Felipe Valadares Ribeiro Avelar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Felipe Valadares Ribeiro Avelar has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Fábio Luiz de Oliveira
Universidade Federal do Espirito Santo, Brazil
7 shared publications - Josimar Aleixo da Silva
Federal University of Espírito Santo. Alegre Campus, ES, Brazil
3 shared publications - Leandro Pin Dalvi
Universidade Federal do Espirito Santo, Brazil
3 shared publications - Tiago Pacheco Mendes
Departamento de Agronomia, Centro de Ciências Agrárias e Engenharias (CCAE), Universidade Federal do Espírito Santo (UFES), Alto Universitário, CP 16-Centro, Alegre 29500-000, ES, Brazil
3 shared publications - Arnaldo Henrique de Oliveira Carvalho
Instituto Federal do Espírito Santo
2 shared publications - José Francisco Teixeira Do Amaral
Centro de Ciências Agrárias e Engenharias, Departamento de Engenharia Agrícola, Universidade Federal do Espirito Santo, Alegre 29500-000, ES, Brazil
2 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by Universidade de São Paulo. Agência de Bibliotecas e Coleções Digitais
Tecnologias não químicas para a agricultura tropical
A obra Tecnologias não químicas para a agricultura tropical, da Série Produtor Rural da ESALQ/USP apresenta uma visão técnica e aplicada sobre práticas de manejo capazes de aumentar a sustentabilidade, a resiliência e a eficiência dos sistemas agrícolas tropicais. O material parte da compreensão de que a agricultura brasileira possui características próprias, como altas temperaturas, chuvas intensas, solos altamente intemperizados e intensa atividade biológica, exigindo estratégias diferentes daquelas desenvolvidas para regiões de clima temperado. Ao longo da publicação, são abordadas tecnologias não químicas baseadas em processos biológicos, físicos e mecânicos, incluindo bioinsumos, inoculantes, fungos micorrízicos, biofertilizantes, plantas de cobertura, rotação e consorciação de culturas, compostagem, vermicompostagem, biochar e práticas conservacionistas do solo. O livro também destaca o manejo ecológico de pragas por meio do uso de inimigos naturais, feromônios, armadilhas, extratos botânicos e indutores naturais de resistência, sempre enfatizando a integração dessas ferramentas em sistemas produtivos mais equilibrados. Além de apresentar conceitos e fundamentos científicos, a obra oferece orientações práticas para a adoção gradual dessas tecnologias, demonstrando como elas contribuem para reduzir a dependência de insumos químicos, fortalecer a saúde do solo, melhorar a eficiência no uso dos recursos naturais e promover uma agricultura tropical mais produtiva, resiliente e ambientalmente sustentável.
- 5 October 2026
- Published by Universidade de São Paulo. Agência de Bibliotecas e Coleções Digitais
Open AccessTecnologias não químicas para a agricultura tropical
A obra Tecnologias não químicas para a agricultura tropical, da Série Produtor Rural da ESALQ/USP apresenta uma visão técnica e aplicada sobre práticas de manejo capazes de aumentar a sustentabilidade, a resiliência e a eficiência dos sistemas agrícolas tropicais. O material parte da compreensão de que a agricultura brasileira possui características próprias, como altas temperaturas, chuvas intensas, solos altamente intemperizados e intensa atividade biológica, exigindo estratégias diferentes daquelas desenvolvidas para regiões de clima temperado. Ao longo da publicação, são abordadas tecnologias não químicas baseadas em processos biológicos, físicos e mecânicos, incluindo bioinsumos, inoculantes, fungos micorrízicos, biofertilizantes, plantas de cobertura, rotação e consorciação de culturas, compostagem, vermicompostagem, biochar e práticas conservacionistas do solo. O livro também destaca o manejo ecológico de pragas por meio do uso de inimigos naturais, feromônios, armadilhas, extratos botânicos e indutores naturais de resistência, sempre enfatizando a integração dessas ferramentas em sistemas produtivos mais equilibrados. Além de apresentar conceitos e fundamentos científicos, a obra oferece orientações práticas para a adoção gradual dessas tecnologias, demonstrando como elas contribuem para reduzir a dependência de insumos químicos, fortalecer a saúde do solo, melhorar a eficiência no uso dos recursos naturais e promover uma agricultura tropical mais produtiva, resiliente e ambientalmente sustentável.
- Open Access
- 4 January 2026
- Published by MDPI AG in Horticulturae
- Vol. 12 (1) , 61
Nutrient Use Efficiency in Yacon Potato Under Varying NPK Fertilization Rates
This study aimed to determine the nutrient use efficiency of the yacon potato under NPK fertilization at different rates. The experiment followed a randomized block design with four replications and a split-plot arrangement. The main plots consisted of three fertilization levels (60%, 100%, and 140% of the reference dose—50:80:60 kg ha−1 of NPK), with subplots to data collection intervals, performed every 30 days, for a total of 7 collections, generating 21 treatments. The dry biomass of whole plants and tuberous roots was determined. Samples were taken to determine the content of N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn. The biological utilization coefficient (BUC) was calculated by dividing the mean values of dry biomass in kilograms of plant parts by the kilogram of nutrient found in that biomass. The application of 100% of the reference dose led to the highest use efficiency of P, K, Ca, and Mg, and intermediate efficiency for N in yacon tuberous roots and total biomass production throughout the cycle, provides a significant contribution to fertilization planning for this crop. The amount applied which was 100% of the reference dose was 17, 80, and 20 kg ha−1 of N, P2O5, and K2O, respectively, at planting, supplemented with 33 and 40 kg ha−1 of N and K2O as topdressing.
- 4 January 2026
- Published by MDPI AG in Horticulturae
- Vol. 12 (1) , 61
Open AccessNutrient Use Efficiency in Yacon Potato Under Varying NPK Fertilization Rates
This study aimed to determine the nutrient use efficiency of the yacon potato under NPK fertilization at different rates. The experiment followed a randomized block design with four replications and a split-plot arrangement. The main plots consisted of three fertilization levels (60%, 100%, and 140% of the reference dose—50:80:60 kg ha−1 of NPK), with subplots to data collection intervals, performed every 30 days, for a total of 7 collections, generating 21 treatments. The dry biomass of whole plants and tuberous roots was determined. Samples were taken to determine the content of N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn. The biological utilization coefficient (BUC) was calculated by dividing the mean values of dry biomass in kilograms of plant parts by the kilogram of nutrient found in that biomass. The application of 100% of the reference dose led to the highest use efficiency of P, K, Ca, and Mg, and intermediate efficiency for N in yacon tuberous roots and total biomass production throughout the cycle, provides a significant contribution to fertilization planning for this crop. The amount applied which was 100% of the reference dose was 17, 80, and 20 kg ha−1 of N, P2O5, and K2O, respectively, at planting, supplemented with 33 and 40 kg ha−1 of N and K2O as topdressing.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 44, e305731
Paclobutrazol in the production of mini colored cauliflower with ornamental potential
The ornamental plant production sector is constantly seeking innovations to attract consumers; in this context, the cultivation of mini cauliflower introduces the novel concept of edible ornamental plants. Among the strategies investigated for obtaining mini cauliflower is the use of the plant growth regulator paclobutrazol (PBZ). In this context, cauliflower stands out as a particularly promising species. Thus, the present study aimed to evaluate the influence of PBZ on the growth and development of colored cauliflower to produce a mini ornamental and edible vegetable. The experiment was conducted in a greenhouse at the Federal University of Espírito Santo, Brazil. A completely randomized design was adopted, consisting of four PBZ application rates (1.0, 2.0, 3.0, and 4.0 mg/dm3) and a control treatment (without PBZ), with seven replicates. Morphophysiological traits were evaluated at 30, 60, 90, and 105 days after application. At the end of the growth cycle (105 day), leaf number, plant height, and accumulated dry mass were assessed. The results indicate that the application of 1.0 mg/dm3 of PBZ effectively reduced plant size (height, leaf number, and biomass accumulation), in addition to promoting earlier flowering. These results suggest that a lower PBZ application rate may enhance the ornamental potential of cauliflower, making it more visually attractive while adding the innovative characteristic of an edible ornamental plant.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 44, e305731
Open AccessPaclobutrazol in the production of mini colored cauliflower with ornamental potential
The ornamental plant production sector is constantly seeking innovations to attract consumers; in this context, the cultivation of mini cauliflower introduces the novel concept of edible ornamental plants. Among the strategies investigated for obtaining mini cauliflower is the use of the plant growth regulator paclobutrazol (PBZ). In this context, cauliflower stands out as a particularly promising species. Thus, the present study aimed to evaluate the influence of PBZ on the growth and development of colored cauliflower to produce a mini ornamental and edible vegetable. The experiment was conducted in a greenhouse at the Federal University of Espírito Santo, Brazil. A completely randomized design was adopted, consisting of four PBZ application rates (1.0, 2.0, 3.0, and 4.0 mg/dm3) and a control treatment (without PBZ), with seven replicates. Morphophysiological traits were evaluated at 30, 60, 90, and 105 days after application. At the end of the growth cycle (105 day), leaf number, plant height, and accumulated dry mass were assessed. The results indicate that the application of 1.0 mg/dm3 of PBZ effectively reduced plant size (height, leaf number, and biomass accumulation), in addition to promoting earlier flowering. These results suggest that a lower PBZ application rate may enhance the ornamental potential of cauliflower, making it more visually attractive while adding the innovative characteristic of an edible ornamental plant.
- Open Access
- 27 October 2025
- Published by Universidad Nacional de Trujillo in Scientia Agropecuaria
- Vol. 17 (1) , 103-110
Distribution dynamics of nutrient and biomass in yacon organs
Studies on nutrient absorption patterns allow for the identification of periods of peak nutritional demand, the amount of nutrients accumulated in each organ, the quantity exported by harvest, and the necessary replenishment to the soil. These insights are crucial for developing effective fertilization programs for crops. This study aimed to determine the nutrient absorption pattern of macro and micronutrients and the accumulation of biomass in various organs of yacon plants. The experiment was conducted under field conditions, following a randomized block design. The treatments consisted of different plant ages. Seven evaluations were conducted monthly, starting 30 days after transplanting. Twelve plants from the useful area were sampled for each evaluation. The plants were divided into five parts (leaves, stems, rhizophores, roots, and tuberous roots) to determine dry biomass. The samples were analyzed for N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn content. Yacon prioritized the allocation of photoassimilates for biomass production in the following order: tuberous roots, rhizophores, leaves, stems, and fine roots. Nutrient absorption by yacon plants followed this order: Ca > N > K > Mg > P > Fe > Mn > Zn > Cu. Tuberous roots were the main organ for nutrient accumulated, exporting from the system 71, 15, 57, 125, 11, 1.8, 0.87, 0.40, and 0.27 kg há-1 of N, P, K, Ca, Mg, Fe, Zn, Mn, and Cu, respectively. These results provide critical physiological parameters for formulating evidence-based fertilization programs and modeling yacon growth, thereby advancing precision nutrient management. Moreover, integrating these data into agronomic models and sustainability assessments will facilitate the crop’s development as a high-value functional food, supporting both productive and environmental goals.
- 27 October 2025
- Published by Universidad Nacional de Trujillo in Scientia Agropecuaria
- Vol. 17 (1) , 103-110
Open AccessDistribution dynamics of nutrient and biomass in yacon organs
Studies on nutrient absorption patterns allow for the identification of periods of peak nutritional demand, the amount of nutrients accumulated in each organ, the quantity exported by harvest, and the necessary replenishment to the soil. These insights are crucial for developing effective fertilization programs for crops. This study aimed to determine the nutrient absorption pattern of macro and micronutrients and the accumulation of biomass in various organs of yacon plants. The experiment was conducted under field conditions, following a randomized block design. The treatments consisted of different plant ages. Seven evaluations were conducted monthly, starting 30 days after transplanting. Twelve plants from the useful area were sampled for each evaluation. The plants were divided into five parts (leaves, stems, rhizophores, roots, and tuberous roots) to determine dry biomass. The samples were analyzed for N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn content. Yacon prioritized the allocation of photoassimilates for biomass production in the following order: tuberous roots, rhizophores, leaves, stems, and fine roots. Nutrient absorption by yacon plants followed this order: Ca > N > K > Mg > P > Fe > Mn > Zn > Cu. Tuberous roots were the main organ for nutrient accumulated, exporting from the system 71, 15, 57, 125, 11, 1.8, 0.87, 0.40, and 0.27 kg há-1 of N, P, K, Ca, Mg, Fe, Zn, Mn, and Cu, respectively. These results provide critical physiological parameters for formulating evidence-based fertilization programs and modeling yacon growth, thereby advancing precision nutrient management. Moreover, integrating these data into agronomic models and sustainability assessments will facilitate the crop’s development as a high-value functional food, supporting both productive and environmental goals.
- Open Access
- 1 January 2025
- Published by Walter de Gruyter GmbH in Open Agriculture
- Vol. 10 (1)
Physiological activities and yield of yacon potato are affected by soil water availability
The commercial cultivation of yacon is relatively new, creating several knowledge demands regarding its agricultural management, including water relations. Thus, the aim of this study is to understand the effects of different soil water availability levels on the physiological activities of yacon. The first experiment aimed to establish the survival limit of the plants under water deficit, while the second aimed to determine the range for optimal development within a smaller range of water availability. A completely randomized design was adopted, with four replications and five treatments (soil water tension levels). The first experiment used tensions of 30, 60, 100, 200, and 300 kPa, while the second used tensions of 20, 30, 45, 60, and 75 kPa. Evaluations included net CO 2 assimilation rate, stomatal conductance, transpiration rate, intercellular CO 2 concentration, chlorophyll indices, nitrogen balance, anthocyanin, and flavonoid content. The yacon’s survival limit under water deficit occurred at 200 kPa, when the plant reached the lowest assimilation rate (11.607 µmol CO 2 m −2 s −1 ), representing a 57.53% reduction in its photosynthetic capacity before dying under the 300 kPa tension. From 100 kPa tension, flavonoid production increased, indicating that yacon plants activated defense mechanisms to mitigate the effects of water stress. The highest photosynthetic rates in yacon were observed under higher water availability (lower tension, 20 kPa), close to the soil’s field capacity (10 kPa). In the first experiment, significant tuberous root production was observed only at 30 kPa, yielding approximately 1,100 g plant −1 . In the other treatments, fresh tuberous root production was around 100 g plant −1 , but without meeting commercial standards (small and very thin roots). In the second experiment, a linear decrease in production was observed as soil water availability declined. Overall, the production ranged from 1156.3 to 135.2 g plant −1 , between the highest and lowest water availability levels applied (tensions of 20 and 75 kPa, respectively), with a 16.05% reduction in yield for every 10 kPa increase in soil water tension. This result has the practical implication of demonstrating that yacon potato exhibits better physiological performance, and therefore the potential for higher productivity, when soil water availability is close to field capacity. This is a fundamental and guiding piece of information for irrigation management in yacon cultivation.
- 1 January 2025
- Published by Walter de Gruyter GmbH in Open Agriculture
- Vol. 10 (1)
Open AccessPhysiological activities and yield of yacon potato are affected by soil water availability
The commercial cultivation of yacon is relatively new, creating several knowledge demands regarding its agricultural management, including water relations. Thus, the aim of this study is to understand the effects of different soil water availability levels on the physiological activities of yacon. The first experiment aimed to establish the survival limit of the plants under water deficit, while the second aimed to determine the range for optimal development within a smaller range of water availability. A completely randomized design was adopted, with four replications and five treatments (soil water tension levels). The first experiment used tensions of 30, 60, 100, 200, and 300 kPa, while the second used tensions of 20, 30, 45, 60, and 75 kPa. Evaluations included net CO 2 assimilation rate, stomatal conductance, transpiration rate, intercellular CO 2 concentration, chlorophyll indices, nitrogen balance, anthocyanin, and flavonoid content. The yacon’s survival limit under water deficit occurred at 200 kPa, when the plant reached the lowest assimilation rate (11.607 µmol CO 2 m −2 s −1 ), representing a 57.53% reduction in its photosynthetic capacity before dying under the 300 kPa tension. From 100 kPa tension, flavonoid production increased, indicating that yacon plants activated defense mechanisms to mitigate the effects of water stress. The highest photosynthetic rates in yacon were observed under higher water availability (lower tension, 20 kPa), close to the soil’s field capacity (10 kPa). In the first experiment, significant tuberous root production was observed only at 30 kPa, yielding approximately 1,100 g plant −1 . In the other treatments, fresh tuberous root production was around 100 g plant −1 , but without meeting commercial standards (small and very thin roots). In the second experiment, a linear decrease in production was observed as soil water availability declined. Overall, the production ranged from 1156.3 to 135.2 g plant −1 , between the highest and lowest water availability levels applied (tensions of 20 and 75 kPa, respectively), with a 16.05% reduction in yield for every 10 kPa increase in soil water tension. This result has the practical implication of demonstrating that yacon potato exhibits better physiological performance, and therefore the potential for higher productivity, when soil water availability is close to field capacity. This is a fundamental and guiding piece of information for irrigation management in yacon cultivation.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 42, e286663
Successive vegetable intercropping in organic system: agronomic and economic performance
Intercropping is a technique employed to increase productivity and profit per unit area in addition to maximizing the use of environmental resources and promoting ecological balance. Considering the advantages this practice can offer in vegetable cultivation, the present study aimed to evaluate the agronomic indices and profitability achieved through the cultivation of common kale intercropped with carrots and mustard in a crop succession system. The experiment was conducted using a randomized block design (RBD), with four replicates. The kale plots were arranged in a factorial scheme (2x2), considering: factor spacing for kale planting [E1 (1.00 x 0.50 m) and E2 (0.50 x 0.50 m)]; and the intercropping factor [presence and absence of intercropping (considering carrots first and then mustard)]. The carrot and mustard plots followed the RBD, with three cultivation systems (treatments): system 1 = monoculture; system 2 = intercropping with kale at E1; system 3 = intercropping with kale at E2. Throughout the kale cycle, carrots were replaced by mustard. The kale-carrot intercropping, succeeded by kale-mustard at the E1 spacing, showed good yield and land use efficiency of 184%, with greater profitability than monocultures. The kale-carrot intercropping, succeeded by kale-mustard at the E2 spacing, also showed agronomic efficiency (63%) and positive economic yield, but with lower profitability than monocultures.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 42, e286663
Open AccessSuccessive vegetable intercropping in organic system: agronomic and economic performance
Intercropping is a technique employed to increase productivity and profit per unit area in addition to maximizing the use of environmental resources and promoting ecological balance. Considering the advantages this practice can offer in vegetable cultivation, the present study aimed to evaluate the agronomic indices and profitability achieved through the cultivation of common kale intercropped with carrots and mustard in a crop succession system. The experiment was conducted using a randomized block design (RBD), with four replicates. The kale plots were arranged in a factorial scheme (2x2), considering: factor spacing for kale planting [E1 (1.00 x 0.50 m) and E2 (0.50 x 0.50 m)]; and the intercropping factor [presence and absence of intercropping (considering carrots first and then mustard)]. The carrot and mustard plots followed the RBD, with three cultivation systems (treatments): system 1 = monoculture; system 2 = intercropping with kale at E1; system 3 = intercropping with kale at E2. Throughout the kale cycle, carrots were replaced by mustard. The kale-carrot intercropping, succeeded by kale-mustard at the E1 spacing, showed good yield and land use efficiency of 184%, with greater profitability than monocultures. The kale-carrot intercropping, succeeded by kale-mustard at the E2 spacing, also showed agronomic efficiency (63%) and positive economic yield, but with lower profitability than monocultures.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 42, e284802
Stem diameter for Italian tomato grafting
The adoption of grafting in vegetable production is an innovative technique that presents challenges to be overcome, which one of the main ones is the need to determine the appropriate diameter of the plant at the time of grafting. Therefore, the objective of this work was to evaluate the development of seedlings and production of tomato plants, grafted with different stem diameters, under protected environmental conditions. The experiment was divided into two phases, seedling development and field production. The experimental design was completely randomized with five treatments, composed of the following seedlings stem diameters at the time of grafting: 1.8; 2.0; 2.2; 2.5 and 2.8 mm. Morphophysiological and productive characteristics of the grafted plants were evaluated. The results demonstrated that Italian tomato seedlings, grafted with 2.2 mm stem diameter, showed better development. However, the production rates were similar for the different stem diameters (1.8 to 2.8 mm) adopted at the grafting moment. Estimated yields of around 200 t/ha, much higher than the national average, demonstrate the success of the grafting technique in Italian tomatoes, under protected environmental conditions.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 42, e284802
Open AccessStem diameter for Italian tomato grafting
The adoption of grafting in vegetable production is an innovative technique that presents challenges to be overcome, which one of the main ones is the need to determine the appropriate diameter of the plant at the time of grafting. Therefore, the objective of this work was to evaluate the development of seedlings and production of tomato plants, grafted with different stem diameters, under protected environmental conditions. The experiment was divided into two phases, seedling development and field production. The experimental design was completely randomized with five treatments, composed of the following seedlings stem diameters at the time of grafting: 1.8; 2.0; 2.2; 2.5 and 2.8 mm. Morphophysiological and productive characteristics of the grafted plants were evaluated. The results demonstrated that Italian tomato seedlings, grafted with 2.2 mm stem diameter, showed better development. However, the production rates were similar for the different stem diameters (1.8 to 2.8 mm) adopted at the grafting moment. Estimated yields of around 200 t/ha, much higher than the national average, demonstrate the success of the grafting technique in Italian tomatoes, under protected environmental conditions.