LDLi Dai

Li Dai

*This is an algorithmically generated author record based on publicly available information.

Li Dai has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Study on the Displacement Mechanism of Nitrogen Injection to Enhance Recovery in Water-Drive Gas Reservoirs: A Collaborative Analysis of Experiment and Simulation

    by Fenglai Yang, Chenhui Wang, Furong Wang, Li Dai, Haifa Tang, Chen Zhang, Xingnan Ren, Jian Li

    The efficient extraction of natural gas from water-drive reservoirs is often hindered by premature water breakthrough and the consequent trapping of significant residual gas, which collectively result in suboptimal recovery and economic returns. Traditional production methods have proven inadequate in mitigating water influx and mobilizing this trapped gas, underscoring the need for advanced enhanced gas recovery (EGR) strategies. This research specifically examines the potential of nitrogen injection as a tertiary recovery technique in such reservoirs, with a focus on its mechanistic role and displacement efficiency. Utilizing high-pressure core flooding experiments and complementary numerical simulations, the process of nitrogen injection following water flooding was systematically investigated. Experimental findings at 30 MPa indicate that while water flooding left a substantial residual gas saturation of 28.1%, subsequent nitrogen injection reduced this to 20.8% at breakthrough and ultimately to 7.99%, achieving a final recovery of 88.9%. Simulation results further elucidate that in fractured systems, water preferentially channels through high-permeability fractures, while capillary imbibition leads to gas entrapment within the matrix. Nitrogen injection effectively targets and reduces this trapped gas saturation by 30–50%, demonstrating its efficacy as a viable EGR method. The study thus provides critical theoretical and practical insights for improving recovery in challenging water-drive gas reservoirs.


  • Open Access

    Multi-Scale Characterization and Modeling of Natural Fractures in Ultra-Deep Tight Sandstone Reservoirs: A Case Study of Bozi-1 Gas Reservoir in Kuqa Depression

    by Li Dai, Xingnan Ren, Chengze Zhang, Yuanji Qu, Binghui Song, Xiaoyan Wang, Wei Tian

    Natural fractures in tight sandstone reservoirs are the key factors controlling hydrocarbon flow and productivity. The Bozi-1 gas reservoir in the Kuqa Depression, as a typical ultra-deep tight sandstone gas reservoir, is characterized by low-porosity and ultra-low-permeability sandstones. This study addresses the limitations of previous fracture characterization, which primarily focused on macro-structural fractures while neglecting medium- and small-scale fractures. We integrate multi-source heterogeneous data, including core, well-logging imaging, seismic, and production observations, to systematically conduct multi-scale natural fracture characterization and modeling. First, the overall geology of the study area is briefly introduced, followed by a detailed description of the development characteristics of large-scale and medium–small-scale fractures, achieving a multi-scale representation of complex curved fracture networks. Finally, the three-dimensional multi-scale fracture model is validated using static indicators, including production characteristics, water invasion features, and well leakage data. The main findings are as follows: (1) Large-scale fractures in the Bozi-1 reservoir are mainly oriented near EW, NE–SW, and NW–SE, acting as the primary hydrocarbon migration pathways. Medium–small-scale fractures predominantly develop near SN, NE–SW, NW–SE, and near EW directions, exhibiting strong heterogeneity. (2) The complex curvature of large-scale fractures was captured by the “adaptive sampling + segmented splicing + equivalent distribution of fracture flow capacity” method, while the distribution of effective medium–small-scale fractures across the study area was represented using “single-well Stoneley wave inversion + seismic machine learning prediction”, achieving an 86% match with actual single-well measurements. (3) Model reliability was further verified through static comparisons, including production characteristics (unimpeded flow vs. effective fracture density, R2 = 0.92), water invasion features (fracture-dominated water invasion matching fracture distribution), and well leakage characteristics (matching rate of high fracture density zones: 84.2%). The results provide key technical support for the precise characterization of fracture systems and establish a model ready for dynamic simulation in ultra-deep tight sandstone gas reservoirs.


  • Open Access

    Gas–Water Two-Phase Flow Mechanisms in Deep Tight Gas Reservoirs: Insights from Nanofluidics

    by Xuehao Pei, Li Dai, Cuili Wang, Junjie Zhong, Xingnan Ren, Zengding Wang, Chaofu Peng, Qihui Zhang, Ningtao Zhang

    Understanding gas–water two-phase flow mechanisms in deep tight gas reservoirs is critical for improving production performance and mitigating water invasion. However, the effects of pore-throat-fracture multiscale structures on gas–water flow remain inadequately understood, particularly under high-temperature and high-pressure conditions (HT/HP). In this study, we developed visualizable multiscale throat-pore and throat-pore-fracture physical nanofluidic chip models (feature sizes 500 nm–100 μm) parameterized with Keshen block geological data in the Tarim Basin. We then established an HT/HP nanofluidic platform (rated to 240 °C, 120 MPa; operated at 100 °C, 100 MPa) and, using optical microscopy, directly visualized spontaneous water imbibition and gas–water displacement in the throat-pore and throat-pore-fracture nanofluidic chips and quantified fluid saturation, front velocity, and threshold pressure gradients. The results revealed that the spontaneous imbibition process follows a three-stage evolution controlled by capillarity, gas compression, and pore-scale heterogeneity. Nanoscale throats and microscale pores exhibit good connectivity, facilitating rapid imbibition without significant scale-induced resistance. In contrast, 100 μm fractures create preferential flow paths, leading to enhanced micro-scale water locking and faster gas–water equilibrium. The matrix gas displacement threshold gradient remains below 0.3 MPa/cm, with the cross-scale Jamin effect—rather than capillarity—dominating displacement resistance. At higher pressure gradients (~1 MPa/cm), water is efficiently expelled to low saturations via nanoscale throat networks. This work provides an experimental platform for visualizing gas–water flow in multiscale porous media under ultra-high temperature and pressure conditions and offers mechanistic insights to guide gas injection strategies and water management in deep tight gas reservoirs.