Abel-John Buchner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abel-John Buchner has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Christoph Kaiser
DLR (German Aerospace Center) Institute of Aeroelasticity Göttingen Germany
1 shared publicationDaniele Fiscaletti
Department of Maritime & Transport Technology Faculty of Mechanical Engineering Delft University of Technology Delft The Netherlands
1 shared publicationDavid Quero
DLR (German Aerospace Center) Institute of Aeroelasticity Göttingen Germany
1 shared publicationDimitris Boskos
Delft Center for Systems and Control Delft University of Technology Delft The Netherlands
1 shared publication- Dimitris Boskos
Delft Center for Systems and Control Delft University of Technology Delft The Netherlands
1 shared publication Guillaume Ricard
Department of Maritime & Transport Technology Faculty of Mechanical Engineering Delft University of Technology Delft The Netherlands
1 shared publication
Latest Publications
- Open Access
Transonic Buffet Modeling via Invariant Manifolds
In transonic flow over aircraft wings, shock-boundary-layer interactions can give rise to transonic buffet, which degrades maneuverability through unsteady aerodynamic loads. Beyond its practical importance, two-dimensional transonic buffet represents a canonical example of a global instability for which reduced-order modeling remains challenging due to nonlinearity, sharp spatial gradients, and the coexistence of an unstable equilibrium with an attracting limit cycle. Commonly, reduced-order models of such phenomena capture nonlinear dynamics only in aerodynamic observables, while prediction of the full flow state is achieved through linear representations valid only near the unstable equilibrium or on the limit cycle. In this work, we present a reduced-order model that predicts the nonlinear evolution of the full flow field by exploiting the existence of an attracting two-dimensional invariant manifold. We adapt an existing data-driven framework for identifying invariant manifolds and the associated reduced dynamics, making it suitable for scaling to large-scale CFD applications. The invariant manifold is identified as a graph over its tangent space using an iterative encoder-update and the reduced dynamics are obtained via least-squares regression. A subsequent extended normal-form transformation enables physical interpretability of the model through a modal decomposition of the flow. The reduced-order model is identified for transonic buffet over the OAT15A supercritical airfoil, showing that it is possible to achieve this accurately using just a single training trajectory. Validation against independent simulations demonstrates accurate prediction of nonlinear behavior, together with reliable reconstruction of the full flow field, particularly in the late-transient and limit-cycle regimes.
Open AccessTransonic Buffet Modeling via Invariant Manifolds
In transonic flow over aircraft wings, shock-boundary-layer interactions can give rise to transonic buffet, which degrades maneuverability through unsteady aerodynamic loads. Beyond its practical importance, two-dimensional transonic buffet represents a canonical example of a global instability for which reduced-order modeling remains challenging due to nonlinearity, sharp spatial gradients, and the coexistence of an unstable equilibrium with an attracting limit cycle. Commonly, reduced-order models of such phenomena capture nonlinear dynamics only in aerodynamic observables, while prediction of the full flow state is achieved through linear representations valid only near the unstable equilibrium or on the limit cycle. In this work, we present a reduced-order model that predicts the nonlinear evolution of the full flow field by exploiting the existence of an attracting two-dimensional invariant manifold. We adapt an existing data-driven framework for identifying invariant manifolds and the associated reduced dynamics, making it suitable for scaling to large-scale CFD applications. The invariant manifold is identified as a graph over its tangent space using an iterative encoder-update and the reduced dynamics are obtained via least-squares regression. A subsequent extended normal-form transformation enables physical interpretability of the model through a modal decomposition of the flow. The reduced-order model is identified for transonic buffet over the OAT15A supercritical airfoil, showing that it is possible to achieve this accurately using just a single training trajectory. Validation against independent simulations demonstrates accurate prediction of nonlinear behavior, together with reliable reconstruction of the full flow field, particularly in the late-transient and limit-cycle regimes.
- Open Access
Dynamic stall of a hydrofoil with tubercles in surface gravity waves
The interaction of an object with an unsteady flow is non-trivial and is still far from being fully understood. When an airfoil or hydrofoil, for example, undergoes time-dependent motion, nonlinear flow phenomena such as dynamic stall can emerge. The present work experimentally investigates the interaction between a hydrofoil and surface gravity waves. The waves impose periodic fluctuations of the velocity magnitude and orientation, causing a steadily translating hydrofoil to be susceptible to dynamic stall at large wave forcing amplitudes. Simultaneous measurement of both the forces acting on the hydrofoil and the flow around it by means of particle image velocimetry (PIV) are performed, to properly characterise the hydrofoil-wave interaction. In an attempt at alleviating the impact of the flow unsteadiness via passive flow control, a bio-inspired tubercle geometry is applied along the hydrofoil leading edge. This geometry is known to delay stall in steady cases but has scarcely been studied in unsteady flow conditions. The vortex structures associated with dynamic stall are identified, and their trajectories, dimension, and strength characterised. This analysis is performed for both straight- and tubercled-leading-edge geometries, with tubercles found to qualitatively modify the flow behaviour during dynamic stall. Contrary to previous studies, direct measurements of lift do not evidence any strong modification by tubercles. Drag-driven horizontal force fluctuations, however, which have not previously been measured in this context, are found to be strongly attenuated. This decrease is quantified, and a physical model based on the flow observations is finally proposed.
Open AccessDynamic stall of a hydrofoil with tubercles in surface gravity waves
The interaction of an object with an unsteady flow is non-trivial and is still far from being fully understood. When an airfoil or hydrofoil, for example, undergoes time-dependent motion, nonlinear flow phenomena such as dynamic stall can emerge. The present work experimentally investigates the interaction between a hydrofoil and surface gravity waves. The waves impose periodic fluctuations of the velocity magnitude and orientation, causing a steadily translating hydrofoil to be susceptible to dynamic stall at large wave forcing amplitudes. Simultaneous measurement of both the forces acting on the hydrofoil and the flow around it by means of particle image velocimetry (PIV) are performed, to properly characterise the hydrofoil-wave interaction. In an attempt at alleviating the impact of the flow unsteadiness via passive flow control, a bio-inspired tubercle geometry is applied along the hydrofoil leading edge. This geometry is known to delay stall in steady cases but has scarcely been studied in unsteady flow conditions. The vortex structures associated with dynamic stall are identified, and their trajectories, dimension, and strength characterised. This analysis is performed for both straight- and tubercled-leading-edge geometries, with tubercles found to qualitatively modify the flow behaviour during dynamic stall. Contrary to previous studies, direct measurements of lift do not evidence any strong modification by tubercles. Drag-driven horizontal force fluctuations, however, which have not previously been measured in this context, are found to be strongly attenuated. This decrease is quantified, and a physical model based on the flow observations is finally proposed.
- Open Access
Reduced-Order Modelling and Closed-Loop Control of the Cylinder Wake
We present a model-based approach for the closed-loop control of vortex shedding in the cylinder wake. The control objective is to suppress the unsteadiness of the flow, which arises at a critical Reynolds number $Re_c$ through a supercritical Hopf bifurcation. In the vicinity of $Re_c$ the flow is well described by a forced Stuart-Landau equation derived via a global weakly nonlinear analysis. This Stuart-Landau equation governs the evolution of the amplitude $A$ of the global mode on the slow time scale. In this paper, we generalize the approach from [Sipp 2012], which considers a fixed-amplitude harmonic forcing, by allowing the forcing amplitude E0 to vary on the slow time scale. This enables the design of closed-loop controllers for multiple surrogate Stuart-Landau models, which we obtain for different classes of forcing frequencies. When these frequencies are near the global mode oscillation frequency at Rec, we can bring both $A$ and $E'$ to zero, which fully suppresses the unsteady part of the flow. We also show that near this frequency, the optimal forcing structure is in the direction of the adjoint global mode. Assuming partial velocity measurements of the flow, we design an output-feedback control law that stabilizes the flow. The approach hinges on a model predictive controller for the surrogate model, which exploits the full-order model measurements to determine the necessary forcing amplitudes while respecting the modelling constraints. We achieve suppression of the wake oscillations with spatially dense volume forcing and two-point velocity measurement at $Re=50$.Open AccessReduced-Order Modelling and Closed-Loop Control of the Cylinder Wake
We present a model-based approach for the closed-loop control of vortex shedding in the cylinder wake. The control objective is to suppress the unsteadiness of the flow, which arises at a critical Reynolds number $Re_c$ through a supercritical Hopf bifurcation. In the vicinity of $Re_c$ the flow is well described by a forced Stuart-Landau equation derived via a global weakly nonlinear analysis. This Stuart-Landau equation governs the evolution of the amplitude $A$ of the global mode on the slow time scale. In this paper, we generalize the approach from [Sipp 2012], which considers a fixed-amplitude harmonic forcing, by allowing the forcing amplitude E0 to vary on the slow time scale. This enables the design of closed-loop controllers for multiple surrogate Stuart-Landau models, which we obtain for different classes of forcing frequencies. When these frequencies are near the global mode oscillation frequency at Rec, we can bring both $A$ and $E'$ to zero, which fully suppresses the unsteady part of the flow. We also show that near this frequency, the optimal forcing structure is in the direction of the adjoint global mode. Assuming partial velocity measurements of the flow, we design an output-feedback control law that stabilizes the flow. The approach hinges on a model predictive controller for the surrogate model, which exploits the full-order model measurements to determine the necessary forcing amplitudes while respecting the modelling constraints. We achieve suppression of the wake oscillations with spatially dense volume forcing and two-point velocity measurement at $Re=50$.