Bang Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bang Zhou has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Hanqing Chen
Tianjin University
8 shared publications - Zhongke Gao
Tianjin University
8 shared publications - Mengyu Li
Tianjin University
7 shared publications - Zhiqiang Zhao
Tianjin University
7 shared publications - Ruiqi Wang
Tianjin University
6 shared publications - Jun Liu
Tianjin University
4 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (22) , 34868-34878
A Multiscale Attention–Depthwise Network for Microwave Water-Cut Soft Sensing in High-Water-Cut Oil–Water Flow
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (22) , 34868-34878
A Multiscale Attention–Depthwise Network for Microwave Water-Cut Soft Sensing in High-Water-Cut Oil–Water Flow
- 20 June 2026
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 181
Frequency-aware dual-stream attention network for oil–water multi-task prediction
- 20 June 2026
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 181
Frequency-aware dual-stream attention network for oil–water multi-task prediction
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Multiscale Cross-Channel Transformer for Parameter Measurement in Oil–Water Two-Phase Flow
The accurate measurement of water cut and total flow rate in oil–water two-phase flow is crucial for effective oilfield management, particularly in high water-cut environments. The inherent complexity of oil–water flows, characterized by diverse flow patterns and significant nonlinear behaviors, poses substantial challenges for traditional measurement techniques. To address these challenges, we propose a multiscale cross-channel transformer (MSCC-Transformer) model designed to analyze high-frequency signals collected by a double-helix microwave sensor (DHMS). The MSCC-Transformer employs cross-channel multiscale embedding (CCME) and multiscale multihead self-attention (MMHSA) mechanisms to capture intricate interchannel dependencies and extract both fine-grained and long-term features. Moreover, a global average pooling (GAP) layer is used to integrate multiscale information, enhancing feature representation and improving measurement accuracy. The experiment determined 1.3 GHz as the optimal operating frequency for the DHMS. Additionally, dynamic experiments show that the MSCC-Transformer significantly outperforms the existing time-series models in measuring water cut and total flow rate, demonstrating its robustness and accuracy.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Multiscale Cross-Channel Transformer for Parameter Measurement in Oil–Water Two-Phase Flow
The accurate measurement of water cut and total flow rate in oil–water two-phase flow is crucial for effective oilfield management, particularly in high water-cut environments. The inherent complexity of oil–water flows, characterized by diverse flow patterns and significant nonlinear behaviors, poses substantial challenges for traditional measurement techniques. To address these challenges, we propose a multiscale cross-channel transformer (MSCC-Transformer) model designed to analyze high-frequency signals collected by a double-helix microwave sensor (DHMS). The MSCC-Transformer employs cross-channel multiscale embedding (CCME) and multiscale multihead self-attention (MMHSA) mechanisms to capture intricate interchannel dependencies and extract both fine-grained and long-term features. Moreover, a global average pooling (GAP) layer is used to integrate multiscale information, enhancing feature representation and improving measurement accuracy. The experiment determined 1.3 GHz as the optimal operating frequency for the DHMS. Additionally, dynamic experiments show that the MSCC-Transformer significantly outperforms the existing time-series models in measuring water cut and total flow rate, demonstrating its robustness and accuracy.
- 25 June 2025
- Published by Elsevier in Expert Systems with Applications
- Vol. 295
LAPNet: A lightweight adaptive patch network for measuring water cut in oil-water two-phase flow
- 25 June 2025
- Published by Elsevier in Expert Systems with Applications
- Vol. 295
LAPNet: A lightweight adaptive patch network for measuring water cut in oil-water two-phase flow
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
APMNet-Based Water-Cut Prediction Using Dual-Helical Microwave Sensing
In industrial settings of high water-cut oil-water two-phase flow, accurately measuring wellhead parameters is essential for effective production monitoring and optimization in oilfields. The complexity of oil-water flow interactions and the limitations of current techniques pose significant challenges. We design a dual-helical microwave sensor, optimized through simulations for its structure and frequency. By integrating microwave transmission line technology with an innovative dual-helical design, the sensor enhances measurement stability and accuracy. Dynamic experiments are conducted to capture fluid signals under various conditions. We then propose an adaptive patch multi-feature fusion network (APMNet) for signal fusion and analysis. The dynamic patch module adjusts patch positions and sizes based on sequence variations, capturing more local changes and richer features, while the multi-feature fusion module integrates the features across the time, patch, and channel dimensions, effectively addressing issues of missing local features and noise interference. This approach achieves high-precision water cut prediction with a mean absolute percentage error (MAPE) of 2.08%. Comparative and ablation studies demonstrate the superior performance of our method in parameter prediction. Furthermore, field deployment in active oilfields confirms the practical effectiveness of the system in real-world applications.
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
APMNet-Based Water-Cut Prediction Using Dual-Helical Microwave Sensing
In industrial settings of high water-cut oil-water two-phase flow, accurately measuring wellhead parameters is essential for effective production monitoring and optimization in oilfields. The complexity of oil-water flow interactions and the limitations of current techniques pose significant challenges. We design a dual-helical microwave sensor, optimized through simulations for its structure and frequency. By integrating microwave transmission line technology with an innovative dual-helical design, the sensor enhances measurement stability and accuracy. Dynamic experiments are conducted to capture fluid signals under various conditions. We then propose an adaptive patch multi-feature fusion network (APMNet) for signal fusion and analysis. The dynamic patch module adjusts patch positions and sizes based on sequence variations, capturing more local changes and richer features, while the multi-feature fusion module integrates the features across the time, patch, and channel dimensions, effectively addressing issues of missing local features and noise interference. This approach achieves high-precision water cut prediction with a mean absolute percentage error (MAPE) of 2.08%. Comparative and ablation studies demonstrate the superior performance of our method in parameter prediction. Furthermore, field deployment in active oilfields confirms the practical effectiveness of the system in real-world applications.
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (11) , 20185-20194
Dual-Parameter Measurement of Oil–Water Two-Phase Flow Based on Multitask Learning
Oil–water two-phase flow is a common phenomenon in industrial processes. Precisely measuring its parameters is crucial for monitoring production conditions and optimizing production strategies. Due to the complexity of oil–water two-phase flow, the precise simultaneous measurements of water cut and total flow rate are challenging tasks. To address this issue, we conduct vertical upward oil–water two-phase flow experiments using a dual-helix microwave sensor measurement system to collect fluid signals and design a dual-parameter measurement model (DPMM) based on multi-task learning for the simultaneous prediction of water cut and total flow rate. Firstly, DPMM utilizes the shared feature extractor (SFE) to extract shared features, facilitating interaction across tasks. Then, DPMM employs the multi-head attention network (MHAN) and the expanding kernel network (EKN) to extract specific features for water cut and total flow rate, respectively. Furthermore, a joint loss function is used to achieve collaborative optimization. Experimental results show that DPMM demonstrates outstanding performance in two-parameter measurements and surpasses other competing models. We verified the efficiency of the proposed methods by parameter analysis and ablation experiments.
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (11) , 20185-20194
Dual-Parameter Measurement of Oil–Water Two-Phase Flow Based on Multitask Learning
Oil–water two-phase flow is a common phenomenon in industrial processes. Precisely measuring its parameters is crucial for monitoring production conditions and optimizing production strategies. Due to the complexity of oil–water two-phase flow, the precise simultaneous measurements of water cut and total flow rate are challenging tasks. To address this issue, we conduct vertical upward oil–water two-phase flow experiments using a dual-helix microwave sensor measurement system to collect fluid signals and design a dual-parameter measurement model (DPMM) based on multi-task learning for the simultaneous prediction of water cut and total flow rate. Firstly, DPMM utilizes the shared feature extractor (SFE) to extract shared features, facilitating interaction across tasks. Then, DPMM employs the multi-head attention network (MHAN) and the expanding kernel network (EKN) to extract specific features for water cut and total flow rate, respectively. Furthermore, a joint loss function is used to achieve collaborative optimization. Experimental results show that DPMM demonstrates outstanding performance in two-parameter measurements and surpasses other competing models. We verified the efficiency of the proposed methods by parameter analysis and ablation experiments.