²Π΄ΡΠ²Π°Π΅Ρ ΠΏΠ΅ΡΠ΅ΡΠ°ΡΡ ΠΎΠ΄ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»Π°. Π ΡΠ»ΡΡΠ°Π΅ ΠΏΡΠΈΠΌΠ΅Π½Π΅Π½ΠΈΡ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π° ΠΊΠ»Π°ΡΡΠ° B25 Π±ΡΠ»ΠΎ ΠΏΡΠΎΠ΄Π΅ΠΌΠΎΠ½ΡΡΡΠΈΡΠΎΠ²Π°Π½ΠΎ ΡΠ½ΠΈΠΆΠ΅Π½ΠΈΠ΅ ΡΠ°ΡΡ ΠΎΠ΄Π° Π°ΡΠΌΠ°ΡΡΡΡ Π½Π° 15% ΠΏΡΠΈ ΡΠΎΡ ΡΠ°Π½Π΅Π½ΠΈΠΈ Π½Π΅ΡΡΡΠ΅ΠΉ ΡΠΏΠΎΡΠΎΠ±Π½ΠΎΡΡΠΈ ΠΈ ΡΠ»ΡΡΡΠ΅Π½ΠΈΠΈ Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠΎΠ½Π½ΡΡ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊ, ΡΡΠΎ Π²ΡΡΠ°ΠΆΠ°Π΅ΡΡΡ Π² ΡΠΌΠ΅Π½ΡΡΠ΅Π½ΠΈΠΈ ΠΏΡΠΎΠ³ΠΈΠ±Π° Π½Π° 14%. ΠΡΠΈΠΌΠ΅Π½Π΅Π½ΠΈΠ΅ ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½Π° ΠΏΠΎΠ·Π²ΠΎΠ»ΠΈΠ»ΠΎ ΡΠ°ΠΊΠΆΠ΅ ΡΠ½ΠΈΠ·ΠΈΡΡ ΡΡΡΠ΄ΠΎΠ·Π°ΡΡΠ°ΡΡ Π½Π° 25-30% ΠΈ ΡΠΎΠΊΡΠ°ΡΠΈΡΡ ΡΡΠΎΠΊΠΈ ΠΌΠΎΠ½ΡΠ°ΠΆΠ°. ΠΠ°ΠΆΠ½ΡΠΌ Π°ΡΠΏΠ΅ΠΊΡΠΎΠΌ ΡΠ²Π»ΡΠ΅ΡΡΡ ΡΠ°ΠΊΠΆΠ΅ ΠΈΡΠΏΠΎΠ»ΡΠ·ΠΎΠ²Π°Π½ΠΈΠ΅ ΠΏΡΠ΅Π΄Π½Π°ΠΏΡΡΠΆΠ΅Π½Π½ΠΎΠΉ Π°ΡΠΌΠ°ΡΡΡΡ, ΡΡΠΎ ΡΠΏΠΎΡΠΎΠ±ΡΡΠ²ΡΠ΅Ρ ΡΠ½ΠΈΠΆΠ΅Π½ΠΈΡ Π²Π΅Π»ΠΈΡΠΈΠ½Ρ ΠΏΡΠΎΠ³ΠΈΠ±ΠΎΠ² ΠΈ ΡΠΌΠ΅Π½ΡΡΠ΅Π½ΠΈΡ ΡΡΠ΅ΡΠΈΠ½ΠΎΠΎΠ±ΡΠ°Π·ΠΎΠ²Π°Π½ΠΈΡ. ΠΡΡΠ»Π΅Π΄ΠΎΠ²Π°Π½ΠΈΠ΅ ΠΏΠΎΠΊΠ°Π·Π°Π»ΠΎ Π²ΡΡΠΎΠΊΡΡ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΠΎΡΡΡ ΠΏΡΠΈΠΌΠ΅Π½Π΅Π½ΠΈΡ ΡΠΎΠ²ΡΠ΅ΠΌΠ΅Π½Π½ΡΡ ΡΡΡΠΎΠΈΡΠ΅Π»ΡΠ½ΡΡ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»ΠΎΠ² ΠΈ ΡΠ΅Ρ Π½ΠΎΠ»ΠΎΠ³ΠΈΠΉ, ΡΠΏΠΎΡΠΎΠ±ΡΡΠ²ΡΡΡΠΈΡ ΡΠ»ΡΡΡΠ΅Π½ΠΈΡ ΡΠΊΡΠΏΠ»ΡΠ°ΡΠ°ΡΠΈΠΎΠ½Π½ΡΡ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊ ΠΊΠΎΠ½ΡΡΡΡΠΊΡΠΈΠΉ ΠΏΡΠΈ ΡΠ½ΠΈΠΆΠ΅Π½ΠΈΠΈ ΠΈΡ ΡΡΠΎΠΈΠΌΠΎΡΡΠΈ ΠΈ ΡΡΡΠ΄ΠΎΠ·Π°ΡΡΠ°Ρ. ΠΠ»ΡΡΠ΅Π²ΡΠ΅ ΡΠ»ΠΎΠ²Π°: ΡΡΠ΅ΡΠΈΠ½ΠΎΡΡΠΎΠΉΠΊΠΎΡΡΡ, Π΄Π΅ΡΠΎΡΠΌΠ°ΡΠΈΠ²Π½ΠΎΡΡΡ, ΡΡΠ°Π»Π΅ΡΠΈΠ±ΡΠΎΠ±Π΅ΡΠΎΠ½, ΠΆΠ΅Π»Π΅Π·ΠΎΠ±Π΅ΡΠΎΠ½Π½Π°Ρ Π±Π°Π»ΠΊΠ°, Π°ΡΠΌΠ°ΡΡΡΠ°, ΡΡΠΆΠ΅Π»ΡΠΉ Π±Π΅ΡΠΎΠ½.
- 30 June 2025
- Published byΒ Toraighyrov UniversityΒ inΒ Science and Technology of Kazakhstan
- No.Β 2,2025,p. 423-489
THE ADHESIVE JOINTS OF WOODEN STRUCTURES: EXPERIMENTAL INVESTIGATION OF GLUED I BEAM
This research presents the results of an experimental campaign on glued wooden I-beams. The work involved two types of glued wooden beams technique. The key investigation parameters were the variation of bonding approaches on the OSB board (in grove, and side glue). The groove connection ensures uniform load distribution within the joint area. A force applied perpendicular to the surface of one component is evenly transmitted to adjacent parts through the ridge and tongue. The forces generated in the connection area are substantially lower than the bearing capacity of the connected elements, enhancing the structureβs overall reliability. This approach increases the contact area between connected parts, thereby improving the strength and durability of the adhesive joint. The I-beam glued wooden beams prepared for the experiment were subjected to stress to determine the strength characteristics. The experimental program also aimed to analyze the influence of these beam bonding methods on the overall deformation behavior at different loading levels. Keywords: I-beam, wood, glued, wooden bars, glued timber, OSB.
- 30 June 2025
- Published byΒ Toraighyrov UniversityΒ inΒ Science and Technology of Kazakhstan
- No.Β 2,2025,p. 423-489
THE ADHESIVE JOINTS OF WOODEN STRUCTURES: EXPERIMENTAL INVESTIGATION OF GLUED I BEAM
This research presents the results of an experimental campaign on glued wooden I-beams. The work involved two types of glued wooden beams technique. The key investigation parameters were the variation of bonding approaches on the OSB board (in grove, and side glue). The groove connection ensures uniform load distribution within the joint area. A force applied perpendicular to the surface of one component is evenly transmitted to adjacent parts through the ridge and tongue. The forces generated in the connection area are substantially lower than the bearing capacity of the connected elements, enhancing the structureβs overall reliability. This approach increases the contact area between connected parts, thereby improving the strength and durability of the adhesive joint. The I-beam glued wooden beams prepared for the experiment were subjected to stress to determine the strength characteristics. The experimental program also aimed to analyze the influence of these beam bonding methods on the overall deformation behavior at different loading levels. Keywords: I-beam, wood, glued, wooden bars, glued timber, OSB.
- Open Access
- 30 April 2025
- Published byΒ Private Company Technology CenterΒ inΒ Eastern-European Journal of Enterprise Technologies
- Vol.Β 2 Β (6 (134)) , 44-52
Assessment of the chemical resistance of concrete with an additive based on granite dust and acrylic latex
The object of the study is the chemical resistance of concrete modified with granite dust and acrylic latex. The materials used in the study were concrete samples with a variable composition of additive components, which were subsequently exposed to an aggressive environment. The problem, which the research is aimed at solving, is the tendency of concrete structures to fail under prolonged exposure to acidic conditions, which significantly reduces their service life. This research aims to address this issue by incorporating modifying additives that improve concreteβs resistance to chemical attack. The experimental program involved testing concrete specimens with different concentrations of granite dust (1β4 % by cement mass) and acrylic latex (0.1β0.4 % by water mass) in a 10 % sulfuric acid solution for up to 360 days. Strength loss was assessed at regular intervals, and chemical resistance coefficients were calculated to evaluate durability. Additionally, long-term degradation predictions were made using logarithmic models. The results show that the optimal composition β 4 % granite dust and 0.4 % acrylic latex βsignificantly improves chemical resistance, with specimens retaining up to 49 % of their initial strength after 100 years of exposure. The enhancement is attributed to the densification effect of granite dust, which reduces permeability, and the hydrophobizing properties of acrylic latex, which minimize acid penetration. Compared to unmodified concrete, the proposed composition demonstrates lower strength loss and higher durability under aggressive conditions. The proposed modified composition offers a reliable solution for extending the service life of reinforced concrete structures exposed to chemical degradation
- 30 April 2025
- Published byΒ Private Company Technology CenterΒ inΒ Eastern-European Journal of Enterprise Technologies
- Vol.Β 2 Β (6 (134)) , 44-52
Open AccessAssessment of the chemical resistance of concrete with an additive based on granite dust and acrylic latex
The object of the study is the chemical resistance of concrete modified with granite dust and acrylic latex. The materials used in the study were concrete samples with a variable composition of additive components, which were subsequently exposed to an aggressive environment. The problem, which the research is aimed at solving, is the tendency of concrete structures to fail under prolonged exposure to acidic conditions, which significantly reduces their service life. This research aims to address this issue by incorporating modifying additives that improve concreteβs resistance to chemical attack. The experimental program involved testing concrete specimens with different concentrations of granite dust (1β4 % by cement mass) and acrylic latex (0.1β0.4 % by water mass) in a 10 % sulfuric acid solution for up to 360 days. Strength loss was assessed at regular intervals, and chemical resistance coefficients were calculated to evaluate durability. Additionally, long-term degradation predictions were made using logarithmic models. The results show that the optimal composition β 4 % granite dust and 0.4 % acrylic latex βsignificantly improves chemical resistance, with specimens retaining up to 49 % of their initial strength after 100 years of exposure. The enhancement is attributed to the densification effect of granite dust, which reduces permeability, and the hydrophobizing properties of acrylic latex, which minimize acid penetration. Compared to unmodified concrete, the proposed composition demonstrates lower strength loss and higher durability under aggressive conditions. The proposed modified composition offers a reliable solution for extending the service life of reinforced concrete structures exposed to chemical degradation