Gui Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gui Zhou has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Cunhua Pan
4 shared publicationsHong Ren
3 shared publications- Hong Ren
Southeast University
3 shared publications - Cunhua Pan
Southeast University
2 shared publications - Jiangzhou Wang
Southeast University
2 shared publications - Robert Schober
Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
2 shared publications
Latest Publications
- Open Access
Energy-Efficient Design for Downlink Pinching-Antenna Systems with QoS Guarantee
Pinching antennas have recently garnered significant attention due to their ability to dynamically reconfigure wireless propagation environments. Despite notable advancements in this area, the exploration of energy efficiency (EE) maximization in pinching-antenna systems remains relatively underdeveloped. In this paper, we address the EE maximization problem in a downlink time-division multiple access (TDMA)-based multi-user system employing one waveguide and multiple pinching antennas, where each user is subject to a minimum rate constraint to ensure quality-of-service. The formulated optimization problem jointly considers transmit power and time allocations as well as the positioning of pinching antennas, resulting in a non-convex problem. To tackle this challenge, we first obtain the optimal positions of the pinching antennas. Based on this, we establish a feasibility condition for the system. Subsequently, the joint power and time allocation problem is decomposed into two subproblems, which are solved iteratively until convergence. Specifically, the power allocation subproblem is addressed through an iterative approach, where a semi-analytical solution is obtained in each iteration. Likewise, a semi-analytical solution is derived for the time allocation subproblem. Numerical simulations demonstrate that the proposed pinching-antenna-based strategy significantly outperforms both conventional fixed-antenna systems and other benchmark pinching-antenna schemes in terms of EE.
Open AccessEnergy-Efficient Design for Downlink Pinching-Antenna Systems with QoS Guarantee
Pinching antennas have recently garnered significant attention due to their ability to dynamically reconfigure wireless propagation environments. Despite notable advancements in this area, the exploration of energy efficiency (EE) maximization in pinching-antenna systems remains relatively underdeveloped. In this paper, we address the EE maximization problem in a downlink time-division multiple access (TDMA)-based multi-user system employing one waveguide and multiple pinching antennas, where each user is subject to a minimum rate constraint to ensure quality-of-service. The formulated optimization problem jointly considers transmit power and time allocations as well as the positioning of pinching antennas, resulting in a non-convex problem. To tackle this challenge, we first obtain the optimal positions of the pinching antennas. Based on this, we establish a feasibility condition for the system. Subsequently, the joint power and time allocation problem is decomposed into two subproblems, which are solved iteratively until convergence. Specifically, the power allocation subproblem is addressed through an iterative approach, where a semi-analytical solution is obtained in each iteration. Likewise, a semi-analytical solution is derived for the time allocation subproblem. Numerical simulations demonstrate that the proposed pinching-antenna-based strategy significantly outperforms both conventional fixed-antenna systems and other benchmark pinching-antenna schemes in terms of EE.
- Open Access
Channel Estimation for mmWave Pinching-Antenna Systems
The full potential of pinching-antenna systems (PAS) can be unblocked if pinching antennas can be accurately activated at positions tailored for the serving users', which means that acquiring accurate channel state information (CSI) at arbitrary positions along the waveguide is essential for the precise placement of antennas. In this work, we propose an innovative channel estimation scheme for millimeter-wave (mmWave) PAS. The proposed approach requires activating only a small number of pinching antennas, thereby limiting antenna switching and pilot overhead. Specifically, a base station (BS) equipped with a waveguide selectively activates subarrays located near and far from the feed point, each comprising a small number of pinching antennas. This configuration effectively emulates a large-aperture array, enabling high-accuracy estimation of multipath propagation parameters, including angles, delays, and path gains. Simulation results demonstrate that the proposed method achieves accurate CSI estimation and data rates while effectively reducing hardware switching and pilot overhead.
Open AccessChannel Estimation for mmWave Pinching-Antenna Systems
The full potential of pinching-antenna systems (PAS) can be unblocked if pinching antennas can be accurately activated at positions tailored for the serving users', which means that acquiring accurate channel state information (CSI) at arbitrary positions along the waveguide is essential for the precise placement of antennas. In this work, we propose an innovative channel estimation scheme for millimeter-wave (mmWave) PAS. The proposed approach requires activating only a small number of pinching antennas, thereby limiting antenna switching and pilot overhead. Specifically, a base station (BS) equipped with a waveguide selectively activates subarrays located near and far from the feed point, each comprising a small number of pinching antennas. This configuration effectively emulates a large-aperture array, enabling high-accuracy estimation of multipath propagation parameters, including angles, delays, and path gains. Simulation results demonstrate that the proposed method achieves accurate CSI estimation and data rates while effectively reducing hardware switching and pilot overhead.
- Open Access
Addressing the Mutual Interference in Uplink ISAC Receivers: A Projection Method
Dual function radar and communication (DFRC) is a promising research direction within integrated sensing and communication (ISAC), improving hardware and spectrum efficiency by merging sensing and communication (S&C) functionalities into a shared platform. However, the DFRC receiver (DFRC-R) is tasked with both uplink communication signal detection and simultaneously target-related parameter estimation from the echoes, leading to issues with mutual interference. In this paper, a projection-based scheme is proposed to equivalently transform the joint signal detection and target estimation problem into a joint signal detection process across multiple snapshots. Compared with conventional successive interference cancellation (SIC) schemes, our proposed approach achieves a higher signal-to-noise ratio (SNR), and a higher ergodic rate when the radar signal is non-negligible. Nonetheless, it introduces an ill-conditioned signal detection problem, which is addressed using a non-linear detector. By jointly processing an increased number of snapshots, the proposed scheme can achieve high S&C performance simultaneously.
Open AccessAddressing the Mutual Interference in Uplink ISAC Receivers: A Projection Method
Dual function radar and communication (DFRC) is a promising research direction within integrated sensing and communication (ISAC), improving hardware and spectrum efficiency by merging sensing and communication (S&C) functionalities into a shared platform. However, the DFRC receiver (DFRC-R) is tasked with both uplink communication signal detection and simultaneously target-related parameter estimation from the echoes, leading to issues with mutual interference. In this paper, a projection-based scheme is proposed to equivalently transform the joint signal detection and target estimation problem into a joint signal detection process across multiple snapshots. Compared with conventional successive interference cancellation (SIC) schemes, our proposed approach achieves a higher signal-to-noise ratio (SNR), and a higher ergodic rate when the radar signal is non-negligible. Nonetheless, it introduces an ill-conditioned signal detection problem, which is addressed using a non-linear detector. By jointly processing an increased number of snapshots, the proposed scheme can achieve high S&C performance simultaneously.
- Open Access
Reconfigurable Intelligent Surface-Aided Dual-Function Radar and Communication Systems With MU-MIMO Communication
In this paper, we investigate an reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. Our objective is to maximize the achievable sum rate of the multi-antenna communication users through the joint active and passive beamforming. {Specifically}, the weighted minimum mean-square error (WMMSE) method is { first} used to reformulate the original problem into an equivalent one. Then, we utilize an alternating optimization (AO) { algorithm} to decouple the optimization variables and decompose this challenging problem into two subproblems. Given reflecting coefficients, a penalty-based algorithm is utilized to deal with the non-convex radar signal-to-noise ratio (SNR) constraints. For the given beamforming matrix of the BS, we apply majorization-minimization (MM) to transform the problem into a quadratic constraint quadratic programming (QCQP) problem, which is ultimately solved using a semidefinite relaxation (SDR)-based algorithm. Simulation results illustrate the advantage of deploying RIS in the considered multi-user MIMO (MU-MIMO) ISAC systems.
Open AccessReconfigurable Intelligent Surface-Aided Dual-Function Radar and Communication Systems With MU-MIMO Communication
In this paper, we investigate an reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. Our objective is to maximize the achievable sum rate of the multi-antenna communication users through the joint active and passive beamforming. {Specifically}, the weighted minimum mean-square error (WMMSE) method is { first} used to reformulate the original problem into an equivalent one. Then, we utilize an alternating optimization (AO) { algorithm} to decouple the optimization variables and decompose this challenging problem into two subproblems. Given reflecting coefficients, a penalty-based algorithm is utilized to deal with the non-convex radar signal-to-noise ratio (SNR) constraints. For the given beamforming matrix of the BS, we apply majorization-minimization (MM) to transform the problem into a quadratic constraint quadratic programming (QCQP) problem, which is ultimately solved using a semidefinite relaxation (SDR)-based algorithm. Simulation results illustrate the advantage of deploying RIS in the considered multi-user MIMO (MU-MIMO) ISAC systems.
- Open Access
Active RIS Aided ISAC Systems: Beamforming Design and Performance Analysis
This paper considers an active reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. We aim to maximize radar signal-to-interference-plus-noise-ratio (SINR) by jointly optimizing the beamforming matrix at the dual-function radar-communication (DFRC) base station (BS) and the reflecting coefficients at the active RIS subject to the quality of service (QoS) constraints of communication users (UE) and the transmit power constraints of active RIS and DFRC BS. To tackle the optimization problem, the majorization-minimization (MM) algorithm is applied to address the nonconvex radar SINR objective function, and the resulting quartic problem is solved by developing an semidefinite relaxation (SDR)-based approach. Moreover, we derive the scaling order of the radar SINR with a large number of reflecting elements. Next, the transmit power allocation problem and the deployment strategy of the active RIS are studied with a moderate number of reflecting elements. Finally, we validate the potential of the active RIS in ISAC systems compared to passive RIS. Additionally, we deliberate on several open problems that remain for future research.
Open AccessActive RIS Aided ISAC Systems: Beamforming Design and Performance Analysis
This paper considers an active reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. We aim to maximize radar signal-to-interference-plus-noise-ratio (SINR) by jointly optimizing the beamforming matrix at the dual-function radar-communication (DFRC) base station (BS) and the reflecting coefficients at the active RIS subject to the quality of service (QoS) constraints of communication users (UE) and the transmit power constraints of active RIS and DFRC BS. To tackle the optimization problem, the majorization-minimization (MM) algorithm is applied to address the nonconvex radar SINR objective function, and the resulting quartic problem is solved by developing an semidefinite relaxation (SDR)-based approach. Moreover, we derive the scaling order of the radar SINR with a large number of reflecting elements. Next, the transmit power allocation problem and the deployment strategy of the active RIS are studied with a moderate number of reflecting elements. Finally, we validate the potential of the active RIS in ISAC systems compared to passive RIS. Additionally, we deliberate on several open problems that remain for future research.
- Open Access
Outage Constrained Robust Transmission Design for IRS-aided Secure Communications with Direct Communication Links
In this paper, we investigate the robust outage constrained transmission design for an intelligent reflecting surface (IRS) aided secure communication system. We assume that a single-antenna legitimate receiver (Bob) served by a multi-antenna base station (BS) is overheard by multiple single-antenna eavesdroppers (Eves), and the artificial noise (AN) is incorporated to confuse the Eves. In particular, we aim to jointly optimize the transmit beamforming, the AN spatial distribution at the BS, and the passive beamforming at the IRS, where the Eve-related channels are assumed to be imperfect due to the channel estimation errors and their concealment. Two scenarios with partial channel state information (CSI) error of only cascaded BS-IRS-Eve channel and full CSI errors of both cascaded BS-IRS-Eve channel and direct BS-Eve channel are investigated under the statistical CSI error model. An outage-constrained power minimization problem is formulated by limiting the maximum allowable data rate of Eves and ensuring the minimum data rate requirement of Bob. To solve it, the Bernstein-type inequality and alternating optimization strategy are exploited, and artful mathematical manipulations are performed to facilitate the optimization on the phase shifts of the IRS. Simulation results confirm the performance advantages of the proposed algorithm.
Open AccessOutage Constrained Robust Transmission Design for IRS-aided Secure Communications with Direct Communication Links
In this paper, we investigate the robust outage constrained transmission design for an intelligent reflecting surface (IRS) aided secure communication system. We assume that a single-antenna legitimate receiver (Bob) served by a multi-antenna base station (BS) is overheard by multiple single-antenna eavesdroppers (Eves), and the artificial noise (AN) is incorporated to confuse the Eves. In particular, we aim to jointly optimize the transmit beamforming, the AN spatial distribution at the BS, and the passive beamforming at the IRS, where the Eve-related channels are assumed to be imperfect due to the channel estimation errors and their concealment. Two scenarios with partial channel state information (CSI) error of only cascaded BS-IRS-Eve channel and full CSI errors of both cascaded BS-IRS-Eve channel and direct BS-Eve channel are investigated under the statistical CSI error model. An outage-constrained power minimization problem is formulated by limiting the maximum allowable data rate of Eves and ensuring the minimum data rate requirement of Bob. To solve it, the Bernstein-type inequality and alternating optimization strategy are exploited, and artful mathematical manipulations are performed to facilitate the optimization on the phase shifts of the IRS. Simulation results confirm the performance advantages of the proposed algorithm.
- Open Access
Channel Estimation for RIS-Aided Multi-User mmWave Systems with Uniform Planar Arrays
In this paper, we adopt a three-stage based uplink channel estimation protocol with reduced pilot overhead for an reconfigurable intelligent surface (RIS)-aided multi-user (MU) millimeter wave (mmWave) communication system, in which both the base station (BS) and the RIS are equipped with a uniform planar array (UPA). Specifically, in Stage I, the channel state information (CSI) of a typical user is estimated. To address the power leakage issue for the common angles-of-arrival (AoAs) estimation in this stage, we develop a low-complexity one-dimensional search method. In Stage II, a re-parameterized common BS-RIS channel is constructed with the estimated information from Stage I to estimate other users' CSI. In Stage III, only the rapidly varying channel gains need to re-estimated. Furthermore, the proposed method can be extended to multi-antenna UPA-type users, by decomposing the estimation of a multi-antenna channel with $J$ scatterers into estimating $J$ single-scatterer channels for a virtual single-antenna user. An orthogonal matching pursuit (OMP)-based method is proposed to estimate the angles-of-departure (AoDs) at the users. Simulation results demonstrate that the proposed algorithm significantly achieves high channel estimation accuracy, which approaches the genie-aided upper bound in the high SNR regime.Open AccessChannel Estimation for RIS-Aided Multi-User mmWave Systems with Uniform Planar Arrays
In this paper, we adopt a three-stage based uplink channel estimation protocol with reduced pilot overhead for an reconfigurable intelligent surface (RIS)-aided multi-user (MU) millimeter wave (mmWave) communication system, in which both the base station (BS) and the RIS are equipped with a uniform planar array (UPA). Specifically, in Stage I, the channel state information (CSI) of a typical user is estimated. To address the power leakage issue for the common angles-of-arrival (AoAs) estimation in this stage, we develop a low-complexity one-dimensional search method. In Stage II, a re-parameterized common BS-RIS channel is constructed with the estimated information from Stage I to estimate other users' CSI. In Stage III, only the rapidly varying channel gains need to re-estimated. Furthermore, the proposed method can be extended to multi-antenna UPA-type users, by decomposing the estimation of a multi-antenna channel with $J$ scatterers into estimating $J$ single-scatterer channels for a virtual single-antenna user. An orthogonal matching pursuit (OMP)-based method is proposed to estimate the angles-of-departure (AoDs) at the users. Simulation results demonstrate that the proposed algorithm significantly achieves high channel estimation accuracy, which approaches the genie-aided upper bound in the high SNR regime. - Open Access
A Framework for Transmission Design for Active RIS-Aided Communication with Partial CSI
Active reconfigurable intelligent surfaces (RISs) have recently been proposed to compensate for the severe multiplicative fading effect of conventional passive RIS-aided systems. Each reflecting element of active RISs is assisted by an amplifier such that the incident signal can be reflected and amplified instead of only being reflected as in passive RIS-aided systems. This work addresses the practical challenge that, on the one hand, in active RIS-aided systems the perfect individual CSI of the RIS-aided channels cannot be acquired due to the lack of signal processing power at the active RISs, but, on the other hand, this CSI is required to calculate the expected system data rate and RIS transmit power needed for transceiver design. To address this issue, we first derive closed-form expressions for the average achievable rate and the average RIS transmit power based on partial CSI of the RIS-aided channels. Then, we formulate an average achievable rate maximization problem for jointly optimizing the active beamforming at both the base station (BS) and the RIS. This problem is then tackled using the majorization--minimization (MM) algorithm framework, and, for each iteration, semi-closed-form solutions for the BS and RIS beamforming are derived based on the Karush-Kuhn-Tucker (KKT) conditions. To ensure the quality of service (QoS) of each user, we further formulate a rate outage constrained beamforming problem, which is solved using the Bernstein-Type inequality (BTI) and semidefinite relaxation (SDR) techniques. Numerical results show that the proposed algorithms can efficiently overcome the challenges imposed by imperfect CSI in active RIS-aided wireless systems.
Open AccessA Framework for Transmission Design for Active RIS-Aided Communication with Partial CSI
Active reconfigurable intelligent surfaces (RISs) have recently been proposed to compensate for the severe multiplicative fading effect of conventional passive RIS-aided systems. Each reflecting element of active RISs is assisted by an amplifier such that the incident signal can be reflected and amplified instead of only being reflected as in passive RIS-aided systems. This work addresses the practical challenge that, on the one hand, in active RIS-aided systems the perfect individual CSI of the RIS-aided channels cannot be acquired due to the lack of signal processing power at the active RISs, but, on the other hand, this CSI is required to calculate the expected system data rate and RIS transmit power needed for transceiver design. To address this issue, we first derive closed-form expressions for the average achievable rate and the average RIS transmit power based on partial CSI of the RIS-aided channels. Then, we formulate an average achievable rate maximization problem for jointly optimizing the active beamforming at both the base station (BS) and the RIS. This problem is then tackled using the majorization--minimization (MM) algorithm framework, and, for each iteration, semi-closed-form solutions for the BS and RIS beamforming are derived based on the Karush-Kuhn-Tucker (KKT) conditions. To ensure the quality of service (QoS) of each user, we further formulate a rate outage constrained beamforming problem, which is solved using the Bernstein-Type inequality (BTI) and semidefinite relaxation (SDR) techniques. Numerical results show that the proposed algorithms can efficiently overcome the challenges imposed by imperfect CSI in active RIS-aided wireless systems.
- Open Access
A Framework for Mutual Information-based MIMO Integrated Sensing and Communication Beamforming Design
Integrated sensing and communication (ISAC) unifies sensing and communication, and improves the efficiency of the spectrum, energy, and hardware. In this work, we investigate the ISAC beamforming design to maximize the mutual information between the target response matrix of a point radar target and the echo signals, while ensuring the data rate requirements of the communication users. In order to study the impact of the echo interference caused by communication users on sensing performance, we study two scenarios: a single communication user and multiple communication users. For the case of a single communication user, we consider three types of echo interference, no interference, a point interference, and an extended interference. For the case of multiple communication users, the interference is also an extended one, and furthermore, each user's communication rate requirement needs to be satisfied. To find the optimal beamforming design in these problems, we provide a closed-form solution with low complexiy, a semidefinite relaxation (SDR) method, a low-complexity algorithm based on the Majorization-Minimization (MM) method and the successive convex approximation (SCA) method, and an algorithm based on MM method and SCA method, respectively. Numerical results demonstrate that, compared to the ISAC beamforming schemes based on the Cram\'er-Rao bound (CRB) metric and the beampattern metric, the proposed mutual information metric can bring better beampattern and root mean square error (RMSE) of angle estimation. Furthermore, our proposed schemes designed based on the mutual information metric can suppress the echo interference from the communication users effectively.
Open AccessA Framework for Mutual Information-based MIMO Integrated Sensing and Communication Beamforming Design
Integrated sensing and communication (ISAC) unifies sensing and communication, and improves the efficiency of the spectrum, energy, and hardware. In this work, we investigate the ISAC beamforming design to maximize the mutual information between the target response matrix of a point radar target and the echo signals, while ensuring the data rate requirements of the communication users. In order to study the impact of the echo interference caused by communication users on sensing performance, we study two scenarios: a single communication user and multiple communication users. For the case of a single communication user, we consider three types of echo interference, no interference, a point interference, and an extended interference. For the case of multiple communication users, the interference is also an extended one, and furthermore, each user's communication rate requirement needs to be satisfied. To find the optimal beamforming design in these problems, we provide a closed-form solution with low complexiy, a semidefinite relaxation (SDR) method, a low-complexity algorithm based on the Majorization-Minimization (MM) method and the successive convex approximation (SCA) method, and an algorithm based on MM method and SCA method, respectively. Numerical results demonstrate that, compared to the ISAC beamforming schemes based on the Cram\'er-Rao bound (CRB) metric and the beampattern metric, the proposed mutual information metric can bring better beampattern and root mean square error (RMSE) of angle estimation. Furthermore, our proposed schemes designed based on the mutual information metric can suppress the echo interference from the communication users effectively.