Songqing Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Songqing Zhou has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Bengang Bao
College of Intelligent Manufacturing, Hunan University of Science and Engineering, Yongzhou 425199, P. R. China
1 shared publication - Haosong Zhang
College of Physics Science and Technology, Suzhou University of Science and Technology, Suzhou 215009, P. R. China
1 shared publication - Xiaolin Liang
School of Intelligent Manufacturing, Hunan University of Science and Engineering, Yongzhou 425199, China
1 shared publication
Latest Publications
- 28 May 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of High Speed Electronics and Systems
- Vol. 35 (04)
Analysis and Calculation of the Effects of Key Parameters on Beam Quality During Laser Transmission in Atmosphere
Compared to the effects of cavity mirror thermal deformation, cavity mirror misalignment, and the non-uniform distribution of the gain medium on laser beam quality, atmospheric disturbances have a more disruptive influence on laser beam quality. In order to investigate this effect, the variation of laser beam quality during the atmospheric transmission process was simulated and calculated under different parameters in the GLAD software environment. The calculation parameters primarily include the output laser power density, laser wavelength, atmospheric coherence length, altitude of the laser emission point, and focal length of the focusing mirror. The simulation results showed that: (1) As the output laser power density increases, the atmospheric perturbation effects such as atmospheric turbulence, thermal blooming, and wind speed become more pronounced, the laser beam diffuses at the irradiated target location, the spot appears fragmented, and the laser beam quality gradually deteriorates, the actual focus position of the laser gradually shifts forward, and when the output laser power density increases from 100[ ]W/cm 2 to 2000[ ]W/cm 2 , the corresponding focus moves from 3.0[ ]km to 1.6[ ]km. (2) The longer the laser wavelength, the better the laser beam quality, and the Strehl ratio corresponding to the 1.315[ ][ ]m wavelength is approximately twice that of the 0.85[ ][ ]m wavelength. (3) As atmospheric disturbance increases, the laser power density distribution at the irradiated target location begins to exhibit discrete peaks, and the laser beam quality gradually decreases. It is found that when the atmospheric coherence length exceeds 20[ ]cm, the laser intensity distribution gradually approaches an ideal state. In addition, with the increase in atmospheric coherence length, the actual laser focus position gradually shifts back when the atmospheric coherence length increased from 5[ ]cm to 10[ ]cm, the corresponding focus position moved from 2.0[ ]km to 3.0[ ]km, closer to the geometric focus position.(4) As the altitude of the laser emission point increases, the focusing effect of the laser spot improves, and the laser intensity distribution becomes closer to the ideal far-field distribution. The actual focus position of the laser gradually shifts back, when the altitude increases from 0[ ]km to 7[ ]km, the focus moves from 2.0[ ]km to 2.9[ ]km, which is closer to the geometric focus position, and the efficiency of the laser also increases. In addition, when the altitude increases from 3[ ]km to 7[ ]km, the corresponding laser power density and beam quality increase by 1.7[ ]times and 3.5[ ]times, respectively. (5) As the focal length of the focusing mirror increases, the laser beam quality improves gradually, and the atmospheric transmission quality of the laser also enhances progressively. These findings provide guidance for pre-correction of adaptive optics systems in lasers and for assessing long-distance laser transmission efficiency.
- 28 May 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of High Speed Electronics and Systems
- Vol. 35 (04)
Analysis and Calculation of the Effects of Key Parameters on Beam Quality During Laser Transmission in Atmosphere
Compared to the effects of cavity mirror thermal deformation, cavity mirror misalignment, and the non-uniform distribution of the gain medium on laser beam quality, atmospheric disturbances have a more disruptive influence on laser beam quality. In order to investigate this effect, the variation of laser beam quality during the atmospheric transmission process was simulated and calculated under different parameters in the GLAD software environment. The calculation parameters primarily include the output laser power density, laser wavelength, atmospheric coherence length, altitude of the laser emission point, and focal length of the focusing mirror. The simulation results showed that: (1) As the output laser power density increases, the atmospheric perturbation effects such as atmospheric turbulence, thermal blooming, and wind speed become more pronounced, the laser beam diffuses at the irradiated target location, the spot appears fragmented, and the laser beam quality gradually deteriorates, the actual focus position of the laser gradually shifts forward, and when the output laser power density increases from 100[ ]W/cm 2 to 2000[ ]W/cm 2 , the corresponding focus moves from 3.0[ ]km to 1.6[ ]km. (2) The longer the laser wavelength, the better the laser beam quality, and the Strehl ratio corresponding to the 1.315[ ][ ]m wavelength is approximately twice that of the 0.85[ ][ ]m wavelength. (3) As atmospheric disturbance increases, the laser power density distribution at the irradiated target location begins to exhibit discrete peaks, and the laser beam quality gradually decreases. It is found that when the atmospheric coherence length exceeds 20[ ]cm, the laser intensity distribution gradually approaches an ideal state. In addition, with the increase in atmospheric coherence length, the actual laser focus position gradually shifts back when the atmospheric coherence length increased from 5[ ]cm to 10[ ]cm, the corresponding focus position moved from 2.0[ ]km to 3.0[ ]km, closer to the geometric focus position.(4) As the altitude of the laser emission point increases, the focusing effect of the laser spot improves, and the laser intensity distribution becomes closer to the ideal far-field distribution. The actual focus position of the laser gradually shifts back, when the altitude increases from 0[ ]km to 7[ ]km, the focus moves from 2.0[ ]km to 2.9[ ]km, which is closer to the geometric focus position, and the efficiency of the laser also increases. In addition, when the altitude increases from 3[ ]km to 7[ ]km, the corresponding laser power density and beam quality increase by 1.7[ ]times and 3.5[ ]times, respectively. (5) As the focal length of the focusing mirror increases, the laser beam quality improves gradually, and the atmospheric transmission quality of the laser also enhances progressively. These findings provide guidance for pre-correction of adaptive optics systems in lasers and for assessing long-distance laser transmission efficiency.