B. A. Jaji
Research Subjects
B. A. Jaji has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
S.O. Adeoye
2 shared publicationsA.A. Adeyemo
Department of Physical & Chemical Sciences Federal University of Health Sciences Ila-Orangun
1 shared publication- B. B. Abdulganiyu
Department of Physical and Chemical Sciences Federal University of Health Sciences Ila-Orangun Kwara State Nigeria
1 shared publication F. Afolabi
Department of Physical & Chemical Sciences Federal University of Health Sciences Ila-Orangun
1 shared publication- Fatai Afolabi
Department of Physical and Chemical Sciences, Federal University of Health Sciences, Ila-Orangun, Nigeria
1 shared publication H.A. Sekoni
1 shared publication
Latest Publications
- Open Access
- 1 August 2025
- Published by African Journals Online (AJOL) in Journal of Applied Sciences and Environmental Management
- Vol. 29 (8) , 2627-2638
Synthesis, Characterization, and Adsorptive Performance of Zinc Oxide and Zinc Oxide–Cellulose Acetate Nanoparticles for the Removal of Zn²⁺, Pb²⁺, and Cd²⁺ from Aqueous Solutions
Heavy metal pollution, particularly by Zn²⁺, Pb²⁺, and Cd²⁺, presents a significant threat to aquatic ecosystems and public health. This study explores the preparation, characterization, and adsorption efficiency of zinc oxide (ZnO) nanoparticles and their cellulose acetate-based nanocomposite (ZnO–CA) to remove these toxic metal ions from aqueous solutions. Cellulose acetate was synthesized from sugarcane bagasse, an agricultural waste, while ZnO was produced via a modified co-precipitation method using various standard methods. The materials were characterized using FTIR, SEM, TEM, EDX, and BET surface area analysis. Batch adsorption experiments were conducted to evaluate the effects of pH, contact time, initial metal concentration, and adsorbent dosage. The ZnO–CA composite displayed a significantly enhanced BET surface area (197.43 m²/g) compared to pristine ZnO (109.64 m²/g), with improved porosity and surface chemistry. Maximum removal efficiencies were recorded at 99.81% for Pb²⁺, 97.32% for Cd²⁺, and 94.18% for Zn²⁺, with equilibrium achieved at 120 minutes. The adsorption process was pH-dependent and favored at values above the point of zero charge, while thermodynamic studies confirmed spontaneity and endothermicity. This research confirms that ZnO–CA nanocomposites are promising, low-cost, and environmentally friendly adsorbents. It is recommended that future work investigates regeneration and scale-up potential. This study contributes to sustainable water treatment strategies by valorizing biowaste into functional nanomaterials for effective heavy metal remediation.
- 1 August 2025
- Published by African Journals Online (AJOL) in Journal of Applied Sciences and Environmental Management
- Vol. 29 (8) , 2627-2638
Open AccessSynthesis, Characterization, and Adsorptive Performance of Zinc Oxide and Zinc Oxide–Cellulose Acetate Nanoparticles for the Removal of Zn²⁺, Pb²⁺, and Cd²⁺ from Aqueous Solutions
Heavy metal pollution, particularly by Zn²⁺, Pb²⁺, and Cd²⁺, presents a significant threat to aquatic ecosystems and public health. This study explores the preparation, characterization, and adsorption efficiency of zinc oxide (ZnO) nanoparticles and their cellulose acetate-based nanocomposite (ZnO–CA) to remove these toxic metal ions from aqueous solutions. Cellulose acetate was synthesized from sugarcane bagasse, an agricultural waste, while ZnO was produced via a modified co-precipitation method using various standard methods. The materials were characterized using FTIR, SEM, TEM, EDX, and BET surface area analysis. Batch adsorption experiments were conducted to evaluate the effects of pH, contact time, initial metal concentration, and adsorbent dosage. The ZnO–CA composite displayed a significantly enhanced BET surface area (197.43 m²/g) compared to pristine ZnO (109.64 m²/g), with improved porosity and surface chemistry. Maximum removal efficiencies were recorded at 99.81% for Pb²⁺, 97.32% for Cd²⁺, and 94.18% for Zn²⁺, with equilibrium achieved at 120 minutes. The adsorption process was pH-dependent and favored at values above the point of zero charge, while thermodynamic studies confirmed spontaneity and endothermicity. This research confirms that ZnO–CA nanocomposites are promising, low-cost, and environmentally friendly adsorbents. It is recommended that future work investigates regeneration and scale-up potential. This study contributes to sustainable water treatment strategies by valorizing biowaste into functional nanomaterials for effective heavy metal remediation.
- Open Access
- 1 November 2024
- Published by African Journals Online (AJOL) in Dutse Journal of Pure and Applied Sciences
- Vol. 10 (3b) , 124-137
Characterization and evaluation of physicochemical properties, phytochemicals and antimicrobial analysis of coconut oil
This study examines the physical and chemical properties, phytochemical makeup, and antibacterial activity of coconut oil, derived from the coconut kernel. The oil's acid value, saponification value, peroxide value, and iodine value were assessed to determine its quality and stability. The density and percentage of free fatty acid were also determined. A phytochemical analysis was conducted to identify bioactive substances like flavonoids and saponin, contributing to its potential for therapeutic use and health benefits. The antibacterial activity of coconut oil was assessed against various pathogenic microorganisms using standard disc diffusion and minimum inhibitory concentration methodologies. The findings demonstrate coconut oil's potential as a functional ingredient in various applications, highlighting its antibacterial characteristics, rich phytochemical profile, and physico-chemical stability. This comprehensive investigation supports the use of coconut oil for improving health and wellbeing.
- 1 November 2024
- Published by African Journals Online (AJOL) in Dutse Journal of Pure and Applied Sciences
- Vol. 10 (3b) , 124-137
Open AccessCharacterization and evaluation of physicochemical properties, phytochemicals and antimicrobial analysis of coconut oil
This study examines the physical and chemical properties, phytochemical makeup, and antibacterial activity of coconut oil, derived from the coconut kernel. The oil's acid value, saponification value, peroxide value, and iodine value were assessed to determine its quality and stability. The density and percentage of free fatty acid were also determined. A phytochemical analysis was conducted to identify bioactive substances like flavonoids and saponin, contributing to its potential for therapeutic use and health benefits. The antibacterial activity of coconut oil was assessed against various pathogenic microorganisms using standard disc diffusion and minimum inhibitory concentration methodologies. The findings demonstrate coconut oil's potential as a functional ingredient in various applications, highlighting its antibacterial characteristics, rich phytochemical profile, and physico-chemical stability. This comprehensive investigation supports the use of coconut oil for improving health and wellbeing.
- Open Access
- 25 October 2024
- Published by African Journals Online (AJOL) in Dutse Journal of Pure and Applied Sciences
- Vol. 10 (3a) , 107-119
Assessment of some chemical constituents in selected energy drinks in Ilorin, Nigeria
The study compared and evaluated the physicochemical characteristics and some chemical components of some energy drinks. Samples of five (5) different energy drink brands were bought at random. The physicochemical characteristics of all the samples (pH, turbidity, conductivity, and total dissolved solids), as well as the levels of aspartame, sugar, and caffeine, were examined. The physicochemical properties (pH, turbidity, conductivity, and total dissolved solids) were 4.47 ± 0.012 – 5.96 ± 0.012, 8 ± 0.577 – 592 ± 1.155 NTU, 2.21 ± 0.006 – 1975 ± 1.732 μs/cm, and 243 ± 0.577 – 1064 ± 0.577 mg/L, respectively. The values were found to be moderate and it was found to be within the FDA's suggested range. All energy drinks contained iron, calcium, zinc, and potassium, with concentrations ranging from 2.0 to 2500 mg/L, 2.763 ± 0.0009 - 19.310 ± 0.0015 mg/L, 0.045 ± 0.0001 - 13.887 ± 0.0037 mg/L, and 1.961 ± 0.0003 - 0.294 ± 0.0005 mg/L, respectively. Energy drinks had concentrations of copper, lead, and manganese ranging from 0.002 ± 0.0002 - 0.102 ± 0.0003 mg/L, 0.028 ± 0.0006 - 0.209 ± 0.0009 mg/L, and 0.003 ± 0.0001 - 0.024 ± 0.0002 mg/L, respectively. While lead had a value over the maximum contaminant level (MCL) of 0.01 mg/L, copper and manganese concentrations were below the maximum contaminant level of 1.0 mg/L and 0.05 mg/L, respectively. With the exception of sample E, which had a value of 0.102 ± 0.0003 mg/L and was higher than the maximum contaminant level (MCL) of 0.005 mg/L, cadmium was not found in any energy drink. The concentrations of sugar, aspartame, and caffeine were 1.11 mg/L to 2487.13 mg/L, 6.51 mg/L to 1491.19 mg/L, and 16.98 mg/L to 1686.73 mg/L, respectively. The amounts of aspartame and caffeine in each energy drink sample were less than the FDA's recommended levels of 400 mg/L and 3000 mg/L, respectively. It is crucial to keep an eye on the consumption pattern of these drinks in order to reduce the risk of consuming excessive amounts of dangerous ingredients and avoid the side effects that have been documented.
- 25 October 2024
- Published by African Journals Online (AJOL) in Dutse Journal of Pure and Applied Sciences
- Vol. 10 (3a) , 107-119
Open AccessAssessment of some chemical constituents in selected energy drinks in Ilorin, Nigeria
The study compared and evaluated the physicochemical characteristics and some chemical components of some energy drinks. Samples of five (5) different energy drink brands were bought at random. The physicochemical characteristics of all the samples (pH, turbidity, conductivity, and total dissolved solids), as well as the levels of aspartame, sugar, and caffeine, were examined. The physicochemical properties (pH, turbidity, conductivity, and total dissolved solids) were 4.47 ± 0.012 – 5.96 ± 0.012, 8 ± 0.577 – 592 ± 1.155 NTU, 2.21 ± 0.006 – 1975 ± 1.732 μs/cm, and 243 ± 0.577 – 1064 ± 0.577 mg/L, respectively. The values were found to be moderate and it was found to be within the FDA's suggested range. All energy drinks contained iron, calcium, zinc, and potassium, with concentrations ranging from 2.0 to 2500 mg/L, 2.763 ± 0.0009 - 19.310 ± 0.0015 mg/L, 0.045 ± 0.0001 - 13.887 ± 0.0037 mg/L, and 1.961 ± 0.0003 - 0.294 ± 0.0005 mg/L, respectively. Energy drinks had concentrations of copper, lead, and manganese ranging from 0.002 ± 0.0002 - 0.102 ± 0.0003 mg/L, 0.028 ± 0.0006 - 0.209 ± 0.0009 mg/L, and 0.003 ± 0.0001 - 0.024 ± 0.0002 mg/L, respectively. While lead had a value over the maximum contaminant level (MCL) of 0.01 mg/L, copper and manganese concentrations were below the maximum contaminant level of 1.0 mg/L and 0.05 mg/L, respectively. With the exception of sample E, which had a value of 0.102 ± 0.0003 mg/L and was higher than the maximum contaminant level (MCL) of 0.005 mg/L, cadmium was not found in any energy drink. The concentrations of sugar, aspartame, and caffeine were 1.11 mg/L to 2487.13 mg/L, 6.51 mg/L to 1491.19 mg/L, and 16.98 mg/L to 1686.73 mg/L, respectively. The amounts of aspartame and caffeine in each energy drink sample were less than the FDA's recommended levels of 400 mg/L and 3000 mg/L, respectively. It is crucial to keep an eye on the consumption pattern of these drinks in order to reduce the risk of consuming excessive amounts of dangerous ingredients and avoid the side effects that have been documented.