Soumi Pal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Soumi Pal has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Arpit Khandelwal
Department of Electrical Engineering, Indian Institute of Technology Jodhpur, Jodhpur, Rajasthan, India
3 shared publications - Nitin Bhatia
Indian Institute of Technology Jodhpur
2 shared publications Nitin Bhatia
Department of Electrical Engineering, Indian Institute of Technology Jodhpurhttps://ror.org/03yacj906, Rajasthan, 342030, India
1 shared publication
Latest Publications
- 7 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (6) , 1-11
Vector Vortex Beam Emission Using Higher Order Transverse Modes in a Buried Heterostructure Laser
The 2D buried heterostructure (BH) laser with a symmetric transverse refractive index profile can generate radial and azimuthal polarized vector vortex beam (VVB) by exploiting the orthogonally polarized higher order transverse modes in pairs. We investigate the optimal structure and operating conditions for the stable generation of dual polarized modes under practical operating conditions, including gain saturation, spontaneous emission, carrier diffusion, and polarization sensitivity. As the corresponding BH laser supports higher order transverse modes, the dimensions of the active layers become larger than the diffusion length of the semiconductor. Thus, for the first time, we introduce the 2D diffusion model into the laser rate equation for higher order transverse modes. We show that the dynamic nature of the laser, due to nonlinear gain saturation and mode polarization, is suppressed by diffusion, resulting in more stable output under various operating conditions.
- 7 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (6) , 1-11
Vector Vortex Beam Emission Using Higher Order Transverse Modes in a Buried Heterostructure Laser
The 2D buried heterostructure (BH) laser with a symmetric transverse refractive index profile can generate radial and azimuthal polarized vector vortex beam (VVB) by exploiting the orthogonally polarized higher order transverse modes in pairs. We investigate the optimal structure and operating conditions for the stable generation of dual polarized modes under practical operating conditions, including gain saturation, spontaneous emission, carrier diffusion, and polarization sensitivity. As the corresponding BH laser supports higher order transverse modes, the dimensions of the active layers become larger than the diffusion length of the semiconductor. Thus, for the first time, we introduce the 2D diffusion model into the laser rate equation for higher order transverse modes. We show that the dynamic nature of the laser, due to nonlinear gain saturation and mode polarization, is suppressed by diffusion, resulting in more stable output under various operating conditions.
- 22 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (3) , 1-10
Stable Dual Wavelength Emission From the Buried Heterostructure Laser Using Reflectivity Modification Method for Microwave Generation
We show that the stable dual mode emission, characterized by different polarization of the modes, requires the buried heterostructure (BH) laser to operate in the linear gain region above the threshold; however, not reaching the saturation levels. Additionally, the laser must operate in the weak coupling regime where the self-gain saturation coefficient must be larger than that of the cross-gain coefficient. Furthermore, the method of reflectivity modification has been applied to achieve the dual mode emission at much lower pump current values. The dual mode output is targeted towards the generation of microwave signals using the optical heterodyning method. Various practical issues, such as the implementation mechanism of this method, the impact of spontaneous emission, and the corresponding phase noise performance of the resultant microwave signal, are also discussed.
- 22 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (3) , 1-10
Stable Dual Wavelength Emission From the Buried Heterostructure Laser Using Reflectivity Modification Method for Microwave Generation
We show that the stable dual mode emission, characterized by different polarization of the modes, requires the buried heterostructure (BH) laser to operate in the linear gain region above the threshold; however, not reaching the saturation levels. Additionally, the laser must operate in the weak coupling regime where the self-gain saturation coefficient must be larger than that of the cross-gain coefficient. Furthermore, the method of reflectivity modification has been applied to achieve the dual mode emission at much lower pump current values. The dual mode output is targeted towards the generation of microwave signals using the optical heterodyning method. Various practical issues, such as the implementation mechanism of this method, the impact of spontaneous emission, and the corresponding phase noise performance of the resultant microwave signal, are also discussed.
- 8 May 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (14) , 3955-3964
Theoretical analysis of the buried heterostructure laser for stable dual-wavelength generation
Stable dual-wavelength emission from a laser is desirable for microwave signal generation using the optical heterodyning method. As both optical wavelengths are generated from the same cavity, the phase noise of the generated microwave signal is minimized. In this work, we exploit the inherent birefringence in the buried heterostructure semiconductor laser to generate dual polarized modes. We carefully analyze the mode competition between various modes in the cavity and propose the desirable gain modification conditions for stable dual mode oscillations when the laser is operating near the threshold. We show that the required asymmetry in the gain for two stable modes can be obtained from the mode confinement factors and facet losses. We also show the applicability of our results to a homogeneously broadened multimode laser.
- 8 May 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (14) , 3955-3964
Theoretical analysis of the buried heterostructure laser for stable dual-wavelength generation
Stable dual-wavelength emission from a laser is desirable for microwave signal generation using the optical heterodyning method. As both optical wavelengths are generated from the same cavity, the phase noise of the generated microwave signal is minimized. In this work, we exploit the inherent birefringence in the buried heterostructure semiconductor laser to generate dual polarized modes. We carefully analyze the mode competition between various modes in the cavity and propose the desirable gain modification conditions for stable dual mode oscillations when the laser is operating near the threshold. We show that the required asymmetry in the gain for two stable modes can be obtained from the mode confinement factors and facet losses. We also show the applicability of our results to a homogeneously broadened multimode laser.