Changyi Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Changyi Pan has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Changlong Liu
College of Physics and Optoelectronic Engineering, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou, China
3 shared publications - Guanhai Li
State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China
2 shared publications - Sheng Ni
College of Physics and Optoelectronic Engineering, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, No. 1, Sub-Lane Xiangshan, Xihu District, Hangzhou 310024, China
2 shared publications - Shian Mi
College of Physics and Optoelectronic Engineering, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, No. 1, Sub-Lane Xiangshan, Xihu District, Hangzhou 310024, China
2 shared publications - Xiaoshuang Chen
College of Physics and Optoelectronic Engineering, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou, China
2 shared publications - Xuhao Fan
College of Physics and Optoelectronic Engineering, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, No. 1, Sub-Lane Xiangshan, Xihu District, Hangzhou 310024, China
2 shared publications
Latest Publications
- Open Access
Polarity-Tunable Photoresponse in Te0.61Se0.39 Nanowire for Broadband Optoelectronic Logic and Perception
Polarity-tunable photocurrents provide an intrinsic decision variable that enables in-sensor computing within a single device, moving beyond simple intensity detection toward next-generation intelligent vision, yet traditional photodetectors are limited by static doping profiles and fixed junction polarities. To overcome this bottleneck, we propose a Te0.61Se0.39 nanowire device with polarity-tunable photoresponse for broadband optoelectronic logic operation via photocarrier diffusion under localized light illumination. By simultaneously harnessing temporal (pulse width), spatial (light positions), amplitude (light intensity), and bias, our polarity-tunable devices deterministically realize the four fundamental Boolean logic gates (AND, NAND, XNOR, XOR), with a responsivity of 1.39 A/W and a specific detectivity of 1.75 × 1010 Jones across the visible to mid-wave infrared spectrum. We further showcased its scalability by constructing a two-layer composite Boolean circuit through the integration of optoelectronic AND and NAND gates. Practical applications in optical encoding/decoding transmission and differential perception highlight its broad functional adaptability. This work establishes a paradigm for broadband polarity devices in low-dimensional nanowires, providing a versatile platform for optoelectronic logic and differential imaging applications.
Open AccessPolarity-Tunable Photoresponse in Te0.61Se0.39 Nanowire for Broadband Optoelectronic Logic and Perception
Polarity-tunable photocurrents provide an intrinsic decision variable that enables in-sensor computing within a single device, moving beyond simple intensity detection toward next-generation intelligent vision, yet traditional photodetectors are limited by static doping profiles and fixed junction polarities. To overcome this bottleneck, we propose a Te0.61Se0.39 nanowire device with polarity-tunable photoresponse for broadband optoelectronic logic operation via photocarrier diffusion under localized light illumination. By simultaneously harnessing temporal (pulse width), spatial (light positions), amplitude (light intensity), and bias, our polarity-tunable devices deterministically realize the four fundamental Boolean logic gates (AND, NAND, XNOR, XOR), with a responsivity of 1.39 A/W and a specific detectivity of 1.75 × 1010 Jones across the visible to mid-wave infrared spectrum. We further showcased its scalability by constructing a two-layer composite Boolean circuit through the integration of optoelectronic AND and NAND gates. Practical applications in optical encoding/decoding transmission and differential perception highlight its broad functional adaptability. This work establishes a paradigm for broadband polarity devices in low-dimensional nanowires, providing a versatile platform for optoelectronic logic and differential imaging applications.
- Open Access
- 1 August 2025
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (8)
Controllable polarity photoresponse and imaging based on MoS₂/MLG/MoTe₂ heterostructure
The realization of controllable polarity photoresponse within a single device is a crucial advancement for simulating biological bipolar vision cells to drive the development of next-generation optoelectronic technologies. Nevertheless, current polarity photodetectors face significant challenges in fully suppressing symmetric photocurrent cancellation and optimizing carrier transport efficiency. Here, we propose a graphene-intercalated MoS2/MoTe2 heterojunction, featuring a tailorable built-in electric field and a high efficiency transport channel. Spatially resolved photocurrent reveals that the controllable polarity photoresponse originates from the bias-dependent equivalent built-in electric field of MoS2/MLG/MoTe2 heterojunction. The controllable polarity photoresponse realizes a large-area uniform “heart-shaped” photocurrent region. In enhanced polarity photoresponse mode, the photodetector exhibits broadband detection capabilities from visible (638 nm) to infrared (1550 nm) light, achieving a high responsivity of 18.1 A/W and an excellent detectivity of 2.8 × 1012 Jones, as well as fast response times of 94/119 µs. Furthermore, precise imaging with a resolution better than 0.5 mm was successfully demonstrated, highlighting its polarity photoresponse for practical imaging applications. This work provides a new paradigm for controllable polarity photoresponse programmed by intercalated low-dimensional material structures, paving the way for next-generation intelligent sensing chips.
- 1 August 2025
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (8)
Open AccessControllable polarity photoresponse and imaging based on MoS₂/MLG/MoTe₂ heterostructure
The realization of controllable polarity photoresponse within a single device is a crucial advancement for simulating biological bipolar vision cells to drive the development of next-generation optoelectronic technologies. Nevertheless, current polarity photodetectors face significant challenges in fully suppressing symmetric photocurrent cancellation and optimizing carrier transport efficiency. Here, we propose a graphene-intercalated MoS2/MoTe2 heterojunction, featuring a tailorable built-in electric field and a high efficiency transport channel. Spatially resolved photocurrent reveals that the controllable polarity photoresponse originates from the bias-dependent equivalent built-in electric field of MoS2/MLG/MoTe2 heterojunction. The controllable polarity photoresponse realizes a large-area uniform “heart-shaped” photocurrent region. In enhanced polarity photoresponse mode, the photodetector exhibits broadband detection capabilities from visible (638 nm) to infrared (1550 nm) light, achieving a high responsivity of 18.1 A/W and an excellent detectivity of 2.8 × 1012 Jones, as well as fast response times of 94/119 µs. Furthermore, precise imaging with a resolution better than 0.5 mm was successfully demonstrated, highlighting its polarity photoresponse for practical imaging applications. This work provides a new paradigm for controllable polarity photoresponse programmed by intercalated low-dimensional material structures, paving the way for next-generation intelligent sensing chips.
- Open Access
Photocurrent Generation and Collection in a WSe2-Based Composite Detector
Two-dimensional (2D) van der Waals materials have been actively investigated for broadband, high-sensitivity, low-power-consumption photodetection owing to their highly customizable band structures and fast interfacial charge transfers. Studying photocurrent generation mechanisms provides insights into charge carrier dynamics in WSe2-based detectors, linking spatial factors (e.g., photocurrent generation/collection) with interfacial band alignment. Here, we employ scanning photocurrent microscopy to spatially resolve the processes of photocurrent generation and collection in WSe2-based composite structures. Photocurrent polarity and magnitude at interface reflects interfacial band alignment and potential gradients at metal–WSe2 and WSe2–In2Se3 junctions. Strong electric fields at metal–WSe2 interfaces drive more efficient electron–hole separation and yield higher photocurrents, compared with WSe2–In2Se3 interfaces. The photodetector exhibits broadband detection capabilities from visible to infrared light, achieving a high responsivity of 17.7 A/W and an excellent detectivity of 3.7 × 1012 Jones, as well as fast response times of <113 µs. Furthermore, object imaging with a resolution better than 0.5 mm was successfully demonstrated, highlighting the potential of this photoresponse for practical imaging applications. This work reveals that photocurrent is distributed with a clear dependence on device configuration, offering a new avenue for optimizing 2D material-based photoelectric devices.
Open AccessPhotocurrent Generation and Collection in a WSe2-Based Composite Detector
Two-dimensional (2D) van der Waals materials have been actively investigated for broadband, high-sensitivity, low-power-consumption photodetection owing to their highly customizable band structures and fast interfacial charge transfers. Studying photocurrent generation mechanisms provides insights into charge carrier dynamics in WSe2-based detectors, linking spatial factors (e.g., photocurrent generation/collection) with interfacial band alignment. Here, we employ scanning photocurrent microscopy to spatially resolve the processes of photocurrent generation and collection in WSe2-based composite structures. Photocurrent polarity and magnitude at interface reflects interfacial band alignment and potential gradients at metal–WSe2 and WSe2–In2Se3 junctions. Strong electric fields at metal–WSe2 interfaces drive more efficient electron–hole separation and yield higher photocurrents, compared with WSe2–In2Se3 interfaces. The photodetector exhibits broadband detection capabilities from visible to infrared light, achieving a high responsivity of 17.7 A/W and an excellent detectivity of 3.7 × 1012 Jones, as well as fast response times of <113 µs. Furthermore, object imaging with a resolution better than 0.5 mm was successfully demonstrated, highlighting the potential of this photoresponse for practical imaging applications. This work reveals that photocurrent is distributed with a clear dependence on device configuration, offering a new avenue for optimizing 2D material-based photoelectric devices.