RSRostyslav Stotsko

Rostyslav Stotsko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rostyslav Stotsko has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Structural and Kinematic Synthesis of a Differential Mechanism for Actuating an Inertial-Type Vibration Exciter

    by Vitaliy Korendiy, Pavlo Krot, Oleh Parashchyn, Rostyslav Stotsko, Olena Lanets

  • Vibration separation of one-type metal-containing powder-like polymer composites and fatigue durability of thin-walled products made of them

    by V. S. Trush, V. S. Moravskyi, V. M. Korendiy, A. V. Pokhmurska, R. Z. Stotsko, K. V. Trush, A. G. Luk’YAnenko

    The feasibility of using a combined method for the separation of powdered polymers activated by dispersed metals is established. Vibration, together with the transfer of the studied polymer mixture to a fluidized state, can more effectively separate the mixture into fractions with different metal contents. The design of the installation makes it possible to unload individual fractions of the mixture for their further analysis, which is important for laboratory research. The fatigue life of thin-sheet specimens made of powdered polyvinyl chloride activated with dispersed zinc under pure bending, is studied. Fractographic features of fractures are identified.

  • The influence of dry anisotropic friction of the first kind on the kinematic characteristics of a capsule with an unbalanced vibration drive

    by V. M. Korendiy, V. S. Trush, O. Ya. Parashchyn, R. Z. Stotsko, K. V. Trush, R. Ya. Predko, A. G. Lyk’yAnenko

  • Open Access

    Dynamics and stability analysis of a single-mass oscillatory system with a slider-crank vibration exciter

    by Vitaliy Korendiy, Taras Vilchynskyi, Vladyslav Kyrychuk, Rostyslav Predko, Andrew Stetsko, Rostyslav Stotsko

    Traditional slider-crank mechanisms transmit high loads through the mechanical structure, hindering the design of compact machines. The paper considers the dynamic behavior of a single-mass oscillatory system actuated by a slider-crank excitation mechanism. The research methodology involves mathematical modeling and computer simulation to analyze the trajectory and kinematic characteristics of the considered oscillatory system. The dynamic diagram of the single-mass vibratory system is considered, and the mathematical model describing its motion is derived using Euler-Lagrange equations. The obtained results show the time response curves of the oscillating mass plane-parallel motion under different excitation conditions, as well as the amplitude and phase responses as functions of frequency. The primary scientific novelty of this research is determining the influence of specific design parameters of the vibration exciter on the trajectory of the working member motion, as well as defining the stability of the response at different frequencies. The research highlights the possibility of generating circular, elliptical, and rectilinear vibrations of the working member depending on the specific operation, such as conveying, screening, sieving, or compacting. This adaptability is crucial for tailoring the system to different industrial applications and optimizing its performance for specific tasks.


  • Open Access

    Constructing the schematic and mathematical model of the dynamics of a vibratory drum separator

    by Dariia Rebot, Volodymyr Topilnytskyy, Inga Svidrak, Rostyslav Stotsko, Anzhela Shevchuk

    A structural diagram of a vibratory drum separator has been developed, and based on it, a mathematical model of the separator’s oscillatory motion has been constructed. The mathematical model was built using nonlinear mechanics methods and Lagrange equations. The obtained dependencies allow for determining the influence of geometric and physico-mechanical parameters on various factors affecting the intensity of the separation process. The research results should be used both at the design stages of vibratory separators and when selecting their parameters and operational modes.


  • Open Access

    Patterns of the formation of the architecture of commercial establishments of small settlements of the Lviv region

    by Oleksandra Silnyk, Rostyslav Stotsko

    The peculiarity of the Lviv region as a tourist center has an impact on the formation of public buildings and directly on commercial establishments. A number of factors affecting the architecture and economic development of stores change every day. The study of trade establishments of small settlements opens up an opportunity for the creation of modern models of shops and markets characteristic of the Lviv region with subsequent implementation in real construction. The analysis and classification of commercial establishments in the Lviv region makes it possible to establish several types of buildings - according to the nature of the location in the urban structure of settlements, according to architectural and planning solutions, constructive qualities and marketing features. Large commercial establishments located on the outskirts of Lviv satisfy the needs of buyers and have a logical layout, are equipped with appropriate engineering equipment, parking spaces and entrances, stand out with a modern exterior devoid of individuality. Shops on the territory of the settlements practically do not meet the accepted principles from a constructive, stylistic and normative point of view. Most often, these are buildings erected in the previous century, which need renovation for further operation. In order to identify optimal options for the design and development of retail establishments, it is advisable to pay attention to local traditions in architecture and everyday life, at the same time as established patterns in consumer needs and favorable investment development. The study of trade establishments in the context of urban planning features and the needs of the population highlights clear directions for improving the rural environment not only for local residents, but also for tourists. The study of architectural and planning solutions of trade establishments of united territorial communities of the Lviv region is important: for the development of the region's economy; improvement of the cultural and household infrastructure of settlements in territorial communities; creating additional jobs and improving the quality of life in remote villages.

  • Open Access

    Design peculiarities and mathematical model of an enhanced low-frequency vibratory cavitation device

    by Ivan Aftanaziv, Vitaliy Korendiy, Oleksandr Kachur, Orysia Strogan, Inga Svidrak, Rostyslav Stotsko

    The thorough analysis of the technological processes used to purify the wastewater from food and processing enterprises (bakery, brewery, coffee, sugar, beverage, etc.) has established that among the most effective processes are the physical ones. From the wide range of physical methods of wastewater treatment, the cavitation treatment methods are of the most promising from the viewpoint of industrial application. The present paper considers an enhanced design of a low-frequency vibratory cavitation device with an electromagnetic drive. Unlike many other cavitators of ultrasonic or hydrodynamic action, the proposed vibratory cavitation device can treat the wastewater in a continuous liquid flow, has no rotating components and parts, which significantly increases its reliability and durability, and can be equipped with changeable concaves (grates) depending on the pollutants to be purified. The research methodology consists of two main stages: development of the dynamic diagram and mathematical model of the considered cavitation device; numerical simulation of the working members vibrations at different operational conditions. The obtained results are presented in the form of time dependencies of the concaves (grates) displacements, speeds, and accelerations under various viscous friction and excitation parameters. The main scientific novelty of this study, in addition to the improved design of the vibratory cavitator, is considering the influence of the changeable electromagnetic excitation force and viscous friction force on the dynamic behavior of the concaves (grates). Further investigations on the present topic can be focused on the practical implementation and experimental testing of the proposed cavitation device in order to increase the water purification degree.


  • Open Access

    Захист населених пунктів від ударних та диверсійно-розвідувальних безпілотних літальних апаратів

    by І. С. Афтаназів, Р. З. Стоцько, Л. І. Шевчук, Л. Р. Струтинська, О. І. Строган, О. О. Бойко

    Темою даного дослідження є захист населених пунктів від нападу на них ворожих ударних та диверсійно-розвідувальних безпілотних літальних апаратів (БПЛА), його предметом є застосування кінематичного проєктування для визначення координат просторових переміщень літальних апаратів. Мета роботи – розробка принципових схем облаштування опорних захисних пунктів ліквідації ворожих БПЛА для вдосконалення обороноздатності населених пунктів України. Методологією проведення досліджень було застосування положень теорії відображення координат та траєкторій просторових переміщень рухомих об’єктів засобами нарисної геометрії із врахуванням динамічних особливостей кінематичного проектування. Основним результатом дослідження є створення методики розрахунків координат, траєкторій та параметрів просторових переміщень рухомих на незначних висотах повітряних цілей. Результати дослідження дозволять підвищити ефективність виявлення ворожих ударних та диверсійно-розвідувальних БПЛА, включно із дронами іранського виробництва типу Shahed-136. На прикладі міста Львів проілюстрована схема оптимального розташування опорних пунктів із радіолокаційною пошуковою апаратурою та стрілецьким озброєнням ліквідації ворожих БПЛА.