Ligia Espoliar Corrêa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ligia Espoliar Corrêa has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Alberto de Souza Costa
Universidade Estadual Paulista, Brasil
3 shared publications - Diana Gabriela Soares
Universidade de São Paulo, Brasil
3 shared publications - Isabela Sanches Pompeo da Silva
Department of Operative Dentistry, Endodontics, and Dental Materials, University of São Paulo - USP, Bauru School of Dentistry, Alameda Doutor Octávio Pinheiro Brisolla, 9-75, Bauru, SP, Brazil
3 shared publications - Camila Correa da Silva Braga de Melo
Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of São Paulo (USP), Bauru, São Paulo, Brazil
2 shared publications - Erika Soares Bronze-Uhle
Department of Operative Dentistry, Endodontics, and Dental Materials, University of São Paulo - USP, Bauru School of Dentistry, Alameda Doutor Octávio Pinheiro Brisolla, 9-75, Bauru, SP, Brazil
2 shared publications - Ester Alves Ferreira Bordini
Universidade de São Paulo, Brasil
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in BioMed Research International
- Vol. 2026 (1) , e5774660
Functionalization of Photocrosslinkable GelMA Hydrogel With Metal Oxides for Direct Pulp Capping
Aim: In this study, a photocrosslinkable methacrylated gelatin (GelMA) hydrogel, functionalized with metal oxide nanoparticles, was developed to support dentin regeneration in direct pulp capping applications. Magnesium (MgO), silicon (SiO 2 ), strontium (SrO), and zinc (ZnO) were incorporated into GelMA at concentrations of 0.1%, 0.2%, 0.3%, 0.5%, and 1% (v/v) to assess cytotoxicity in human stem cells from the apical papilla (SCAPs). Based on the results, MgO, SiO 2 , and SrO were selected for further functionalization of GelMA at reduced concentrations (0.1%, 0.075%, 0.05%, and 0.025%; v/v) to evaluate the odontogenic potential of the formulations. Physicochemical analyses were performed to characterize the biomaterials. ZnO exhibited cytotoxicity at all tested concentrations. In contrast, the other oxides demonstrated excellent bioactivity and enhanced cell proliferation, except for SrO 0.025%. A significant increase in alkaline phosphatase (ALP) activity and mineralized matrix deposition was observed across all groups, with the most pronounced effects seen in MgO 0.05%, MgO 0.025%, and SrO 0.075%. The functionalized hydrogels exhibited a porous microstructure with a slow and controlled release of oxide‐derived species over 14 days. FTIR analysis confirmed the complexation of Mg 2+ , Si 4+ , and Sr 2+ ions within the GelMA structure. In conclusion, our results demonstrate that GelMA functionalized with MgO 0.05%, SiO 2 , and SrO 0.075% enhances odontoblastic differentiation and promotes reparative mineralized matrix deposition under osteogenic conditions, favoring reparative dentinogenesis. These findings highlight the promising potential of this biomaterial for future applications in direct pulp capping procedures.
- 1 January 2026
- Published by Wiley in BioMed Research International
- Vol. 2026 (1) , e5774660
Open AccessFunctionalization of Photocrosslinkable GelMA Hydrogel With Metal Oxides for Direct Pulp Capping
Aim: In this study, a photocrosslinkable methacrylated gelatin (GelMA) hydrogel, functionalized with metal oxide nanoparticles, was developed to support dentin regeneration in direct pulp capping applications. Magnesium (MgO), silicon (SiO 2 ), strontium (SrO), and zinc (ZnO) were incorporated into GelMA at concentrations of 0.1%, 0.2%, 0.3%, 0.5%, and 1% (v/v) to assess cytotoxicity in human stem cells from the apical papilla (SCAPs). Based on the results, MgO, SiO 2 , and SrO were selected for further functionalization of GelMA at reduced concentrations (0.1%, 0.075%, 0.05%, and 0.025%; v/v) to evaluate the odontogenic potential of the formulations. Physicochemical analyses were performed to characterize the biomaterials. ZnO exhibited cytotoxicity at all tested concentrations. In contrast, the other oxides demonstrated excellent bioactivity and enhanced cell proliferation, except for SrO 0.025%. A significant increase in alkaline phosphatase (ALP) activity and mineralized matrix deposition was observed across all groups, with the most pronounced effects seen in MgO 0.05%, MgO 0.025%, and SrO 0.075%. The functionalized hydrogels exhibited a porous microstructure with a slow and controlled release of oxide‐derived species over 14 days. FTIR analysis confirmed the complexation of Mg 2+ , Si 4+ , and Sr 2+ ions within the GelMA structure. In conclusion, our results demonstrate that GelMA functionalized with MgO 0.05%, SiO 2 , and SrO 0.075% enhances odontoblastic differentiation and promotes reparative mineralized matrix deposition under osteogenic conditions, favoring reparative dentinogenesis. These findings highlight the promising potential of this biomaterial for future applications in direct pulp capping procedures.
- 1 July 2025
- Published by American Vacuum Society in Biointerphases
- Vol. 20 (4)
Enhanced collagenogenesis on three-dimensionally printed titanium surfaces by human gingival fibroblasts: An in vitro study
The lack of cementum in peri-implant tissues leads to a deficiency in anchorage points for gingival collagen fibers. This arrangement is linked to reduced protective capabilities compared to teeth. Therefore, there is a pressing need to develop surfaces that optimize the interaction between soft tissue and implants. 3D-printed titanium disks (Ti3DP), machined disks (TiMC), and glass coverslips (GS) were seeded with human gingival fibroblasts. These specimens underwent mechanical characterization via roughness and wettability assays. Biological characterization included assessments of cellular viability (live/dead), adhesion and spreading (F-actin), cell count (DAPI), cellular metabolism (Alamar blue), adhesive strength, and soluble collagen and total protein quantification up to 14 days. Data analysis employed Student’s t-test and ANOVA post-hoc Tukey test (α = 0.05). The group TiMC exhibited higher hydrophilicity and lower roughness compared to Ti3DP. All groups demonstrated cellular viability throughout the study period. Adhesive strength did not significantly differ among groups; however, cell count was higher in TiMC and GS after one day of cell seeding in comparison to Ti3DP. Morphologically, GS and TiMC displayed more fusiform cells with a uniform distribution, while Ti3DP showed smaller, irregular cells with multiple lamellipodia and filopodia. Additionally, statistically superior collagen and total protein deposition was observed in Ti3DP (p < 0.01). The 3D-printed titanium surface allowed human gingival fibroblasts to adhere to it, leading to a 3D cytoskeleton morphology that culminated in increased collagen expression. Therefore, these 3D-printed devices present a promising avenue for producing transmucosal components due to their increase in collagen production.
- 1 July 2025
- Published by American Vacuum Society in Biointerphases
- Vol. 20 (4)
Enhanced collagenogenesis on three-dimensionally printed titanium surfaces by human gingival fibroblasts: An in vitro study
The lack of cementum in peri-implant tissues leads to a deficiency in anchorage points for gingival collagen fibers. This arrangement is linked to reduced protective capabilities compared to teeth. Therefore, there is a pressing need to develop surfaces that optimize the interaction between soft tissue and implants. 3D-printed titanium disks (Ti3DP), machined disks (TiMC), and glass coverslips (GS) were seeded with human gingival fibroblasts. These specimens underwent mechanical characterization via roughness and wettability assays. Biological characterization included assessments of cellular viability (live/dead), adhesion and spreading (F-actin), cell count (DAPI), cellular metabolism (Alamar blue), adhesive strength, and soluble collagen and total protein quantification up to 14 days. Data analysis employed Student’s t-test and ANOVA post-hoc Tukey test (α = 0.05). The group TiMC exhibited higher hydrophilicity and lower roughness compared to Ti3DP. All groups demonstrated cellular viability throughout the study period. Adhesive strength did not significantly differ among groups; however, cell count was higher in TiMC and GS after one day of cell seeding in comparison to Ti3DP. Morphologically, GS and TiMC displayed more fusiform cells with a uniform distribution, while Ti3DP showed smaller, irregular cells with multiple lamellipodia and filopodia. Additionally, statistically superior collagen and total protein deposition was observed in Ti3DP (p < 0.01). The 3D-printed titanium surface allowed human gingival fibroblasts to adhere to it, leading to a 3D cytoskeleton morphology that culminated in increased collagen expression. Therefore, these 3D-printed devices present a promising avenue for producing transmucosal components due to their increase in collagen production.
- Open Access
- 5 May 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (32)
Simvastatin‐Release Photocurable Hydrogel With Microsphere Delivery System for Improved Dental Applications
The development of multifunctional injectable biomaterials that serve as frameworks for tissue neo‐deposition and promote dentin regeneration through resident dental pulp cells represents an innovative approach in regenerative dentistry. This study presents an injectable system based on a photocrosslinkable hydrogel, functionalized with a drug release system to deliver bioactive doses of the biomineralizing drug simvastatin. Chitosan microspheres (MSCH) loaded with 2%, 5%, or 10% simvastatin (MSCHSV) were prepared and incorporated into gelatin methacryloyl (GelMA) to create a hybrid hydrogel activated by LED light. Characterizations, including Fourier transform infrared (FTIR), scanning electron microscopy (SEM), pore size, porosity, and swelling capacity, confirmed the inclusion of particles and creation of a 3D biomaterial. The inclusion of microspheres did not alter the hydrogel's degradability under enzymatic action. Biostimulation of human dental pulp cells (HDPCs) on the hydrogel was evaluated through cell viability and mineralized matrix assays. Results showed no cytotoxic effects, with significant cell proliferation over time. HDPCs displayed an increase in mineralization nodules when cultured with GelMA functionalized with MSCH containing 2%, 5%, and 10% simvastatin. However, only the 10% concentration resulted in a significant increase. Thus, incorporating chitosan microspheres with 10% simvastatin into GelMA creates a controlled release system with high potential for direct pulp capping.
- 5 May 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (32)
Open AccessSimvastatin‐Release Photocurable Hydrogel With Microsphere Delivery System for Improved Dental Applications
The development of multifunctional injectable biomaterials that serve as frameworks for tissue neo‐deposition and promote dentin regeneration through resident dental pulp cells represents an innovative approach in regenerative dentistry. This study presents an injectable system based on a photocrosslinkable hydrogel, functionalized with a drug release system to deliver bioactive doses of the biomineralizing drug simvastatin. Chitosan microspheres (MSCH) loaded with 2%, 5%, or 10% simvastatin (MSCHSV) were prepared and incorporated into gelatin methacryloyl (GelMA) to create a hybrid hydrogel activated by LED light. Characterizations, including Fourier transform infrared (FTIR), scanning electron microscopy (SEM), pore size, porosity, and swelling capacity, confirmed the inclusion of particles and creation of a 3D biomaterial. The inclusion of microspheres did not alter the hydrogel's degradability under enzymatic action. Biostimulation of human dental pulp cells (HDPCs) on the hydrogel was evaluated through cell viability and mineralized matrix assays. Results showed no cytotoxic effects, with significant cell proliferation over time. HDPCs displayed an increase in mineralization nodules when cultured with GelMA functionalized with MSCH containing 2%, 5%, and 10% simvastatin. However, only the 10% concentration resulted in a significant increase. Thus, incorporating chitosan microspheres with 10% simvastatin into GelMA creates a controlled release system with high potential for direct pulp capping.