FRFabio Carlos da Rocha

Fabio Carlos da Rocha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fabio Carlos da Rocha has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Propriedades efetivas de ordem superior de meios unidimensionais microperiódicos funcionalmente graduados localmente lineares

    by Leslie D. Pérez-Fernández, Julián Bravo-Castillero, Fabio C. da Rocha, Maria S. M. Sampaio

    Apresenta-se a aplicação de uma metodologia de obtenção das propriedades efetivas de ordem superior de uma barra elástica microperiódica funcionalmente graduada com comportamentos constitutivo linear e efetivo não linear com efeitos de gradiente de segunda ordem. Tal metodologia baseia-se na homogeneização assintótica e na invariância da densidade de energia efetiva com relação às escalas estruturais e tem sido aplicada com sucesso a materiais compósitos. Um exemplo é apresentado para ilustrar o efeito de escala, isto é, o fato experimentalmente observado de que as propriedades efetivas de ordem superior são desprezáveis em presença de separação de escalas estruturais, enquanto tais propriedades devem ser consideradas quando a escala da heterogeneidade é da mesma ordem que a escala do meio como um todo.

  • Open Access

    Homogeneização de uma barra não periódica funcionalmente graduada via método de dois espaços

    by Leslie D. Pérez-Fernández, Julián Bravo-Castillero, Fabio C. da Rocha, Maria S. M. Sampaio

    Apresenta-se a aplicação do método de homogeneização não periódica de dois espaços para modelar o comportamento efetivo de uma barra micro-heterogênea funcionalmente graduada com comportamento constitutivo linear. Um exemplo é apresentado para ilustrar o fato de que a solução exata do problema que modela o comportamento da barra tende para a solução do chamado problema homogeneizado que modela o comportamento da barra homogênea equivalente obtido da aplicação do método de dois espaços.

  • Open Access

    Static Mechanical Analysis of Nanobeams Reinforced with Graphene Nanoplatelets Using Modified Couple Stress Theory

    by Elyakim Aguiar Santana, Leonardo Fellipe Prado Leite, Fabio Carlos da Rocha, Leslie Darien Pérez Fernández, Julián Bravo Castillero, Maria Do Socorro Martins Sampaio

    Composite materials are fundamental in contemporary engineering, standing out for their ability to combine different raw materials to create new materials with superior properties. Graphene, characterized by its flat two-dimensional (2D) carbon monolayer structure with a thickness of 0.34 nm, has aroused considerable interest due to its remarkable mechanical, thermal, and electrical properties. In particular, graphene derivatives, such as graphene nanoplatelets (GNP) and carbon nanotubes (CNT), have been widely explored as reinforcements in composites. Compared to CNT, GNP offers a more economical alternative and a greater surface area, available in various sizes, from nanometers to micrometers. Micro- and nanoscale composites serve as models for assessing material performance in multiple industries, such as automobiles, aviation, medicine, and construction, especially in cases where experimental methods are costly. Modeling and simulation techniques are employed to mitigate the costs associated with experimentation, from quantum mechanics to continuum mechanics. This work proposes a variational formulation to model the static mechanical behavior of nanobeams reinforced with graphene nanoplatelets. The micromechanical constitutive model modified Couple Stress, coupled with high-order beam kinematics, is developed to obtain the governing equations and their boundary conditions. The Navier procedure is utilized to develop an analytical solution to the problem. The results are compared with the literature, and the proposed model is proven accurate.

  • Open Access

    Modifying the refined zigzag theory to incorporate functional gradation into the bending analysis of laminated beams

    by Maria Do Socorro Martins Sampaio, Joseph Richard Santana Rodrigues, Fabio Carlos da Rocha, Leslie Darien Pérez Fernández, Julián Bravo Castillero

    Extensive research has been conducted in the field of composite materials, particularly in laminated composites. However, laminated composites often face challenges such as stress concentration at interfaces due to the sharp differences in properties between layers. This study proposes an approach to mitigate stress concentrations in laminated composites using functionally graded materials (FGM). FGM is achieved by gradually varying properties across the thickness of each beam layer, employing the power law in conjunction with the rule of mixtures. The modeling is based on the refined zigzag theory (RZT), with an additional introduction of the sublayers to capture the functional gradient. The analysis involves deriving the zigzag function for FGM, which is referred to as modified RZT. Subsequently, the kinematic model is applied based on the principle of minimum total energy to derive the Euler equation and its associated boundary conditions. For analytical resolution, the Navier procedure is employed. The results obtained for displacement and tension fields are compared with other formulations from the literature, demonstrating alignment and validation of the proposed method.

  • Open Access

    Elastostatic analysis using the boundary element method and the Aifantis gradient elasticity theory

    by Fabio Carlos da Rocha, Leslie Darien Pérez Fernández, Julián Bravo Castillero, Maria Do Socorro Martins Sampaio

    The increasing use of micro and nano-scale structures has sparked interest in theories incorporating the effect of scale since the classical continuum theory has limitations in capturing effects that depend on size. Therefore, three-dimensional elastostatic microstructure modeling is carried out in this work using the boundary element method (BEM).To account for microstructural effects, the simplified gradient theory proposed by Aifantis, a particularization of Mindlin's general theory, was employed. A variational argument was established to determine the governing equations and boundary conditions for the problem. This argument explains the fundamental solution of gradient elasticity, and the integral contour representation is constructed with the aid of the reciprocal identity. Curved triangular elements of Proriol spectral functions were used to approximate the geometry and the physical parameters for the discretization of the BEM. The presented formulation yielded results consistent with other analyses in the literature.

  • Open Access

    A proposal for a unified high-order quasi-3D kinematic model coupled with zigzag function to model laminated composite beams

    by Maria Do Socorro Martins Sampaio, Jéssica Simões Rodrigues, Leonardo Fellipe Prado Leite, Fabio Carlos da Rocha, Leslie Darien Pérez Fernández, Julián Bravo Castillero

    Laminated composite materials have become increasingly prevalent in various engineering applications due to their remarkable stiffness/mass ratio and ease of manufacture. However, the classical theory fails to address certain limitations in modeling laminated composite beams, such as the absence of shear stress at the top and bottom edges, the non-uniform distribution of the shear stress field, and the zigzag effect in the field axial displacement. This study presents a newly proposed unified high-order quasi-3D kinematic model, which is coupled with a novel zigzag function to overcome the limitations encountered when it uses classical beam theory. This approach eliminates the need for correction factors required in Timoshenko beam theory and accurately captures the cross-section warping and transverse normal deformation resulting from the incorporated quasi-3D effect. Finally, the results were validated by comparing the displacement fields, normal stresses, transverse normal stress, and shear stress with reference values in the literature.

  • Open Access

    Analytical formulae for the higher-order effective coefficients of periodic laminated elastic composites with imperfect contact

    by Julián Bravo Castillero, Leslie Darien Pérez-Fernández, Fabio Carlos da Rocha, Maria Do Socorro Martins Sampaio

    Analytical formulae are derived for the effective coefficients of linear elastic second-order laminate composite materials made of any finite number of linear elastic first-order layers. Imperfect contact conditions are considered at the interfaces, and small strains are assumed at the micro and macro scales. The “micro-macro” homogenization procedure used here is reported in Continuum Mech. Thermodyn. (2020) 32:1251-1270 wherein only numerical studies are presented. Asymptotic homogenization method results at the micro-scale level are combined with the macro-scale parameters based on the equivalence of the stored energies on the periodic cell (i.e., the energy-averaging theorem known as the Hill-Mandel condition). Some comparisons are considered for validation. To the best of our knowledge, the fully analytical application of this methodology to the case of laminate media has not been reported previously, that is, with the analytical solution of the local problems. The formulas obtained could be useful to control numerical codes in more complex periodic cells. Projects PAPIIT DGAPA UNAM IN101822, Mexico, and CNPq Universal Nº 402857/2021-6, Brazil, are gratefully acknowledged. CAPES Brazil Program (PRAPG) – Edital No 14/2023 is also recognized.

  • Open Access

    Asymptotic Homogenization Method with fictitious multilayers applied to the mesoscale characterization of concrete beams

    by Fabio Carlos da Rocha, Leonardo Fellipe Prado Leite, Elyakim Aguiar Santana, Julián Bravo Castillero, Leslie Darien Pérez Fernández, Maria Do Socorro Martins Sampaio

    The escalating complexity of engineering challenges necessitates the utilization of increasingly efficient materials, often met through the adoption of composite materials as a viable solution. Concrete stands out as one of the most prevalent composite materials in civil engineering, evolving through alterations in its constituent components as researchers pursue enhanced durability, workability, and sustainability. However, traditional theories treating concrete as a homogenous isotropic material prove inadequate for predicting the mechanical properties of these innovative concretes, primarily due to the excessive costs associated with experimental analyses. Consequently, this study introduces a high-order zig-zag multilayer theory incorporating the asymptotic homogenization method. The variational formulation of a unified beam kinematics was used to carry out a multiscale analysis through the asymptotic expansion of the unknown variables. This methodology facilitates the transformation of a beam composed of heterogeneous materials into an equivalent homogeneous. The findings of the formulation proposed agree with established numerical and experimental formulations documented in the literature, even when employing a one-dimensional beam theory.

  • Open Access

    ANÁLISE ESTÁTICA DE MICROVIGAS DE TIMOSHENKO POR MEIO DA TEORIA TENSÃO-MOMENTO MODIFICADA

    by Fabio Rocha, Joseph Richard Santana Rodrigues

    O aumento da utilização de vigas em escalas micro e nano motivou o desenvolvimento de teorias capazes de incorporar os efeitos de escala, uma vez que a teoria clássica revela limitações na sua capacidade de modelar com precisão os fenômenos dependentes do tamanho. O presente estudo aborda essa lacuna ao empregar a teoria de vigas de Timoshenko aplicada à teoria da elasticidade com gradiente de deformação na análise de vigas sob diferentes condições de vinculação: simplesmente apoiada, duplamente engastada, engastada e apoiada, engastada e livre. Para a formulação do problema foi utilizado o Método de Ritz. Os resultados obtidos foram comparados com aqueles derivados da mecânica do contínuo clássica e outros disponíveis na literatura. Palavras-chaves: efeito de escala, teoria de viga de Timoshenko, gradiente de deformação.

  • Open Access

    HIGH-ORDER ZIG-ZAG THEORIES TO STATIC LAMINATED COMPOSITE BEAM ANALYSIS BY THE RAYLEIGH-RITZ METHOD

    by Leonardo Fellipe Prado Leite, Fabio Carlos Da Rocha

    Technological advancements across various engineering fields have grown demand for highly efficient materials for specific applications. Laminated composite materials have emerged as a promising solution, offering a combination of favorable mechanical properties by layering different materials. Theories, such as zig-zag theories, have been developed to predict the mechanical behavior of these materials under external stresses. This study investigates the outcomes provided by the Rayleigh-Ritz variational method, employing different approximation functions, particularly focusing on unified higher-order zig-zag kinematics. All proposed shape functions agree to the reference values, but the model with polynomial shape function shows more applications possibilities. Keywords: composite materials, composite laminated beams, zig-zag theory, Rayleigh-Ritz method.