MSMuhammad Usman Siddiq

Muhammad Usman Siddiq

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muhammad Usman Siddiq has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Numerical Investigation of Fatigue Crack Propagation in High-Performance Aluminum Alloys

    by Mohammad Ashraf Hossain, Muhammad Usman Siddiq, Jahanzeb Javed, Moneef Mohamed Elobaid Musa

    This work presents ANSYS Workbench simulations analyzing fatigue crack propagation in high-performance aluminum alloys 2524-T3, 2024-T42, and 2024-T351 under stress ratios R = 0.1, 0.3, and 0.5 using pre-meshed crack tools and SMART Fracture automation. Key simulation outputs include crack length evolution, cycle count, equivalent stress intensity factor ranges (ΔK), and crack resistance curves (Kr). At R = 0.1, 2524-T3 exhibited the highest crack growth rate (da/dN = 3.20×10⁻⁸ mm/cycle, ΔK = 7.28 MPa√m, Nf ≈ 459×10⁶ cycles), while 2024-T351 showed the lowest rate (da/dN = 2.76×10⁻⁹ mm/cycle, ΔK = 1.65 MPa√m, Nf ≈ 5.27×10⁹ cycles) — a 10.4-fold reduction in da/dN and 11.5-fold increase in fatigue life. At R = 0.5, 2024-T351 achieved da/dN < 1.0×10⁻⁸ mm/cycle with Nf > 6×10⁹ cycles, outperforming 2024-T42 (da/dN = 3.82×10⁻⁹ mm/cycle, Nf ≈ 2.92×10⁹) and 2524-T3 (da/dN = 2.76×10⁻⁹ mm/cycle, Nf ≈ 5.27×10⁹). Kr curve analysis revealed steep resistance decay for 2524-T3 (R = 0.1), stable plateau behavior for 2024-T42 (R = 0.3–0.5), and rising Kr trends for 2024-T351 across all R-ratios, indicating active crack-tip shielding mechanisms. SEM fractography validated simulation trends: 2524-T3 showed brittle trans granular features with secondary crack density of 12.3 ± 2.1 cracks/mm²; 2024-T42 exhibited mixed-mode fracture with moderate dimple density (8.7 ± 1.4 μm⁻²); 2024-T351 displayed ductile dimple morphology with the highest dimple density (18.4 ± 2.6 μm⁻²) and minimal secondary cracking (2.1 ± 0.8 cracks/mm²). These microstructural metrics confirm 2024-T351 as the optimal candidate for fatigue-critical aerospace and automotive applications.

  • Open Access

    Utilization of Waste Toner as a Sustainable Modifier in Asphalt Binder: Experimental Investigation and ANN-Based Performance Evaluation

    by Zhengyu Wu, Jahanzeb Javed, Muhammad Usman Siddiq, Muhammad Ahmed Qurashi, Ping Lyu

    The increasing generation of waste toner from printers and photocopiers presents significant environmental and disposal challenges. This study investigates the feasibility of utilizing waste toner as a modifier in asphalt binder to enhance performance and sustainability. Bitumen with a penetration grade of 60/70 was modified with waste toner at varying contents (0–30%). The modified binders were evaluated using penetration, ductility, and softening-point tests to assess their physical behavior. Results indicate that increasing toner content reduces penetration and ductility while improving the softening point, indicating enhanced temperature resistance. Furthermore, asphalt mixtures were evaluated using both destructive (Marshall stability) and non-destructive testing (ultrasonic pulse velocity) methods to provide a comprehensive performance assessment. In addition, an artificial neural network (ANN) model was developed to predict and evaluate the performance of toner-modified mixtures. The findings demonstrate that waste toner can be effectively used as a sustainable modifier in asphalt mixtures, thereby improving material performance and reducing environmental impact.


  • Open Access

    Evaluation of the Durability of a Waste Plastic–Enhanced Asphalt Road Pavement in Extreme Future London Weather Conditions

    by K. Kan, O. O. Ajibade, I. Chaer, C. Gray, M. U. Siddiq

    Climate change is increasing the frequency and intensity of extreme weather events, posing challenges to the durability of asphalt road pavement systems. Incorporating waste plastics, such as polyethylene terephthalate (PET), into asphalt mixtures has been proposed as a potential approach to reduce bitumen demand and modify mechanical performance; however, the response of such mixtures to future extreme climatic conditions remains insufficiently understood. This study examines the durability of PET‐modified asphalt under predicted future extreme winter, summer and seasonal weather conditions. A real‐time ageing method, defined as mimicking the daily fluctuation of extreme London weather, was employed. It consists of ten time‐varying temperature cycles representing freeze–thaw, freeze–heat and extreme heat conditions. These cycles were implemented in an environmental chamber and parameterised using ARIMA‐based projections and controlled laboratory simulations with thermal cycling calibrated against projected future London weather scenarios. Asphalt mixtures containing PET were compared with a control mixture without PET under identical conditioning protocols. Performance was evaluated using the Marshall asphalt mix method, with stability, flow, density, air voids and volumetric properties (VFA and VMA) assessed. The results indicate that, after ten freeze–thaw cycles, the PET‐modified mixture exhibited approximately 15% higher Marshall stability and up to 50% higher flow values relative to the corresponding aged control mixture, with absolute stability values remaining within acceptable specification limits. These findings suggest that PET modification can influence the mechanical response of asphalt under short‐term simulated extreme weather exposure. Overall, the study provides preliminary laboratory‐scale evidence that PET‐modified asphalt may exhibit altered durability characteristics under projected future climatic conditions. While the results are limited by the sample size and ageing duration, they offer initial insights into the potential role of waste PET in asphalt mixtures and highlight the need for longer‐term ageing studies and field validation before broader conclusions can be drawn regarding long‐term performance or waste‐management impacts.

  • Open Access

    Fragility and Seismic Performance Assessment of RC Frames Under Chinese and Pakistani Building Codes

    by Muhammad Usama Aslam, Tariq Umar, Musaab Suliman, Muhammad Usman Siddiq, Hamid Rajabnejad, Ambar Farooq

    The increasing integration of Chinese-engineered infrastructure in Pakistan under the China–Pakistan Economic Corridor (CPEC) necessitates a comparative evaluation of seismic resilience between the Chinese and Pakistani building codes. This study focused on the seismic performance of reinforced concrete (RC) frames designed according to these two codes. Fragility curves were generated for 4-story, 8-story, and 12-story buildings subjected to varying seismic intensities using Incremental Dynamic Analysis (IDA). The results indicate that structures designed under the Chinese code exhibit up to 12% lower fragility values, suggesting enhanced seismic resilience, particularly at higher seismic intensities. Additionally, the study investigates the effectiveness of Lead Rubber Bearings (LRBs) for seismic isolation, demonstrating that their integration improves the seismic performance of RC frames by enhancing energy dissipation and reducing the likelihood of exceeding various damage states by up to 25%. These findings underscore the importance of adopting stringent seismic design provisions, such as those found in the Chinese code, to enhance the resilience and safety of infrastructure, especially in seismic-prone regions.

  • Open Access

    Performance Evaluation of Waste Toner and Recycled LDPE-Modified Asphalt Pavement: A Mechanical and Carbon Assessment-Based Optimization Approach Towards Sustainability

    by Muhammad Usman Siddiq, Muhammad Kashif Anwar, Faris H. Almansour, Jahanzeb Javed, Muhammad Ahmed Qurashi

    Due to the increasing environmental concerns and the growing generation of electronic waste and plastic, sustainable waste management solutions are essential for the construction industry. This study explores the potential of using electronic waste toner powder (WTP) and recycled low-density polyethylene (LDPE), either individually or in combination as modifiers for asphalt binder to enhance pavement performance and reduce environmental impact. The analysis focused on three key components: (1) binder development and testing; (2) performance evaluation through Marshall stability, indirect tensile strength, and Dynamic Shear Rheometer (DSR) testing for rutting resistance; and (3) sustainability assessment in terms of carbon footprint reduction. The results revealed that the formulation of 25% WTP and 8% LDPE processed at 160 °C achieved the best mechanical performance and lowest carbon index, enhancing Marshall stability by 32% and rutting resistance by 41%. Additionally, this formulation reduced the carbon footprint by 27% compared to conventional asphalt. The study demonstrated that the combination of WTP and LDPE significantly improves the sustainability and performance of asphalt pavements, offering mechanical, environmental, and economic benefits. By providing a quantitative assessment of waste-modified asphalt, this study uniquely demonstrates the combined use of WTP and LDPE in asphalt, offering a novel dual-waste valorization approach that enhances pavement performance while promoting circular economy practices.


  • Open Access

    AI-Driven Optimization of Fly Ash-Based Geopolymer Concrete for Sustainable High Strength and CO2 Reduction: An Application of Hybrid Taguchi–Grey–ANN Approach

    by Muhammad Usman Siddiq, Muhammad Kashif Anwar, Faris H. Almansour, Muhammad Ahmed Qurashi, Muhammad Adeel

    The construction industry urgently requires sustainable alternatives to conventional concrete to reduce its environmental impact. This study addresses this challenge by developing machine learning-optimized geopolymer concrete (GPC) using industrial waste fly ash as cement replacement. An integrated Taguchi–Grey relational analysis (GRA) and artificial neural network (ANN) approach was developed to simultaneously optimize mechanical properties and environmental performance. The methodology analyzes over 1000 data points from 83 studies to identify key mix parameters including fly ash content, NaOH/Na2SiO3 ratio, and curing conditions. Results indicate that the optimized FA-GPC formulation achieves a 78% reduction in CO2 emissions, decreasing from 252.09 kg/m3 (GRC rank 1) to 55.0 kg/m3, while maintaining a compressive strength of 90.9 MPa. The ANN model demonstrates strong predictive capability, with R2 > 0.95 for strength and environmental impact. Life cycle assessment reveals potential savings of 3941 tons of CO2 over 20 years for projects using 1000 m3 annually. This research provides a data-driven framework for sustainable concrete design, offering practical mix design guidelines and demonstrating the viability of fly ash-based GPC as high-performance, low-carbon construction material.