Anika Tabassum Promi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anika Tabassum Promi has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Feng Lin
Department of Chemistry, Virginia Tech, Blacksburg, Virginia 24061, United States of America
4 shared publications Dennis Nordlund
SLAC National Accelerator Laboratory
3 shared publicationsCallum Connor
Brown University
2 shared publicationsChengjun Sun
X-ray Science Division
2 shared publications- Jianming Bai
Brookhaven National Laboratory
2 shared publications Afolabi Uthmon Olayiwola
Department of Chemistry, Virginia Tech, Blacksburg, Virginia, 24061, USA
1 shared publication
Latest Publications
- Open Access
- 27 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (44) , 29856-29868
Sulfur-Induced Local Structure Reconstruction and Weak Na–Anion Interactions Enable Fast Na+ Transport in x Na2S-TaCl5 Electrolytes
Amorphous solid electrolytes offer opportunities for fast ion transport, yet the structural origins governing their performance remain difficult to resolve due to the absence of long-range order. While mixed-anion strategies have recently emerged to improve ion transport in sodium halide electrolytes, how sulfur incorporation modifies the local structure and Na+ transport remains poorly understood. Here, we develop a series of xNa2S-TaCl5 mixed anion solid electrolytes to elucidate the impact of sulfur on the structure and Na+ transport. Structural analyses reveal that sulfur incorporation reconstructs the connectivity of Ta-centered polyhedra while progressively disrupting the long-range crystalline ordering to form an amorphous framework. More importantly, neutron pair distribution function analysis reveals the sulfur-induced reconstruction of the local Ta-centered structure, with the emergence of coexisting edge-sharing- and corner-sharing-like motifs from the isolated polyhedra in crystalline NaTaCl6. Simulations further show that sulfur shifts the local polyhedral connectivity toward a larger proportion of edge-sharing configurations relative to the O-containing analogue. Matched-composition machine-learning molecular dynamics (MLMD) comparing O- and S-containing amorphous models suggest that sulfur weakens Na-anion binding, shortens Na–anion residence times, and lowers the barrier for Na+ migration relative to the O analogue. As a result, the optimized composition achieves a high room-temperature ionic conductivity of 3.25 mS cm–1 with a low activation energy of 0.28 eV. When evaluated in all-solid-state sodium batteries with an uncoated NaNi1/3Mn1/3Fe1/3O2 cathode, the cell delivers a discharge capacity of 112 mAh g–1 after 100 cycles (82.6% retention) with a high average Coulombic efficiency of 99.8%, demonstrating stable interfacial compatibility with uncoated layered oxide cathodes.
- 27 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (44) , 29856-29868
Open AccessSulfur-Induced Local Structure Reconstruction and Weak Na–Anion Interactions Enable Fast Na+ Transport in x Na2S-TaCl5 Electrolytes
Amorphous solid electrolytes offer opportunities for fast ion transport, yet the structural origins governing their performance remain difficult to resolve due to the absence of long-range order. While mixed-anion strategies have recently emerged to improve ion transport in sodium halide electrolytes, how sulfur incorporation modifies the local structure and Na+ transport remains poorly understood. Here, we develop a series of xNa2S-TaCl5 mixed anion solid electrolytes to elucidate the impact of sulfur on the structure and Na+ transport. Structural analyses reveal that sulfur incorporation reconstructs the connectivity of Ta-centered polyhedra while progressively disrupting the long-range crystalline ordering to form an amorphous framework. More importantly, neutron pair distribution function analysis reveals the sulfur-induced reconstruction of the local Ta-centered structure, with the emergence of coexisting edge-sharing- and corner-sharing-like motifs from the isolated polyhedra in crystalline NaTaCl6. Simulations further show that sulfur shifts the local polyhedral connectivity toward a larger proportion of edge-sharing configurations relative to the O-containing analogue. Matched-composition machine-learning molecular dynamics (MLMD) comparing O- and S-containing amorphous models suggest that sulfur weakens Na-anion binding, shortens Na–anion residence times, and lowers the barrier for Na+ migration relative to the O analogue. As a result, the optimized composition achieves a high room-temperature ionic conductivity of 3.25 mS cm–1 with a low activation energy of 0.28 eV. When evaluated in all-solid-state sodium batteries with an uncoated NaNi1/3Mn1/3Fe1/3O2 cathode, the cell delivers a discharge capacity of 112 mAh g–1 after 100 cycles (82.6% retention) with a high average Coulombic efficiency of 99.8%, demonstrating stable interfacial compatibility with uncoated layered oxide cathodes.
- Open Access
- 21 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (43) , 46666-46676
Fluorine-Mediated Molten-Salt Crystallization Regulates Phase Evolution and Structural Stability in Sodium Layered Oxides
Ni- and Co-free P2-type Fe–Mn layered oxides with high Na concentrations are promising cathodes for sodium-ion batteries, but their practical use is limited by phase instability during Na-excess synthesis and structural degradation during cycling and storage. Although large single-crystal-like architectures could improve stability, controlled phase-selective crystallization in these cathode systems remains challenging. Here, we show that fluorine-assisted molten-salt synthesis enables controlled formation of large-particle Fe–Mn–Ti P2 cathodes with enhanced phase selectivity and structural coherence. Compared with Na-excess processing alone, NaF-assisted flux growth expands the P2 phase stability window and promotes large particles with uniform morphologies while preserving local layered ordering. Multiscale characterization further reveals more-reversible structural evolution and more homogeneous Mn redox behavior in the NaF-assisted material, together with a gradient-like fluorine distribution involving surface-enriched NaF-like species and lower level interior fluorine environments. These coupled structural, morphological, and chemical features collectively mitigate crack formation and deliver good cycling stability. In summary, NaF-assisted molten-salt synthesis shows promise in addressing key limitations of Ni- and Co-free P2-type Fe–Mn layered cathodes.
- 21 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (43) , 46666-46676
Open AccessFluorine-Mediated Molten-Salt Crystallization Regulates Phase Evolution and Structural Stability in Sodium Layered Oxides
Ni- and Co-free P2-type Fe–Mn layered oxides with high Na concentrations are promising cathodes for sodium-ion batteries, but their practical use is limited by phase instability during Na-excess synthesis and structural degradation during cycling and storage. Although large single-crystal-like architectures could improve stability, controlled phase-selective crystallization in these cathode systems remains challenging. Here, we show that fluorine-assisted molten-salt synthesis enables controlled formation of large-particle Fe–Mn–Ti P2 cathodes with enhanced phase selectivity and structural coherence. Compared with Na-excess processing alone, NaF-assisted flux growth expands the P2 phase stability window and promotes large particles with uniform morphologies while preserving local layered ordering. Multiscale characterization further reveals more-reversible structural evolution and more homogeneous Mn redox behavior in the NaF-assisted material, together with a gradient-like fluorine distribution involving surface-enriched NaF-like species and lower level interior fluorine environments. These coupled structural, morphological, and chemical features collectively mitigate crack formation and deliver good cycling stability. In summary, NaF-assisted molten-salt synthesis shows promise in addressing key limitations of Ni- and Co-free P2-type Fe–Mn layered cathodes.
- 18 February 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (4) , 040506
Structural and Morphological Control of Spherical NFM333 Precursors for Na-Ion Batteries: A Comparative Study of Ammonia- and Citrate-Based Coprecipitation Routes
Morphology control is a key design parameter for sodium-ion layered oxide cathodes, yet achieving uniform precursors with balanced stoichiometry is more challenging than in lithium-ion systems due to the broader range of transition-metal chemistries involved. These complexities highlight the need for systematic comparisons of coprecipitation routes tailored to sodium-ion compositions. Here, we examine how ammonia- and citrate-based coprecipitation methods shape the morphology and composition of equimolar Ni–Fe–Mn hydroxide and oxyhydroxide precursors. We investigate how pH, ligand concentration, and temperature jointly influence precipitation onset, particle shape, and metal incorporation. In the ammonia system, precipitation proceeds readily between pH 10.5–11.5, with pH ≈ 11.0 yielding the most uniform morphology and target Ni:Fe:Mn ≈ 1:1:1 stoichiometry. Higher ammonia levels improve morphology but above ∼1.0 M begin to delay Ni incorporation and introduce phase separation. In contrast, the citrate system shows delayed precipitation (threshold pH ≈ 11.8) but forms dense granular microspheres with narrow size distributions across 0.1–0.6 M citrate, with Fe enrichment emerging at higher ligand concentrations. X-ray diffraction reveals β -Ni(OH) 2 -type hydroxides for ammonia-derived precursors and δ -FeOOH-type oxyhydroxides for citrate-derived ones. Together, these results provide practical guidance for tailoring precursor morphology and composition in Fe- and Mn-rich sodium-ion cathode materials.
- 18 February 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (4) , 040506
Structural and Morphological Control of Spherical NFM333 Precursors for Na-Ion Batteries: A Comparative Study of Ammonia- and Citrate-Based Coprecipitation Routes
Morphology control is a key design parameter for sodium-ion layered oxide cathodes, yet achieving uniform precursors with balanced stoichiometry is more challenging than in lithium-ion systems due to the broader range of transition-metal chemistries involved. These complexities highlight the need for systematic comparisons of coprecipitation routes tailored to sodium-ion compositions. Here, we examine how ammonia- and citrate-based coprecipitation methods shape the morphology and composition of equimolar Ni–Fe–Mn hydroxide and oxyhydroxide precursors. We investigate how pH, ligand concentration, and temperature jointly influence precipitation onset, particle shape, and metal incorporation. In the ammonia system, precipitation proceeds readily between pH 10.5–11.5, with pH ≈ 11.0 yielding the most uniform morphology and target Ni:Fe:Mn ≈ 1:1:1 stoichiometry. Higher ammonia levels improve morphology but above ∼1.0 M begin to delay Ni incorporation and introduce phase separation. In contrast, the citrate system shows delayed precipitation (threshold pH ≈ 11.8) but forms dense granular microspheres with narrow size distributions across 0.1–0.6 M citrate, with Fe enrichment emerging at higher ligand concentrations. X-ray diffraction reveals β -Ni(OH) 2 -type hydroxides for ammonia-derived precursors and δ -FeOOH-type oxyhydroxides for citrate-derived ones. Together, these results provide practical guidance for tailoring precursor morphology and composition in Fe- and Mn-rich sodium-ion cathode materials.
- 16 January 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (3) , 1315-1324
Spatiotemporal and Statistical Mapping of Transition Metal Equilibria in Alkaline Media
- 16 January 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (3) , 1315-1324
Spatiotemporal and Statistical Mapping of Transition Metal Equilibria in Alkaline Media
- Open Access
- 12 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (22) , 17063-17074
Elucidating the phase transformations and grain growth behavior of O3-type sodium-ion layered oxide cathode materials during high temperature synthesis
Understanding the formation mechanism of layered oxide cathodes via solid-state synthesis is imperative to achieving controllability over their materials properties and electrochemical behaviors. In this work, we investigate the phase and microstructure evolution during the synthesis of NaNi1/3Fe1/3Mn1/3O2, a model sodium-ion layered oxide cathode, using a combination of imaging, diffraction, and spectroscopic techniques. We unravel the synthetic mechanistic pathways involved in the high-temperature calcination reaction, as well as elaborate the synthesis-microstructure-performance relationship of this material. The formation of the final layered oxide phase involves a gradual transformation through a sodiated oxyhydroxide intermediate. During the reaction, the precursor dehydration reaction dominates at 250–550 °C, while the major sodiation reaction occurs at 550–850 °C. Alongside multiple stages of phase transformations, the final grain structure formation occurs through the continuous growth of the (003) and (104) facets. During the reaction, Mn acts as the charge-compensating element and exhibits depth-dependent characteristics. When the sodiation reaction dominates over dehydration, the reaction intermediates undergo gradual electronic structure changes with increasing temperature, as indicated by the spectral features of TM3d-O2p hybrid states. Calcination duration is also a critical parameter governing the microstructure, surface reactivity, phase fraction distribution and electrochemical performance of the material. The optimal calcination duration was determined to be 18 hours at 850 °C under the conditions evaluated here. Calcination beyond this duration was found to be detrimental to electrochemical performance due to Na and O loss and heterogeneous sodium distribution throughout the particles. Our work sheds light on the complex crystallographic-chemical-microstructural evolution of sodium ion layered oxide cathodes and provides insight into precisely tuning material properties which are intimately linked to battery performances.
- 12 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (22) , 17063-17074
Open AccessElucidating the phase transformations and grain growth behavior of O3-type sodium-ion layered oxide cathode materials during high temperature synthesis
Understanding the formation mechanism of layered oxide cathodes via solid-state synthesis is imperative to achieving controllability over their materials properties and electrochemical behaviors. In this work, we investigate the phase and microstructure evolution during the synthesis of NaNi1/3Fe1/3Mn1/3O2, a model sodium-ion layered oxide cathode, using a combination of imaging, diffraction, and spectroscopic techniques. We unravel the synthetic mechanistic pathways involved in the high-temperature calcination reaction, as well as elaborate the synthesis-microstructure-performance relationship of this material. The formation of the final layered oxide phase involves a gradual transformation through a sodiated oxyhydroxide intermediate. During the reaction, the precursor dehydration reaction dominates at 250–550 °C, while the major sodiation reaction occurs at 550–850 °C. Alongside multiple stages of phase transformations, the final grain structure formation occurs through the continuous growth of the (003) and (104) facets. During the reaction, Mn acts as the charge-compensating element and exhibits depth-dependent characteristics. When the sodiation reaction dominates over dehydration, the reaction intermediates undergo gradual electronic structure changes with increasing temperature, as indicated by the spectral features of TM3d-O2p hybrid states. Calcination duration is also a critical parameter governing the microstructure, surface reactivity, phase fraction distribution and electrochemical performance of the material. The optimal calcination duration was determined to be 18 hours at 850 °C under the conditions evaluated here. Calcination beyond this duration was found to be detrimental to electrochemical performance due to Na and O loss and heterogeneous sodium distribution throughout the particles. Our work sheds light on the complex crystallographic-chemical-microstructural evolution of sodium ion layered oxide cathodes and provides insight into precisely tuning material properties which are intimately linked to battery performances.