Edwin Rivera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Edwin Rivera has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Oriana Avila
Optical Spectroscopy and Laser Research Group (GEL), Department of Physics, Universidad Popular del Cesar, Sabanas Campus, Diagonal 21 No. 29-56, Sabanas del Valle, Valledupar 200005, Cesar, Colombia
4 shared publications - Ruben Fonseca
Optical Spectroscopy and Laser Research Group (GEL), Department of Physics, Universidad Popular del Cesar, Sabanas Campus, Diagonal 21 No. 29-56, Sabanas del Valle, Valledupar 200005, Cesar, Colombia
4 shared publications - Holger Posada
Grupo de Espectroscopía Óptica y Láser, Universidad Popular del Cesar
2 shared publications - Oscar Leon Neira Bueno
Optical Spectroscopy and Laser Research Group (GEL), Department of Physics, Universidad Popular del Cesar, Sabanas Campus, Diagonal 21 No. 29-56, Sabanas del Valle, Valledupar 200005, Cesar, Colombia
2 shared publications - Romelio Jose Gonzalez Daza
Universidad Popular del César
2 shared publications - Ronal Andres Ceballo
Optical Spectroscopy and Laser Research Group (GEL), Department of Physics, Universidad Popular del Cesar, Sabanas Campus, Diagonal 21 No. 29-56, Sabanas del Valle, Valledupar 200005, Cesar, Colombia
2 shared publications
Latest Publications
- Open Access
- 17 March 2026
- Published by Brazilian Journals in Veredas do Direito
- Vol. 23 (5) , e235478
INTEGRATED MULTIPARAMETRIC MONITORING SYSTEM FOR THE ACQUISITION AND ANALYSIS OF BIOMEDICAL SIGNALS
This work presents the design and construction of a multiparametric biomedical signal monitoring system intended for the acquisition, visualization, and analysis of physiological variables. The proposed system integrates three main components: a sensing module, a data acquisition system, and a graphical user interface. The sensing module was designed to acquire electrocardiographic (ECG), phonocardiographic (PCG), respiratory, and body temperature signals using noninvasive sensors and appropriate signal conditioning stages. The acquired signals are digitized through an Arduino Uno–based acquisition system and transmitted to a computer for processing and visualization. A graphical user interface developed in LabVIEW enables real-time monitoring, waveform display, and parameter supervision in a user-friendly environment. The prototype also incorporates electrical isolation and patient safety considerations according to biomedical equipment standards. Experimental results demonstrate that the system is capable of reliably acquiring and displaying the physiological signals under study. The developed prototype represents a low-cost and portable alternative for biomedical monitoring applications, particularly in clinical and home-care environments.
- 17 March 2026
- Published by Brazilian Journals in Veredas do Direito
- Vol. 23 (5) , e235478
Open AccessINTEGRATED MULTIPARAMETRIC MONITORING SYSTEM FOR THE ACQUISITION AND ANALYSIS OF BIOMEDICAL SIGNALS
This work presents the design and construction of a multiparametric biomedical signal monitoring system intended for the acquisition, visualization, and analysis of physiological variables. The proposed system integrates three main components: a sensing module, a data acquisition system, and a graphical user interface. The sensing module was designed to acquire electrocardiographic (ECG), phonocardiographic (PCG), respiratory, and body temperature signals using noninvasive sensors and appropriate signal conditioning stages. The acquired signals are digitized through an Arduino Uno–based acquisition system and transmitted to a computer for processing and visualization. A graphical user interface developed in LabVIEW enables real-time monitoring, waveform display, and parameter supervision in a user-friendly environment. The prototype also incorporates electrical isolation and patient safety considerations according to biomedical equipment standards. Experimental results demonstrate that the system is capable of reliably acquiring and displaying the physiological signals under study. The developed prototype represents a low-cost and portable alternative for biomedical monitoring applications, particularly in clinical and home-care environments.
- Open Access
DFT-Based Design and Characterization of Organic Chromophores Based on Symmetric Thio-Bridge Quinoxaline Push–Pull (STQ-PP) for Solar Cells
Organic solar cells require molecular materials with broad absorption and proper energy-level alignment to maximize photon harvesting and charge transport; in this context, this work focuses on the computational design and characterization of π-conjugated push–pull chromophores, providing an integrated evaluation of their electronic, thermodynamic, and optoelectronic properties for photovoltaic applications. The chromophores were optimized using DFT/ b3lyp/6-31g+(d,p) in Gaussian16, incorporating solvation effects through the CPCM model. Electronic, thermodynamic, and optical properties were investigated using DFT and TD-DFT/CAM-B3LYP/6-311+G(d,p), including the calculation of absorption and emission spectra, first hyperpolarizability, and two-photon absorption. The STQ-PP chromophores exhibit differentiated optoelectronic responses, with DTTQ-DPP-1 showing an energy gap of 0.82–0.86 eV, stabilized LUMO levels between −2.50 and −2.61 eV, high electronic polarizability, and optical absorption extended beyond 800 nm, favoring the harvesting of low-energy photons, whereas DTTQ-DPP displays a gap close to 2.70 eV and absorption predominantly localized in the UV region, associated with potentially inferior photovoltaic performance. Compared with commercial donor materials, DTTQ-DPP-1 exhibits a red-shifted absorption into the NIR and a smaller gap, indicating enhanced low-energy photon capture; its structural stability and increased rigidity further support its photovoltaic viability.
Open AccessDFT-Based Design and Characterization of Organic Chromophores Based on Symmetric Thio-Bridge Quinoxaline Push–Pull (STQ-PP) for Solar Cells
Organic solar cells require molecular materials with broad absorption and proper energy-level alignment to maximize photon harvesting and charge transport; in this context, this work focuses on the computational design and characterization of π-conjugated push–pull chromophores, providing an integrated evaluation of their electronic, thermodynamic, and optoelectronic properties for photovoltaic applications. The chromophores were optimized using DFT/ b3lyp/6-31g+(d,p) in Gaussian16, incorporating solvation effects through the CPCM model. Electronic, thermodynamic, and optical properties were investigated using DFT and TD-DFT/CAM-B3LYP/6-311+G(d,p), including the calculation of absorption and emission spectra, first hyperpolarizability, and two-photon absorption. The STQ-PP chromophores exhibit differentiated optoelectronic responses, with DTTQ-DPP-1 showing an energy gap of 0.82–0.86 eV, stabilized LUMO levels between −2.50 and −2.61 eV, high electronic polarizability, and optical absorption extended beyond 800 nm, favoring the harvesting of low-energy photons, whereas DTTQ-DPP displays a gap close to 2.70 eV and absorption predominantly localized in the UV region, associated with potentially inferior photovoltaic performance. Compared with commercial donor materials, DTTQ-DPP-1 exhibits a red-shifted absorption into the NIR and a smaller gap, indicating enhanced low-energy photon capture; its structural stability and increased rigidity further support its photovoltaic viability.
- Open Access
- 2 February 2026
- Published by Brazilian Journals in Veredas do Direito
- Vol. 23 (4) , e234647
PRÁTICAS LÚDICAS NO ENSINO DE FRAÇÕES E A GARANTIA DO DIREITO À EDUCAÇÃO BÁSICA
O ensino de frações na educação básica constitui um desafio recorrente devido ao seu caráter abstrato e ao desinteresse que frequentemente desperta nos estudantes, o que impacta a aprendizagem significativa e a garantia do direito à educação básica. Nesse contexto, este artigo tem como objetivo analisar o efeito das práticas lúdicas na compreensão de frações por alunos do ensino fundamental. A pesquisa adotou uma abordagem quantitativa, com delineamento quase experimental, aplicada a estudantes colombianos do quarto ano. Inicialmente, foi aplicado um pré-teste, que evidenciou dificuldades especialmente no manejo de frações com mesmo denominador. Em seguida, foi desenvolvida uma intervenção pedagógica baseada em sete jogos didáticos, voltados à promoção da participação ativa e do raciocínio matemático. Ao final da intervenção, um pós-teste revelou melhora significativa na compreensão das frações, com mais de 80 % de respostas corretas, além de maior motivação e interesse dos estudantes. Os resultados indicam que a integração sistemática de práticas lúdicas em sala de aula favorece a aprendizagem de frações e se configura como uma estratégia pedagógica relevante para o fortalecimento do direito à educação básica.
- 2 February 2026
- Published by Brazilian Journals in Veredas do Direito
- Vol. 23 (4) , e234647
Open AccessPRÁTICAS LÚDICAS NO ENSINO DE FRAÇÕES E A GARANTIA DO DIREITO À EDUCAÇÃO BÁSICA
O ensino de frações na educação básica constitui um desafio recorrente devido ao seu caráter abstrato e ao desinteresse que frequentemente desperta nos estudantes, o que impacta a aprendizagem significativa e a garantia do direito à educação básica. Nesse contexto, este artigo tem como objetivo analisar o efeito das práticas lúdicas na compreensão de frações por alunos do ensino fundamental. A pesquisa adotou uma abordagem quantitativa, com delineamento quase experimental, aplicada a estudantes colombianos do quarto ano. Inicialmente, foi aplicado um pré-teste, que evidenciou dificuldades especialmente no manejo de frações com mesmo denominador. Em seguida, foi desenvolvida uma intervenção pedagógica baseada em sete jogos didáticos, voltados à promoção da participação ativa e do raciocínio matemático. Ao final da intervenção, um pós-teste revelou melhora significativa na compreensão das frações, com mais de 80 % de respostas corretas, além de maior motivação e interesse dos estudantes. Os resultados indicam que a integração sistemática de práticas lúdicas em sala de aula favorece a aprendizagem de frações e se configura como uma estratégia pedagógica relevante para o fortalecimento do direito à educação básica.
- Open Access
Functionalized Benzoxazole–Pyrimidine Derivatives for Deep Bioimaging: A DFT Study of Molecular Architecture and One- and Two-Photon Absorption
This study investigates how different substituents modulate the electronic structure and optical properties of seven derivatives of Pyrimidine-benzoxazole (FB.01) in DMSO, aiming to optimize their performance as deep bioimaging probes. The π-conjugated FB.01 core was functionalized with methyl, phenyl, N-oxide, exocyclic phenyl, carboxyl, N(OH)2, and pyridine. Geometry optimizations were performed using DFT (B3LYP/6-311+G(d,p) with SMD), followed by analysis of frontier orbitals, electronegativity, hardness, and total energy. TD-DFT and the Sum-Over-States approach simulated molar absorptivity spectra and two-photon absorption cross-sections. Results show that minor torsions influence optical responses: the FB.01 skeleton remains nearly planar, though substituents alter π-overlap and shift the LUMO, while the HOMO stays at −7.65 eV. N-oxide and carboxyl groups stabilize the LUMO, narrowing the energy gap (down to 5.20 eV in FB.04 and 6.07 eV in FB.06), whereas methyl widens it (6.38 eV). All compounds preserve a strong UV-band; conjugation increases absorptivity, and FB.04 exhibits a 31 nm red-shift. TPA grows with conjugation and peaks dramatically in FB.04 (23 GM), surpassing other derivatives. These findings highlight three design principles: strong acceptors like N-oxide effectively lower the LUMO and enhance TPA; additional aromatic rings boost one-photon absorption; and carboxyl or N(OH)2 groups finely tune polarity without disrupting planarity.
Open AccessFunctionalized Benzoxazole–Pyrimidine Derivatives for Deep Bioimaging: A DFT Study of Molecular Architecture and One- and Two-Photon Absorption
This study investigates how different substituents modulate the electronic structure and optical properties of seven derivatives of Pyrimidine-benzoxazole (FB.01) in DMSO, aiming to optimize their performance as deep bioimaging probes. The π-conjugated FB.01 core was functionalized with methyl, phenyl, N-oxide, exocyclic phenyl, carboxyl, N(OH)2, and pyridine. Geometry optimizations were performed using DFT (B3LYP/6-311+G(d,p) with SMD), followed by analysis of frontier orbitals, electronegativity, hardness, and total energy. TD-DFT and the Sum-Over-States approach simulated molar absorptivity spectra and two-photon absorption cross-sections. Results show that minor torsions influence optical responses: the FB.01 skeleton remains nearly planar, though substituents alter π-overlap and shift the LUMO, while the HOMO stays at −7.65 eV. N-oxide and carboxyl groups stabilize the LUMO, narrowing the energy gap (down to 5.20 eV in FB.04 and 6.07 eV in FB.06), whereas methyl widens it (6.38 eV). All compounds preserve a strong UV-band; conjugation increases absorptivity, and FB.04 exhibits a 31 nm red-shift. TPA grows with conjugation and peaks dramatically in FB.04 (23 GM), surpassing other derivatives. These findings highlight three design principles: strong acceptors like N-oxide effectively lower the LUMO and enhance TPA; additional aromatic rings boost one-photon absorption; and carboxyl or N(OH)2 groups finely tune polarity without disrupting planarity.
- Open Access
- 26 January 2026
- Published by Brazilian Journals in Veredas do Direito
- Vol. 23 (3) , e234390
PRÁCTICAS FINANCIERAS Y COMPETITIVIDAD EN PYMES DEL SECTOR COMERCIAL DE VALLEDUPAR
Este estudio cuantitativo-correlacional analizó 181 pymes comerciales de Valledupar (2022-2025) para determinar cómo sus prácticas financieras, factores internos y externos inciden en la competitividad. Se aplicaron cuestionarios, fichas documentales y entrevistas, complementados con ANOVA, regresión múltiple y k-means. El modelo explicó 58 % de la varianza del índice compuesto de competitividad: la digitalización (β = 0,43) y las horas de capacitación (β = 0,29) fueron los impulsores principales, mientras la deuda-patrimonio elevada y los ciclos de conversión largos la redujeron significativamente. Tres tipologías emergieron: gestión conservadora (45 %), mixta (31 %) y expansiva (24 %), las dos últimas asociadas a mayores márgenes y crecimiento. La inflación y las tasas de interés dañaron la rentabilidad, pero el comercio electrónico atenuó ese efecto. Los riesgos críticos identificados incluyen variabilidad cambiaria, volatilidad de liquidez y mora de cartera. Se recomienda digitalizar procesos, profesionalizar talento, optimizar capital de trabajo y adoptar coberturas cambiarias para pasar de estrategias conservadoras a mixtas o expansivas.
- 26 January 2026
- Published by Brazilian Journals in Veredas do Direito
- Vol. 23 (3) , e234390
Open AccessPRÁCTICAS FINANCIERAS Y COMPETITIVIDAD EN PYMES DEL SECTOR COMERCIAL DE VALLEDUPAR
Este estudio cuantitativo-correlacional analizó 181 pymes comerciales de Valledupar (2022-2025) para determinar cómo sus prácticas financieras, factores internos y externos inciden en la competitividad. Se aplicaron cuestionarios, fichas documentales y entrevistas, complementados con ANOVA, regresión múltiple y k-means. El modelo explicó 58 % de la varianza del índice compuesto de competitividad: la digitalización (β = 0,43) y las horas de capacitación (β = 0,29) fueron los impulsores principales, mientras la deuda-patrimonio elevada y los ciclos de conversión largos la redujeron significativamente. Tres tipologías emergieron: gestión conservadora (45 %), mixta (31 %) y expansiva (24 %), las dos últimas asociadas a mayores márgenes y crecimiento. La inflación y las tasas de interés dañaron la rentabilidad, pero el comercio electrónico atenuó ese efecto. Los riesgos críticos identificados incluyen variabilidad cambiaria, volatilidad de liquidez y mora de cartera. Se recomienda digitalizar procesos, profesionalizar talento, optimizar capital de trabajo y adoptar coberturas cambiarias para pasar de estrategias conservadoras a mixtas o expansivas.
- Open Access
DFT Study of Functionalized Benzoxazole-Based D–π–A Architectures: Influence of Ionic Fragments on Optical Properties and Their Potential in OLED and Solar Cell Devices
This theoretical work investigates the linear (absorption and emission) and nonlinear (first hyperpolarizability and TPA) optical properties of donor––acceptor (D––A) molecular architectures based on functionalized benzoxazoles, with potential applications in optoelectronic technologies such as OLEDs and solar cells. Four -conjugated compounds were studied in the gas phase and in polar (methanol) and nonpolar (toluene) solvents, employing DFT with the B3LYP and CAM-B3LYP functionals and the 6-311++G(d,p) basis set, as implemented in Gaussian and Dalton. The results reveal that the chemical environment induces spectral shifts and modulates the intensity of electronic transitions. In particular, the compound 2-((4-((5-nitro-2-oxo-1,3-benzoxazol-3(2H)-yl)amino)phenyl)methyl)-1,3-benzoxazole exhibited outstanding behavior in methanol, with a significant increase in dipole moment, polarizability, and first hyperpolarizability (static and dynamic at 1064 nm), reaching a TPA cross-section close to 150 GM. These findings highlight the key role of ionic substituents in tuning the optical response of -conjugated systems and underscore their potential as functional materials for high-performance light-emitting and energy-conversion devices.Open AccessDFT Study of Functionalized Benzoxazole-Based D–π–A Architectures: Influence of Ionic Fragments on Optical Properties and Their Potential in OLED and Solar Cell Devices
This theoretical work investigates the linear (absorption and emission) and nonlinear (first hyperpolarizability and TPA) optical properties of donor––acceptor (D––A) molecular architectures based on functionalized benzoxazoles, with potential applications in optoelectronic technologies such as OLEDs and solar cells. Four -conjugated compounds were studied in the gas phase and in polar (methanol) and nonpolar (toluene) solvents, employing DFT with the B3LYP and CAM-B3LYP functionals and the 6-311++G(d,p) basis set, as implemented in Gaussian and Dalton. The results reveal that the chemical environment induces spectral shifts and modulates the intensity of electronic transitions. In particular, the compound 2-((4-((5-nitro-2-oxo-1,3-benzoxazol-3(2H)-yl)amino)phenyl)methyl)-1,3-benzoxazole exhibited outstanding behavior in methanol, with a significant increase in dipole moment, polarizability, and first hyperpolarizability (static and dynamic at 1064 nm), reaching a TPA cross-section close to 150 GM. These findings highlight the key role of ionic substituents in tuning the optical response of -conjugated systems and underscore their potential as functional materials for high-performance light-emitting and energy-conversion devices. - Open Access
- 23 July 2024
- Published by Springer Nature in Research Square
DFT Study of the Influence of Cationic and Anionic Fragments on the Linear Optical Properties, First Hyperpolarizability, and Two-Photon Absorption of Benzoxazole Derivatives: A Perspective for OLEDs and Solar Cells Applications
This theoretical study presents the linear optical properties of absorption and fluorescence, as well as the nonlinear properties of first hyperpolarizability and two-photon absorption (TPA), in pi-conjugated organic compounds. Four pi-conjugated organic compounds derived from Benzoxazole were examined in the gas phase, in methanol, and in toluene, within the framework of Computational Quantum Chemistry, employing Density Functional Theory (DFT) with the CAM-B3LYP functional and the 6-311 + + G(d,p) basis set. The results reveal notable variations in the absorption and fluorescence spectra of organic compounds in the gas phase and in solvents such as methanol and toluene. In the gas phase, UV-violet peaks are observed, whereas in solvents, these peaks shift towards longer wavelengths, highlighting the influence of the chemical environment. Toluene intensifies absorption peaks, while methanol enhances fluorescence peaks, especially in compounds with a push-pull effect, such as Compound 4. Additionally, a significant increase in dipole moment, polarizability, and static and dynamic first hyperpolarizability for 1064 nm is evidenced in solvents, suggesting a greater nonlinear optical response capability of the compounds. The compounds exhibit maximum two-photon absorption (2PA) cross-sections that increase in solvents, especially in methanol, where Compound 4 reaches approximately 150 GM. Finally, Compound 4 in methanol and toluene offers better optical characteristics for use in OLED devices.
- 23 July 2024
- Published by Springer Nature in Research Square
Open AccessDFT Study of the Influence of Cationic and Anionic Fragments on the Linear Optical Properties, First Hyperpolarizability, and Two-Photon Absorption of Benzoxazole Derivatives: A Perspective for OLEDs and Solar Cells Applications
This theoretical study presents the linear optical properties of absorption and fluorescence, as well as the nonlinear properties of first hyperpolarizability and two-photon absorption (TPA), in pi-conjugated organic compounds. Four pi-conjugated organic compounds derived from Benzoxazole were examined in the gas phase, in methanol, and in toluene, within the framework of Computational Quantum Chemistry, employing Density Functional Theory (DFT) with the CAM-B3LYP functional and the 6-311 + + G(d,p) basis set. The results reveal notable variations in the absorption and fluorescence spectra of organic compounds in the gas phase and in solvents such as methanol and toluene. In the gas phase, UV-violet peaks are observed, whereas in solvents, these peaks shift towards longer wavelengths, highlighting the influence of the chemical environment. Toluene intensifies absorption peaks, while methanol enhances fluorescence peaks, especially in compounds with a push-pull effect, such as Compound 4. Additionally, a significant increase in dipole moment, polarizability, and static and dynamic first hyperpolarizability for 1064 nm is evidenced in solvents, suggesting a greater nonlinear optical response capability of the compounds. The compounds exhibit maximum two-photon absorption (2PA) cross-sections that increase in solvents, especially in methanol, where Compound 4 reaches approximately 150 GM. Finally, Compound 4 in methanol and toluene offers better optical characteristics for use in OLED devices.