KČKristina Tolić Čop

Kristina Tolić Čop

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kristina Tolić Čop has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ultrafast microwave synthesis of defect-rich graphitic carbon nitride for enhanced photocatalytic degradation of procaine

    by Debora Briševac, Floren Radovanović-Perić, Kristina Tolić Čop, Gordana Matijašić, Lidija Ćurković, Davor Ljubas

    Defect-rich amorphous graphitic carbon nitride prepared within minutes in a household microwave oven exhibits strongly enhanced visible-light-driven degradation of procaine, highlighting a sustainable photocatalyst synthesis.

  • Open Access

    Computational Dataset for Polymer–Pharmaceutical Interactions: MD/MM-PBSA and DFT Resources for Molecularly Imprinted Polymer (MIP) Design

    by David Visentin, Mario Lovrić, Dejan Milenković, Robert Vianello, Željka Maglica, Kristina Tolić Čop, Dragana Mutavdžić Pavlović

    Molecularly imprinted polymers (MIPs) are promising sorbents for selectively capturing pharmaceutically active compounds (PhACs), but design remains slow because candidate screening is largely experimental or based on computationally expensive methods. We present MIP–PhAC, an open, curated resource of polymer–pharmaceutical interaction energies generated from molecular dynamics (MD) followed by MM/PBSA analysis, with a small DFT subset for cross-method comparison. This resource is comprised of two complementary datasets: MIP–PhAC-Calibrated, a benchmark set with manually verified pH-7 microstates that reports both monomeric (pre-polymerized) and polymeric (short-chain) MD/MMPBSA energies and includes a DFT subset; and MIP–PhAC-Screen, a broader, high-throughput collection produced under a uniform automated workflow (including automated protonation) for rapid within-polymer ranking and machine learning development. For each MIP—PhAC pair we provide ΔG* components (electrostatics, van der Waals, polar and non-polar solvation; −TΔS omitted), summary statistics from post-convergence frames, simulation inputs, and chemical metadata. To our knowledge, MIP–PhAC is the largest open, curated dataset of polymer–pharmaceutical interaction energies to date. It enables benchmarking of end-point methods, reproducible protocol evaluation, data-driven ranking of polymer–pharmaceutical combinations, and training/validation of machine learning (ML) models for MIP design on modest compute budgets.


  • Open Access

    Preparation and Application of Sulfamethoxazole-Imprinted Polymer on Solid-Phase Extraction of Pharmaceuticals from Water

    by Kristina Tolić Čop, Stjepan Jozinović, David Visentin, Dejan Milenković, Petra Vukovinski, Ramona Petko, Robert Vianello, Dragana Mutavdžić Pavlović

    Pharmaceutical compounds are small, invisible, and biologically powerful molecules that, due to widespread production and consumption, have become part of the environment, causing long-term adverse effects on biota even at low doses. Advances in sensitive and reliable analytical methods have made their detection possible in complex environmental matrices such as wastewater. Given the large number of synthesized pharmaceuticals with various therapeutic purposes, the occurrence of a synergistic effect is to be expected, interfering with their analysis. Therefore, the challenging analysis is often improved through the application of different sample preparation techniques. This paper includes the development of an SPE-HPLC-DAD method for the determination of eleven pharmaceuticals from water samples. To achieve better recoveries for the specified pharmaceutical (sulfamethoxazole) and possibly other components of the mixture, a sulfamethoxazole-imprinted polymer (MIP-SMETOX) was prepared and used in combination with a commercial sorbent (Oasis HLB) for MIP-SPE-HPLC-DAD. After optimization of the extraction conditions, both methods were validated. The LOD was 0.1 to 0.5 µg/L for SPE-HPLC-DAD and 0.1 to 0.25 µg/L for MIP-SPE-HPLC-DAD, depending on the pharmaceuticals. The matrix effect is different (77–196%) for both methods. A decrease in the signal for sulfamethoxazole (77%) was observed with SPE-HPLC-DAD, while MIP-SMETOX as a sorbent is not suitable for procaine (196%), and this is also the highest matrix effect. To extend the data obtained, additional in silico methods were used to gain deeper insights into the nature and strength of the binding interactions. Both methods (with and without MIP) confirmed their purpose by determining various validation performance features, and the final goal of the developed methods was tested using complex wastewater. The MIP-SMETOX produced justified its production, as the MIP-SPE-HPLC-DAD method is generally slightly better than the method using only a commercial sorbent.


  • Open Access

    Diazepam Photocatalytic Degradation in Laboratory- vs. Pilot-Scale Systems: Differences in Degradation Products and Reaction Kinetics

    by Kristina Tolić Čop, Mia Gotovuša, Dragana Mutavdžić Pavlović, Dario Dabić, Ivana Grčić

    Industrial growth led to the expansion of existing environmental problems, where different kinds of pollutants can enter the environment by many known routes, particularly through wastewater. Among other contaminants, pharmaceuticals, such as diazepam, once released, pose a significant challenge related to their removal from complex environmental matrices due to their persistence and potential toxicity. For this reason, it is a great challenge to find suitable methods for the treatment of wastewater. The aim of this paper was to investigate the stability of diazepam, subjecting it to various degradation processes (hydrolysis and photolysis), focusing on photocatalysis, an advanced oxidation process commonly used for the purification of industrial wastewater. The photocatalytic system consisted of UV-A and simulated solar irradiation with titanium dioxide (TiO2) immobilized on a glass mesh as a photocatalyst, with an additional reaction performed in the presence of an oxidizing agent, i.e., hydrogen peroxide, to improve diazepam removal from water matrices. The kinetic rate of diazepam degradation was monitored with a high-performance liquid chromatograph coupled with a photodiode array detector (HPLC-PDA). The target compound was characterized as a hydrolytically and photolytically stable compound with t1/2 = 25 h. The presence of an immobilized TiO2 catalyst contributed significantly to the degradation of diazepam under the influence of UV-A and simulated solar radiation, with t1/2 in the range of 1.61–2.56 h. Five degradation products of diazepam were identified at the laboratory scale by MS analysis (m/z = 267, m/z = 273, m/z = 301, m/z = 271, and m/z = 303), while the toxicity assessment revealed that diazepam exhibited developmental toxicity and a low bioaccumulation factor. The pilot-scale process resulted in significant improvements in diazepam degradation with the fastest degradation kinetics (0.6888 h−1). These results obtained at the pilot scale highlight the potential for industrial-scale implementation, offering a promising and innovative solution for pharmaceutical removal from wastewater.


  • Open Access

    Influence of Different Precursors on Properties and Photocatalytic Activity of g-C3N4 Synthesized via Thermal Polymerization

    by Debora Briševac, Ivana Gabelica, Floren Radovanović-Perić, Kristina Tolić Čop, Gordana Matijašić, Davor Ljubas, Lidija Ćurković

    In this research, an emerging, non-metallic photocatalyst was prepared by the thermal polymerization method from three different precursors: urea, melamine, and three mixtures of melamine and cyanuric acid. Graphitic carbon nitride (g-C3N4) samples from urea and melamine were synthesized in a muffle furnace at three different temperatures: 450°, 500°, and 550 °C for 2 h, while the samples made of a mixture of melamine and cyanuric acid (with mass ratios of 1:1, 1:2, and 2:1) were synthesized at 550 °C for 2 h. All the samples were characterized in order to determine their chemical and physical properties, such as crystallite size and structure, and phase composition by the following techniques: Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS). Nitrogen adsorption/desorption isotherms were used to investigate the Brunauer, Emmett, and Teller (BET) specific surface area and Barrett–Joyner–Halenda (BJH) pore size distribution. Band gap values were determined by diffuse reflectance spectroscopy (DRS). Furthermore, adsorption and photocatalytic degradation of the local anesthetic drug procaine were monitored under UV-A, visible, and simulated solar irradiation in a batch reactor. Kinetic parameters, as well as photocatalytic mechanisms using scavengers, were determined and analyzed. The results of the photocatalysis experiments were compared to the benchmark TiO2 Evonik Aeroxide P25. The results indicated that the g-C3N4 sample synthesized from urea at 500 °C for 2 h exhibited the highest degradation rate of procaine under visible light.


  • Open Access

    Synergistic Removal of Diclofenac via Adsorption and Photocatalysis Using a Molecularly Imprinted Core–Shell Photocatalyst

    by Ivana Gabelica, Floren Radovanović-Perić, Gordana Matijašić, Kristina Tolić Čop, Lidija Ćurković, Dragana Mutavdžić Pavlović

    In this work, a newly developed magnetic molecularly imprinted Fe3O4/SiO2/TiO2/MIP photocatalyst with diclofenac (DIC) as the template was prepared by microwave-assisted synthesis. The molecularly imprinted TiO2 layer has specific cavities designed for the DIC target molecule (imprint), resulting in a synergistic effect of extraction by adsorption and photocatalysis. For reference, non-imprinted magnetic nanoparticles (Fe3O4/SiO2/TiO2) were prepared using the same procedure. The obtained particles were characterized by X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), SEM-EDX, vibrating-sample magnetometry (VSM) and diffuse reflectance spectroscopy (DRS). Specific surface area, pore volume and pore size distribution were evaluated using Brunauer–Emmett–Teller (BET) adsorption–desorption isotherms. The synergistic effect of adsorption and photocatalysis as well as the kinetics and mechanism of DIC degradation using Fe3O4/SiO2/TiO2/MIP and Fe3O4/SiO2/TiO2 were determined and analysed. The adsorption efficiency of Fe3O4/SiO2/TiO2/MIP for DIC (10 mg dm−3) was around 86% after 60 min. The DIC (10 mg dm−3) removal efficiency of Fe3O4/SiO2/TiO2/MIP was around 80% after 30 min adsorption and 120 min of reaction under both UV-A- and solar-simulated light irradiation.


  • Open Access

    Influence of Organic Matter on the Sorption of Cefdinir, Memantine and Praziquantel on Different Soil and Sediment Samples

    by Dragana Mutavdžić Pavlović, Kristina Tolić Čop, Helena Prskalo, Mislav Runje

    Pharmaceuticals are known for their great effects and applications in the treatment and suppression of various diseases in human and veterinary medicine. The development and modernization of science and technologies have led to a constant increase in the production and consumption of various classes of pharmaceuticals, so they pose a threat to the environment, which can be subjected to the sorption process on the solid phase. The efficiency of sorption is determined by various parameters, of which the physicochemical properties of the compound and the sorbent are very important. One of these parameters that determine pharmaceutical mobility in soil or sediment is the soil–water partition coefficient normalized to organic carbon (Koc), whose determination was the purpose of this study. The influence of organic matter, suspended in an aqueous solution of pharmaceutical (more precisely: cefdinir, memantine, and praziquantel), was studied for five different types of soil and sediment samples from Croatia. The linear, Freundlich, and Dubinin–Raduskevich sorption isotherms were used to determine specific constants such as the partition coefficient Kd, which directly describes the strength of sorbate and sorbent binding. The linear model proved to be the best with the highest correlation coefficients, R2 > 0.99. For all three pharmaceuticals, a positive correlation between sorption affinity described by Kd and Koc and the amount of organic matter was demonstrated.


  • Open Access

    Photocatalytic Activity of TiO2 for the Degradation of Anticancer Drugs

    by Kristina Tolić Čop, Dragana Mutavdžić Pavlović, Tatjana Gazivoda Kraljević

    To prevent water pollution, photocatalysis is often used to remove small molecules such as drugs by generating reactive species. This study aimed to determine the photocatalytic activity of two anticancer drugs, imatinib and crizotinib, and to investigate various influences that may alter the kinetic degradation rate and ultimately the efficacy of the process. In order to obtain optimal parameters for the removal of drugs with immobilized TiO2, the mutual influence of the initial concentration of the contaminant at environmentally relevant pH values was investigated using the response surface modeling approach. The faster kinetic rate of photocatalysis was obtained at pH 5 and at the smallest applied concentration of both drugs. The photocatalytic efficiency was mostly decreased by adding various inorganic salts and organic compounds to the drug mixture. Regarding the degradation mechanism of imatinib and crizotinib, hydroxyl radicals and singlet oxygen showed a major role in photochemical reactions. The formation of seven degradation products for imatinib and fifteen for crizotinib during the optimal photocatalytic process was monitored by high-resolution mass spectrometry (HPLC-QqTOF). Since the newly formed products may pose a hazard to the environment, their toxicity was studied using Vibrio fischeri, where the significant luminescence inhibition was assessed for the mixture of crizotinib degradants during the photocatalysis from 90 to 120 min.


  • Open Access

    Sorption Potential of Different Forms of TiO2 for the Removal of Two Anticancer Drugs from Water

    by Kristina Tolić Čop, Dragana Mutavdžić Pavlović, Katarina Duić, Minea Pranjić, Iva Fereža, Igor Jajčinović, Ivan Brnardić, Vedrana Špada

    Anticancer drugs pose a potential risk to the environment due to their significant consumption and biological effect even at low concentrations. They can leach into soils and sediments, wastewater, and eventually into drinking water supplies. Many conventional technologies with more effective advanced oxidation processes such as photocatalysis are being extensively studied to find an economical and environmentally friendly solution for the removal of impurities from wastewater as the main source of these pharmaceuticals. Since it is impossible to treat water by photocatalysis if there is no sorption of a contaminant on the photocatalyst, this work investigated the amount of imatinib and crizotinib sorbed from an aqueous medium to different forms of photocatalyst. In addition, based on the sorption affinity studied, the applicability of sorption as a simpler and less costly process was tested in general as a potential route to remove imatinib and crizotinib from water. Their sorption possibility was investigated determining the maximum of sorption, influence of pH, ionic strength, temperature, and sorbent dosage in form of the suspension and immobilized on the fiberglass mesh with only TiO2 and in combination with TiO2/carbon nanotubes. The sorption isotherm data fitted well the linear, Freundlich, and Langmuir model for both pharmaceuticals. An increasing trend of sorption coefficients Kd was observed in the pH range of 5–9 with CRZ, showing higher sorption affinity to all TiO2 forms, which was supported by KF values higher than 116 (μg/g)(mL/μg)1/n. The results also show a positive correlation between Kd and temperature as well as sorbent dosage for both pharmaceuticals, while CRZ sorbed less at higher salt concentration. The kinetic data were best described with a pseudo-second-order model (R2 > 0.995).