Hajun Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hajun Song has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Jong-In Song
School of Electrical Engineering and Computer Science, Gwangju Institute of Science and Technology, Gwangju, South Korea
4 shared publications Sejin Hwang
Department of Information and Communications, Gwangju Institute of Science and Technology (GIST), 1 Oryongdong, Buk-gu, Gwangju, 500-712, South Korea
3 shared publicationsHansol Jang
2 shared publications- Heesuk Jang
4th Research and Development Institute, Agency for Defense Development, Yuseong, Daejeon, South Korea
2 shared publications Jong-In Song
Gwangju Inst of Science and Technology, Korea (the Republic of)
2 shared publicationsChang Jae Lee
Ground Technology Research Institute, Agency for Defence Development (ADD), Daejeon 34060, South Korea
1 shared publication
Latest Publications
- 28 August 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (9) , 2630
Evaluation of daylight background noise for satellite-to-ground free-space optical communication during daytime operation
There is growing global interest in establishing free-space optical (FSO) communication links, such as ground-satellite links (GSLs) of at least hundreds of kilometers, intersatellite links of thousands of kilometers, and future deep space links of much greater dimensions. Enabling outdoor wireless FSO communication systems to be utilized during daylight hours can increase their availability in space-air-ground networks; however, this is usually accompanied by incoherent background radiation that impairs the signal-to-noise ratio (SNR) and bit error rate (BER). Therefore, a preliminary review of the background noise is required before constructing ground terminals with a suitable SNR in a harsh environment with high levels of solar noise. Herein, we evaluated the background noise that sunlight provides to ground terminals and quantitatively examined its impact on the SNR, communication performance, and beacon detection accuracy of the developed all-free-space ground terminal. Furthermore, we present the results of a daytime demonstration of a 7-km terrestrial free-space optical communication link by employing our ground terminal that was designed based on these analyses. The results verified that 2.5-Gbps data transmission up to 7 km is feasible, even in expected daytime satellite tracking scenarios with high background noise, by the developed system with spectral and spatial filtering to achieve an acceptable SNR. The background noise results of our research are anticipated to further the research on quantum communication networks, light detection and ranging (LiDAR), and green energy technologies.
- 28 August 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (9) , 2630
Evaluation of daylight background noise for satellite-to-ground free-space optical communication during daytime operation
There is growing global interest in establishing free-space optical (FSO) communication links, such as ground-satellite links (GSLs) of at least hundreds of kilometers, intersatellite links of thousands of kilometers, and future deep space links of much greater dimensions. Enabling outdoor wireless FSO communication systems to be utilized during daylight hours can increase their availability in space-air-ground networks; however, this is usually accompanied by incoherent background radiation that impairs the signal-to-noise ratio (SNR) and bit error rate (BER). Therefore, a preliminary review of the background noise is required before constructing ground terminals with a suitable SNR in a harsh environment with high levels of solar noise. Herein, we evaluated the background noise that sunlight provides to ground terminals and quantitatively examined its impact on the SNR, communication performance, and beacon detection accuracy of the developed all-free-space ground terminal. Furthermore, we present the results of a daytime demonstration of a 7-km terrestrial free-space optical communication link by employing our ground terminal that was designed based on these analyses. The results verified that 2.5-Gbps data transmission up to 7 km is feasible, even in expected daytime satellite tracking scenarios with high background noise, by the developed system with spectral and spatial filtering to achieve an acceptable SNR. The background noise results of our research are anticipated to further the research on quantum communication networks, light detection and ranging (LiDAR), and green energy technologies.
- Open Access
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Design and Implementation of Eye-Safe Band LiDAR System Based on Solid-State Photomultiplier for Kilometer-Range Applications
Light detection and ranging (LiDAR) technology is increasingly being applied to several fields, including defense surveillance and reconnaissance, where it is used to detect small objects at long ranges. In these scenarios, highly sensitive detection capabilities are essential, for which high-power lasers can be employed. In particular, the 1550 nm wavelength band offers the advantage of being eye-safe, allowing for increased laser output. However, because increasing the laser output requires a larger system size and higher power consumption, this approach has inherent limitations. In this study, we implemented a small payload (<2 kg) LiDAR system based on a solid-state photomultiplier (SSPM), which has high sensitivity at 1550 nm. The experimental results demonstrated that the SSPM provides high sensitivity, detecting signals below −50.9 dBm with a low false alarm rate of 0.0014%. Although background light can potentially increase false alarms, this effect is mitigated by using optical filters. Therefore, the proposed detection scheme based on the SSPM can generate point cloud images without the need for complex post-processing or calculations to mitigate speckle noise. We tested the feasibility of the SSPM as a high-sensitivity photodetector for the LiDAR system by designing and implementing a compact SSPM-based LiDAR system. The experimental results confirmed that an object with a reflectivity of 9% and located 801.22 m away could be detected using the proposed LiDAR system only with a peak power of 3.5 kW and receiver aperture diameter of 2 cm. Moreover, a kilometer-range (1,145.71 m) image was successfully acquired using the proposed LiDAR system with the same parameters.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Open AccessDesign and Implementation of Eye-Safe Band LiDAR System Based on Solid-State Photomultiplier for Kilometer-Range Applications
Light detection and ranging (LiDAR) technology is increasingly being applied to several fields, including defense surveillance and reconnaissance, where it is used to detect small objects at long ranges. In these scenarios, highly sensitive detection capabilities are essential, for which high-power lasers can be employed. In particular, the 1550 nm wavelength band offers the advantage of being eye-safe, allowing for increased laser output. However, because increasing the laser output requires a larger system size and higher power consumption, this approach has inherent limitations. In this study, we implemented a small payload (<2 kg) LiDAR system based on a solid-state photomultiplier (SSPM), which has high sensitivity at 1550 nm. The experimental results demonstrated that the SSPM provides high sensitivity, detecting signals below −50.9 dBm with a low false alarm rate of 0.0014%. Although background light can potentially increase false alarms, this effect is mitigated by using optical filters. Therefore, the proposed detection scheme based on the SSPM can generate point cloud images without the need for complex post-processing or calculations to mitigate speckle noise. We tested the feasibility of the SSPM as a high-sensitivity photodetector for the LiDAR system by designing and implementing a compact SSPM-based LiDAR system. The experimental results confirmed that an object with a reflectivity of 9% and located 801.22 m away could be detected using the proposed LiDAR system only with a peak power of 3.5 kW and receiver aperture diameter of 2 cm. Moreover, a kilometer-range (1,145.71 m) image was successfully acquired using the proposed LiDAR system with the same parameters.
- 11 February 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (4) , 7058-7071
Performance evaluation of free space optical communication terminal with local weather considerations
Terrestrial free space optical communication (FSOC) has attracted significant attention in recent years due to its numerous advantages. However, its performance is highly susceptible to environmental conditions. This paper introduces a methodology for evaluating the performance of the FSOC terminal with consideration of local weather conditions and validates this approach using a developed FSOC terminal. By leveraging meteorological data to estimate the refractive index structure constant (C n 2) for specific regions and applying a gamma-gamma channel model, turbulence-induced fading is assessed. The suitability of these models is confirmed through measurements of the received signal strength indicator at the FSOC terminal developed by us, which enables an estimation of the outage probability of the FSOC link. Additionally, through experimental verification of the terminal under domestic weather conditions, the impact of turbulence-induced fading on single-channel transmission according to the 2.5 GBASE-T Ethernet standard is demonstrated on a free-space optical link of over 5.8 km.
- 11 February 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (4) , 7058-7071
Performance evaluation of free space optical communication terminal with local weather considerations
Terrestrial free space optical communication (FSOC) has attracted significant attention in recent years due to its numerous advantages. However, its performance is highly susceptible to environmental conditions. This paper introduces a methodology for evaluating the performance of the FSOC terminal with consideration of local weather conditions and validates this approach using a developed FSOC terminal. By leveraging meteorological data to estimate the refractive index structure constant (C n 2) for specific regions and applying a gamma-gamma channel model, turbulence-induced fading is assessed. The suitability of these models is confirmed through measurements of the received signal strength indicator at the FSOC terminal developed by us, which enables an estimation of the outage probability of the FSOC link. Additionally, through experimental verification of the terminal under domestic weather conditions, the impact of turbulence-induced fading on single-channel transmission according to the 2.5 GBASE-T Ethernet standard is demonstrated on a free-space optical link of over 5.8 km.
- Open Access
- 1 December 2019
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 90 (12) , 125001
Implementation of a pulse-type laser detection and ranging system based on heterodyne detection for long-range measurement with high repetition rate
This paper presents the implementation of a pulse-type LAser Detection And Ranging (LADAR) system based on heterodyne detection for long-range measurement. A pulse-type LADAR based on an intensity direct-detection is certainly simple and mature, but it requires a high peak-power laser and a low-noise avalanche photodiode for long-range measurement, which restricts the scope of the application due to the weight, power consumption, and cost of the laser and the photodetector. In this work, heterodyne detection using a PIN photodiode is implemented to increase receiver sensitivity instead of using a low-noise avalanche photodiode. An optical phase-locked loop is adopted to generate an optical local oscillator signal for heterodyne detection. The proposed heterodyne detection scheme achieves a minimum detectable signal level of −52.6 dBm at a bandwidth of 1.2 GHz, and it is adopted in a pulse-type LADAR system for long-range measurement. The pulse-type LADAR system can measure a distance of 2.77 km at a repetition rate of 40 kHz, and it demonstrates great advantages for realizing real-time 3D imaging for long-range measurement with a high frame rate.
- 1 December 2019
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 90 (12) , 125001
Open AccessImplementation of a pulse-type laser detection and ranging system based on heterodyne detection for long-range measurement with high repetition rate
This paper presents the implementation of a pulse-type LAser Detection And Ranging (LADAR) system based on heterodyne detection for long-range measurement. A pulse-type LADAR based on an intensity direct-detection is certainly simple and mature, but it requires a high peak-power laser and a low-noise avalanche photodiode for long-range measurement, which restricts the scope of the application due to the weight, power consumption, and cost of the laser and the photodetector. In this work, heterodyne detection using a PIN photodiode is implemented to increase receiver sensitivity instead of using a low-noise avalanche photodiode. An optical phase-locked loop is adopted to generate an optical local oscillator signal for heterodyne detection. The proposed heterodyne detection scheme achieves a minimum detectable signal level of −52.6 dBm at a bandwidth of 1.2 GHz, and it is adopted in a pulse-type LADAR system for long-range measurement. The pulse-type LADAR system can measure a distance of 2.77 km at a repetition rate of 40 kHz, and it demonstrates great advantages for realizing real-time 3D imaging for long-range measurement with a high frame rate.
- Open Access
- 16 August 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (17) , 20718-20726
Continuous-wave THz vector imaging system utilizing two-tone signal generation and self-mixing detection
We propose and demonstrate a continuous-wave vector THz imaging system utilizing a photonic generation of two-tone THz signals and self-mixing detection. The proposed system measures amplitude and phase information simultaneously without the local oscillator reference or phase rotation scheme that is required for heterodyne or homodyne detection. In addition, 2π phase ambiguity that occurs when the sample is thicker than the wavelength of THz radiation can be avoided. In this work, THz signal having two frequency components was generated with a uni-traveling-carrier photodiode and electro-optic modulator on the emitter side and detected with a Schottky barrier diode detector used as a self-mixer on the receiver side. The proposed THz vector imaging system exhibited a 50-dB signal to noise ratio and 0.012-rad phase fluctuation with 100-μs integration time at 325-GHz. With the system, we demonstrate two-dimensional THz phase contrast imaging. Considering the recent use of two-dimensional arrays of Schottky barrier diodes as a THz image sensor, the proposed system is greatly advantageous for realizing a real-time THz vector imaging system due to its simple receiver configuration.
- 16 August 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (17) , 20718-20726
Open AccessContinuous-wave THz vector imaging system utilizing two-tone signal generation and self-mixing detection
We propose and demonstrate a continuous-wave vector THz imaging system utilizing a photonic generation of two-tone THz signals and self-mixing detection. The proposed system measures amplitude and phase information simultaneously without the local oscillator reference or phase rotation scheme that is required for heterodyne or homodyne detection. In addition, 2π phase ambiguity that occurs when the sample is thicker than the wavelength of THz radiation can be avoided. In this work, THz signal having two frequency components was generated with a uni-traveling-carrier photodiode and electro-optic modulator on the emitter side and detected with a Schottky barrier diode detector used as a self-mixer on the receiver side. The proposed THz vector imaging system exhibited a 50-dB signal to noise ratio and 0.012-rad phase fluctuation with 100-μs integration time at 325-GHz. With the system, we demonstrate two-dimensional THz phase contrast imaging. Considering the recent use of two-dimensional arrays of Schottky barrier diodes as a THz image sensor, the proposed system is greatly advantageous for realizing a real-time THz vector imaging system due to its simple receiver configuration.
- Open Access
- 10 May 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (10) , 11767-11777
Optical frequency switching scheme for a high-speed broadband THz measurement system based on the photomixing technique
This study presents an optical frequency switching scheme for a high-speed broadband terahertz (THz) measurement system based on the photomixing technique. The proposed system can achieve high-speed broadband THz measurements using narrow optical frequency scanning of a tunable laser source combined with a wavelength-switchable laser source. In addition, this scheme can provide a larger output power of an individual THz signal compared with that of a multi-mode THz signal generated by multiple CW laser sources. A swept-source THz tomography system implemented with a two-channel wavelength-switchable laser source achieves a reduced time for acquisition of a point spread function and a higher depth resolution in the same amount of measurement time compared with a system with a single optical source.
- 10 May 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (10) , 11767-11777
Open AccessOptical frequency switching scheme for a high-speed broadband THz measurement system based on the photomixing technique
This study presents an optical frequency switching scheme for a high-speed broadband terahertz (THz) measurement system based on the photomixing technique. The proposed system can achieve high-speed broadband THz measurements using narrow optical frequency scanning of a tunable laser source combined with a wavelength-switchable laser source. In addition, this scheme can provide a larger output power of an individual THz signal compared with that of a multi-mode THz signal generated by multiple CW laser sources. A swept-source THz tomography system implemented with a two-channel wavelength-switchable laser source achieves a reduced time for acquisition of a point spread function and a higher depth resolution in the same amount of measurement time compared with a system with a single optical source.
- 7 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 28 (23) , 2740-2743
Optoelectronic Feedback Loop for Phase Noise Suppression in THz Self-Heterodyne Detection
A novel terahertz (THz) self-heterodyne detection system using an optoelectronic feedback loop is proposed. Conventional THz self-heterodyne detection system is inherently vulnerable to phase noise associated with the optical path length difference between the laser sources and the photomixer. The proposed THz self-heterodyne detection system utilizes the optoelectronic feedback loop to suppress the phase noise of the intermediate frequency signal at the output of the photomixer. The optoelectronic feedback loop requires a feedback loop with a relatively small loop bandwidth and thus is implemented without using rather sophisticated integrated photonics technology. The proposed THz self-heterodyne detection system with the optoelectronic feedback loop suppresses the phase noise by more than 25 dB.
- 7 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 28 (23) , 2740-2743
Optoelectronic Feedback Loop for Phase Noise Suppression in THz Self-Heterodyne Detection
A novel terahertz (THz) self-heterodyne detection system using an optoelectronic feedback loop is proposed. Conventional THz self-heterodyne detection system is inherently vulnerable to phase noise associated with the optical path length difference between the laser sources and the photomixer. The proposed THz self-heterodyne detection system utilizes the optoelectronic feedback loop to suppress the phase noise of the intermediate frequency signal at the output of the photomixer. The optoelectronic feedback loop requires a feedback loop with a relatively small loop bandwidth and thus is implemented without using rather sophisticated integrated photonics technology. The proposed THz self-heterodyne detection system with the optoelectronic feedback loop suppresses the phase noise by more than 25 dB.
- 1 January 2016
- Published by Optica Publishing Group
- p. SM1L.7
Terahertz tomography system using self-heterodyne detection with phase noise compensation
We propose a Terahertz tomography system using self-heterodyne detection with phase noise compensation. The phase noise compensation actively reduces phase noise from laser sources and offers improved resolution and reproducibility of the tomography system.
- 1 January 2016
- Published by Optica Publishing Group
- p. SM1L.7
Terahertz tomography system using self-heterodyne detection with phase noise compensation
We propose a Terahertz tomography system using self-heterodyne detection with phase noise compensation. The phase noise compensation actively reduces phase noise from laser sources and offers improved resolution and reproducibility of the tomography system.
- 9 December 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 28 (3) , 363-366
Terahertz-Wave Vibrometer Using a Phase-Noise-Compensated Self-Heterodyne System
A terahertz (THz) vibrometer based on a photomixing self-heterodyne system for measuring the vibration of an object behind an opaque barrier is reported. The proposed THz vibrometer employs a phase noise compensation technique to reduce the phase noise of the system and thereby improves the signal-to-noise ratio (SNR) of the system. In this letter, the performance of THz vibrometers with and without the phase noise compensation technique is compared. The proposed THz vibrometer employing a phase noise compensation technique shows an improved SNR and larger bandwidth compared with those of the conventional THz vibrometer using a Golay cell.
- 9 December 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 28 (3) , 363-366
Terahertz-Wave Vibrometer Using a Phase-Noise-Compensated Self-Heterodyne System
A terahertz (THz) vibrometer based on a photomixing self-heterodyne system for measuring the vibration of an object behind an opaque barrier is reported. The proposed THz vibrometer employs a phase noise compensation technique to reduce the phase noise of the system and thereby improves the signal-to-noise ratio (SNR) of the system. In this letter, the performance of THz vibrometers with and without the phase noise compensation technique is compared. The proposed THz vibrometer employing a phase noise compensation technique shows an improved SNR and larger bandwidth compared with those of the conventional THz vibrometer using a Golay cell.
- Open Access
- 5 August 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (16) , 21181-21192
Robust terahertz self-heterodyne system using a phase noise compensation technique
We propose and demonstrate a robust terahertz self-heterodyne system using a phase noise compensation technique. Conventional terahertz self-heterodyne systems suffer from degraded phase noise performance due to phase noise of the laser sources. The proposed phase noise compensation technique uses an additional photodiode and a simple electric circuit to produce phase noise identical to that observed in the terahertz signal produced by the self-heterodyne system. The phase noise is subsequently subtracted from the terahertz signal produced by the self-heterodyne system using a lock-in amplifier. While the terahertz self-heterodyne system using a phase noise compensation technique offers improved phase noise performance, it also provides a reduced phase drift against ambient temperature variations. The terahertz self-heterodyne system using a phase noise compensation technique shows a phase noise of 0.67 degree in terms of a standard deviation value even without using overall delay balance control. It also shows a phase drift of as small as approximately 10 degrees in an open-to-air measurement condition without any strict temperature control.
- 5 August 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (16) , 21181-21192
Open AccessRobust terahertz self-heterodyne system using a phase noise compensation technique
We propose and demonstrate a robust terahertz self-heterodyne system using a phase noise compensation technique. Conventional terahertz self-heterodyne systems suffer from degraded phase noise performance due to phase noise of the laser sources. The proposed phase noise compensation technique uses an additional photodiode and a simple electric circuit to produce phase noise identical to that observed in the terahertz signal produced by the self-heterodyne system. The phase noise is subsequently subtracted from the terahertz signal produced by the self-heterodyne system using a lock-in amplifier. While the terahertz self-heterodyne system using a phase noise compensation technique offers improved phase noise performance, it also provides a reduced phase drift against ambient temperature variations. The terahertz self-heterodyne system using a phase noise compensation technique shows a phase noise of 0.67 degree in terms of a standard deviation value even without using overall delay balance control. It also shows a phase drift of as small as approximately 10 degrees in an open-to-air measurement condition without any strict temperature control.