Nikolay Kostyuchenkov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nikolay Kostyuchenkov has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Oksana Kostyuchenkova
Technical Faculty, S. Seifullin Kazakh Agrotechnical Research University, Zhenis Avenue 62, Astana 010000, Kazakhstan
3 shared publications - Aldiyar Bakirov
Agrotechnological Faculty, M. Kozybayev North Kazakhstan University, Petropavl 150000, Kazakhstan
2 shared publications - Aruzhan Omarbekova
Technical Faculty, S. Seifullin Kazakh Agrotechnical Research University, Zhenis Avenue, 62, Astana 010000, Kazakhstan
2 shared publications - Nikolay Zagainov
Technical Faculty, S. Seifullin Kazakh Agrotechnical Research University, Zhenis Avenue 62, Astana 010000, Kazakhstan
2 shared publications A.E. Bakirov
1 shared publication- A.V. Ivanchenko1 shared publication
Latest Publications
- 2 July 2026
- Published by Springer Nature
- p. 191-202
Theoretical Background for the Development of Organic Crop Production Technologies
- 2 July 2026
- Published by Springer Nature
- p. 191-202
Theoretical Background for the Development of Organic Crop Production Technologies
- Open Access
- 18 December 2025
- Published by MDPI AG in Agriengineering
- Vol. 7 (12) , 436
Hall Sensor-Based Detection and Prevention of Seed Misses in Long-Belt Finger-Clip Precision Metering Device
Accurate seed singulation is critical for uniform crop establishment and yield optimization in precision agriculture. This study presents the development and evaluation of a Hall sensor-based Seed Miss Prevention System (SMPS) integrated into a long-belt finger-clip precision metering device for corn (‘Dekalb DKC5032’) and sunflower (‘Astana’). The system utilizes neodymium magnets mounted on seed-picking fingers to trigger a Hall sensor that detects missed seeds in real time and initiates immediate compensation. Laboratory tests across rotational speeds from 10 to 80 rpm showed that the SMPS significantly reduced seed misses, especially within the 10–30 rpm range, where near-perfect singulation was achieved for corn (Miss Index < 0.01). For sunflower, although performance at very low speeds was limited by mechanical variability, the SMPS effectively reduced the miss index by up to 50 % at medium speeds. Statistical analysis (Tukey HSD) confirmed significant improvements in single and double miss prevention across both crops. The proposed Hall sensor-based approach demonstrated a robust, cost-effective, and dust-resistant solution for enhancing seed placement accuracy, providing a strong foundation for the development of intelligent and adaptive precision seeding systems.
- 18 December 2025
- Published by MDPI AG in Agriengineering
- Vol. 7 (12) , 436
Open AccessHall Sensor-Based Detection and Prevention of Seed Misses in Long-Belt Finger-Clip Precision Metering Device
Accurate seed singulation is critical for uniform crop establishment and yield optimization in precision agriculture. This study presents the development and evaluation of a Hall sensor-based Seed Miss Prevention System (SMPS) integrated into a long-belt finger-clip precision metering device for corn (‘Dekalb DKC5032’) and sunflower (‘Astana’). The system utilizes neodymium magnets mounted on seed-picking fingers to trigger a Hall sensor that detects missed seeds in real time and initiates immediate compensation. Laboratory tests across rotational speeds from 10 to 80 rpm showed that the SMPS significantly reduced seed misses, especially within the 10–30 rpm range, where near-perfect singulation was achieved for corn (Miss Index < 0.01). For sunflower, although performance at very low speeds was limited by mechanical variability, the SMPS effectively reduced the miss index by up to 50 % at medium speeds. Statistical analysis (Tukey HSD) confirmed significant improvements in single and double miss prevention across both crops. The proposed Hall sensor-based approach demonstrated a robust, cost-effective, and dust-resistant solution for enhancing seed placement accuracy, providing a strong foundation for the development of intelligent and adaptive precision seeding systems.
- Open Access
- 30 September 2025
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 80 (3) , 201-209
SPEED ACQUISITION FROM INCREMENTAL ROTARY ENCODER FOR ELECTRICALLY DRIVEN PRECISION SEEDER
Precision seeders require accurate real-time speed acquisition to optimize seeding uniformity and resource efficiency, yet existing systems often face complexity, cost, and performance limitations under dynamic field conditions. This study presents a low-cost, embedded solution for rotational speed monitoring using an incremental rotary encoder (HDE38S6-600-N-12-24, 600 PPR) interfaced with an ESP32 microcontroller and a TowerPro SG-90 servo motor, to capture wheel rotation in real time. The firmware uses interrupt-driven pulse counting to calculate rotational speed, and the system was bench-tested using a representative motor setup before integration with a multi-row precision seeder. Experimental evaluation demonstrated that the prototype could reliably monitor rotational speed and output live velocity data via a serial interface. The measured trends closely followed commanded speed changes, confirming the effectiveness of the encoder-based approach. This low-cost, open-platform solution offers a robust and adaptable means of speed sensing for precision seeding, enabling potential closed-loop control of seed metering. The design and successful testing highlight its applicability to modern agricultural equipment, where precise speed feedback can improve planting uniformity and efficiency.
- 30 September 2025
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 80 (3) , 201-209
Open AccessSPEED ACQUISITION FROM INCREMENTAL ROTARY ENCODER FOR ELECTRICALLY DRIVEN PRECISION SEEDER
Precision seeders require accurate real-time speed acquisition to optimize seeding uniformity and resource efficiency, yet existing systems often face complexity, cost, and performance limitations under dynamic field conditions. This study presents a low-cost, embedded solution for rotational speed monitoring using an incremental rotary encoder (HDE38S6-600-N-12-24, 600 PPR) interfaced with an ESP32 microcontroller and a TowerPro SG-90 servo motor, to capture wheel rotation in real time. The firmware uses interrupt-driven pulse counting to calculate rotational speed, and the system was bench-tested using a representative motor setup before integration with a multi-row precision seeder. Experimental evaluation demonstrated that the prototype could reliably monitor rotational speed and output live velocity data via a serial interface. The measured trends closely followed commanded speed changes, confirming the effectiveness of the encoder-based approach. This low-cost, open-platform solution offers a robust and adaptable means of speed sensing for precision seeding, enabling potential closed-loop control of seed metering. The design and successful testing highlight its applicability to modern agricultural equipment, where precise speed feedback can improve planting uniformity and efficiency.
- Open Access
- 25 June 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (13) , 1363
Application of Seed Miss Prevention System for a Spoon-Wheel Type Precision Seed Metering Device: Effectiveness and Limitations
Precision seeding plays a critical role in optimizing crop yield and resource efficiency. This study evaluates the application of a Seed Miss Prevention System (SMPS) integrated with a spoon-wheel precision metering device to mitigate seed misses and enhance its performance. A combination of Discrete Element Method (DEM) simulations, electrical hardware design, mechanical retrofitting, software development and laboratory experiments was employed to assess the effectiveness of the system across multiple seed cultivars and operating speeds. Experimental results demonstrated that the SMPS significantly reduced seed misses at lower operational speeds (3–10 rpm), with the implementation of a dual-sensor configuration further improving detection accuracy by filtering out false positives. At higher speeds (≥15 rpm), however, seed miss rates increased, particularly for irregularly shaped seeds like white beans ‘Great Northern’, due to the mechanical limitations of the metering device. Statistical analyses, including Tukey’s HSD test, confirmed the effectiveness of the SMPS in reducing miss rates across different seed types. Despite these improvements, complete elimination of seed misses was not achieved, highlighting the need for further optimization in seed miss detection. Future research should explore adaptations for higher-speed metering devices and field-scale validations. The findings underscore the potential of SMPS technology in advancing precision agriculture by improving seeding accuracy and operational efficiency.
- 25 June 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (13) , 1363
Open AccessApplication of Seed Miss Prevention System for a Spoon-Wheel Type Precision Seed Metering Device: Effectiveness and Limitations
Precision seeding plays a critical role in optimizing crop yield and resource efficiency. This study evaluates the application of a Seed Miss Prevention System (SMPS) integrated with a spoon-wheel precision metering device to mitigate seed misses and enhance its performance. A combination of Discrete Element Method (DEM) simulations, electrical hardware design, mechanical retrofitting, software development and laboratory experiments was employed to assess the effectiveness of the system across multiple seed cultivars and operating speeds. Experimental results demonstrated that the SMPS significantly reduced seed misses at lower operational speeds (3–10 rpm), with the implementation of a dual-sensor configuration further improving detection accuracy by filtering out false positives. At higher speeds (≥15 rpm), however, seed miss rates increased, particularly for irregularly shaped seeds like white beans ‘Great Northern’, due to the mechanical limitations of the metering device. Statistical analyses, including Tukey’s HSD test, confirmed the effectiveness of the SMPS in reducing miss rates across different seed types. Despite these improvements, complete elimination of seed misses was not achieved, highlighting the need for further optimization in seed miss detection. Future research should explore adaptations for higher-speed metering devices and field-scale validations. The findings underscore the potential of SMPS technology in advancing precision agriculture by improving seeding accuracy and operational efficiency.
- Open Access
- 25 June 2022
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 2 (2 (67)) , 166-176
ИССЛЕДОВАНИЕ ВЛИЯНИЯ ТЕХНОЛОГИЧЕСКИХ ПАРАМЕТРОВ ПРИМЕСИ НА ПРОЦЕСС ОЧИСТКИ СТЕБЕЛЬНЫХ КОРМОВ ОТ ИНОРОДНЫХ ТЕЛ
В статье раскрываются роль грубых стебельных кормов в скармливании крупного рогатого скота и основные проблемы их очистки от инородных примесей при приготовлении. Выявлены причины выхода из строя измельчителей или всей кормоприготовительной линии, нарушения графика кормления, сокращения привеса и надоя животных. Определены требования, предъявляемые к сепарирующим устройствам, и обоснована рациональная конструктивно-технологическая схема сепарирующего устройства с выбором основного объекта исследований – технологический процесс очистки грубых стебельных кормов от инородных твердых примесей пневмомеханическим сепарирующим устройством, новизна которого подтверждена патент на изобретение Республики Казахстан. Представлены результаты теоретических и экспериментальных исследований технологического процесса сепарирующего устройства, получены выражения для расчета его основных конструктивно-технологических и режимных параметров. Изучены и установлены степень влияния технологических свойств и параметров примеси на скорость их витания, что позволяет устанавливать интервалы изменения скорости воздушного потока и расхода воздуха в сепарирующем устройстве для качественной очистки грубых стебельных кормов от инородных примесей при наименьших энергозатратах.
- 25 June 2022
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 2 (2 (67)) , 166-176
Open AccessИССЛЕДОВАНИЕ ВЛИЯНИЯ ТЕХНОЛОГИЧЕСКИХ ПАРАМЕТРОВ ПРИМЕСИ НА ПРОЦЕСС ОЧИСТКИ СТЕБЕЛЬНЫХ КОРМОВ ОТ ИНОРОДНЫХ ТЕЛ
В статье раскрываются роль грубых стебельных кормов в скармливании крупного рогатого скота и основные проблемы их очистки от инородных примесей при приготовлении. Выявлены причины выхода из строя измельчителей или всей кормоприготовительной линии, нарушения графика кормления, сокращения привеса и надоя животных. Определены требования, предъявляемые к сепарирующим устройствам, и обоснована рациональная конструктивно-технологическая схема сепарирующего устройства с выбором основного объекта исследований – технологический процесс очистки грубых стебельных кормов от инородных твердых примесей пневмомеханическим сепарирующим устройством, новизна которого подтверждена патент на изобретение Республики Казахстан. Представлены результаты теоретических и экспериментальных исследований технологического процесса сепарирующего устройства, получены выражения для расчета его основных конструктивно-технологических и режимных параметров. Изучены и установлены степень влияния технологических свойств и параметров примеси на скорость их витания, что позволяет устанавливать интервалы изменения скорости воздушного потока и расхода воздуха в сепарирующем устройстве для качественной очистки грубых стебельных кормов от инородных примесей при наименьших энергозатратах.