Minshu Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Minshu Chen has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Chujun Zhou
Department of Civil Engineering
3 shared publicationsLei Guo
Department of Civil Engineering
3 shared publications- Lei Guo
University of Arkansas at Fayetteville
3 shared publications Shang Jia
Department of Chemistry
3 shared publications- Shang Jia
Department of Chemistry Rutgers University‐Newark 73 Warren St, Olson Hall Newark 07102 NJ USA
2 shared publications Tyler Maddox
Department of Chemistry and Biochemistry
2 shared publications
Latest Publications
- Open Access
- 17 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Engineering Stable and Targeted NIR/SWIR Imaging Agents through Metal-Organic Framework Nanoconfinement
Near-infrared (NIR) and shortwave infrared (SWIR) fluorophores offer significant potential for biomedical imaging owing to their deep tissue penetration and low background autofluorescence. However, their widespread application remains limited by poor aqueous solubility, aggregation-induced fluorescence loss, and inadequate stability in physiological environments. Here, we present a general nanoconfinement strategy that converts hydrophobic molecular fluorophores into stable, bright, and engineerable imaging nanocomposites through encapsulation within the large-pore metal-organic framework ZIF-71. Using IR-780 as a model dye and extending the approach to the larger fluorophores IR-813 and IR-1048, we demonstrate that in situ encapsulation preserves a predominantly monomeric dye population within the ZIF-71 framework, effectively suppressing aggregation across diverse aqueous environments, including physiologically relevant and high-salinity conditions. Compared with free dyes and benchmark micellar formulations, the IR-780@ZIF composites exhibit markedly improved resistance to aggregation, enhanced solution and photostability, and substantially increased fluorescence quantum yields and imaging brightness in water and phosphate-buffered saline. The benefits of confinement become increasingly pronounced for larger and more hydrophobic fluorophores, turning essentially dark free dyes IR-813 and IR-1048 in aqueous media into bright composites. Importantly, the external surface of the ZIF particles can be modified orthogonally through post-synthetic functionalization without compromising the optical properties of the encapsulated fluorophore. Surface incorporation of biotin and cell-penetrating peptide ligands enables tailored cellular delivery of the fluorophores, demonstrating the modularity of the platform. Collectively, these results establish large-pore ZIFs as versatile hosts for molecular NIR/SWIR fluorophores and highlight MOF nanoconfinement as a powerful strategy for integrating high-performance photophysics with customizable biological functionality for advanced imaging applications.
- 17 November 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEngineering Stable and Targeted NIR/SWIR Imaging Agents through Metal-Organic Framework Nanoconfinement
Near-infrared (NIR) and shortwave infrared (SWIR) fluorophores offer significant potential for biomedical imaging owing to their deep tissue penetration and low background autofluorescence. However, their widespread application remains limited by poor aqueous solubility, aggregation-induced fluorescence loss, and inadequate stability in physiological environments. Here, we present a general nanoconfinement strategy that converts hydrophobic molecular fluorophores into stable, bright, and engineerable imaging nanocomposites through encapsulation within the large-pore metal-organic framework ZIF-71. Using IR-780 as a model dye and extending the approach to the larger fluorophores IR-813 and IR-1048, we demonstrate that in situ encapsulation preserves a predominantly monomeric dye population within the ZIF-71 framework, effectively suppressing aggregation across diverse aqueous environments, including physiologically relevant and high-salinity conditions. Compared with free dyes and benchmark micellar formulations, the IR-780@ZIF composites exhibit markedly improved resistance to aggregation, enhanced solution and photostability, and substantially increased fluorescence quantum yields and imaging brightness in water and phosphate-buffered saline. The benefits of confinement become increasingly pronounced for larger and more hydrophobic fluorophores, turning essentially dark free dyes IR-813 and IR-1048 in aqueous media into bright composites. Importantly, the external surface of the ZIF particles can be modified orthogonally through post-synthetic functionalization without compromising the optical properties of the encapsulated fluorophore. Surface incorporation of biotin and cell-penetrating peptide ligands enables tailored cellular delivery of the fluorophores, demonstrating the modularity of the platform. Collectively, these results establish large-pore ZIFs as versatile hosts for molecular NIR/SWIR fluorophores and highlight MOF nanoconfinement as a powerful strategy for integrating high-performance photophysics with customizable biological functionality for advanced imaging applications.
- Open Access
- 16 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Particle-Size Modulated MOFs for Fluorescent PFAS Sensing
Per- and polyfluoroalkyl substances (PFAS) require sensitive and accessible detection technologies to complement conventional laboratory-based analytical methods. Metal-organic frameworks (MOFs) have emerged as promising fluorescence sensing platforms owing to their high surface areas, tunable pore environments, and versatile host-guest interactions. To date, efforts to improve MOF-based PFAS sensing have primarily focused on framework chemistry and pore engineering, while the role of particle size has remained largely unexplored. Here, we systematically investigate the influence of particle size on PFAS fluorescence sensing using NU-1000 as a model fluorescent MOF platform. A series of NU-1000 particles with sizes ranging from approximately 300 nm to 10 μm were synthesized while maintaining comparable crystallinity, porosity, morphology, and chemical composition. Fluorescence measurements revealed a pronounced particle-size dependence, with smaller particles exhibiting substantially enhanced responses toward perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), and perfluorodecanoic acid (PFDA). Reducing the particle size from 2 μm to 300 nm lowered the limits of detection by approximately one-half, from 311.4 to 153.8 ppb for PFOA, from 282.0 to 145.3 ppb for PFOS, and from 615.4 to 269.4 ppb for PFDA. Mechanistic investigations showed that the observed size effect does not arise from differences in PFAS uptake. Instead, decreasing particle size increases the surface-to-volume ratio, resulting in a larger fraction of surface-accessible Zr6 adsorption sites and emissive TBAPy linkers that induces more efficient fluorescence signal generation. Consequently, PFAS adsorption events are converted into more substantial fluorescence responses despite comparable overall uptake. These findings identify particle size as a previously overlooked design parameter governing MOF-based fluorescence sensing and demonstrate that particle-size engineering offers a simple, effective, and broadly applicable strategy for enhancing sensing performance without altering framework chemistry or pore architecture.
- 16 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessParticle-Size Modulated MOFs for Fluorescent PFAS Sensing
Per- and polyfluoroalkyl substances (PFAS) require sensitive and accessible detection technologies to complement conventional laboratory-based analytical methods. Metal-organic frameworks (MOFs) have emerged as promising fluorescence sensing platforms owing to their high surface areas, tunable pore environments, and versatile host-guest interactions. To date, efforts to improve MOF-based PFAS sensing have primarily focused on framework chemistry and pore engineering, while the role of particle size has remained largely unexplored. Here, we systematically investigate the influence of particle size on PFAS fluorescence sensing using NU-1000 as a model fluorescent MOF platform. A series of NU-1000 particles with sizes ranging from approximately 300 nm to 10 μm were synthesized while maintaining comparable crystallinity, porosity, morphology, and chemical composition. Fluorescence measurements revealed a pronounced particle-size dependence, with smaller particles exhibiting substantially enhanced responses toward perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), and perfluorodecanoic acid (PFDA). Reducing the particle size from 2 μm to 300 nm lowered the limits of detection by approximately one-half, from 311.4 to 153.8 ppb for PFOA, from 282.0 to 145.3 ppb for PFOS, and from 615.4 to 269.4 ppb for PFDA. Mechanistic investigations showed that the observed size effect does not arise from differences in PFAS uptake. Instead, decreasing particle size increases the surface-to-volume ratio, resulting in a larger fraction of surface-accessible Zr6 adsorption sites and emissive TBAPy linkers that induces more efficient fluorescence signal generation. Consequently, PFAS adsorption events are converted into more substantial fluorescence responses despite comparable overall uptake. These findings identify particle size as a previously overlooked design parameter governing MOF-based fluorescence sensing and demonstrate that particle-size engineering offers a simple, effective, and broadly applicable strategy for enhancing sensing performance without altering framework chemistry or pore architecture.
- 6 September 2026
- Published by Wiley in Israel Journal of Chemistry
- Vol. 66 (5) , e70045
From Gallium Adsorption Mechanisms to the Rational Design of Metal–Organic Frameworks for Gallium Recovery
Gallium (Ga) is essential for semiconductor and optoelectronic applications, but high‐purity Ga production and supply remain constrained by limited primary resources. Recovering Ga from wastewater offers an alternative source, yet remains difficult because Ga usually occurs at low concentrations and coexists with competing metal ions. Adsorption is a promising strategy owing to its operational simplicity, compatibility with existing treatment infrastructure, and cost‐effectiveness. Among all Ga adsorption works, studies on metal‐organic framework (MOF)‐based Ga adsorbents are still limited, making it challenging to define clear design principles from MOF literature alone. In this mini‐review, we summarize representative Ga adsorption studies involving MOFs, polymers/resins, inorganic oxides, and bio‐derived or hybrid materials. By comparing functional groups, adsorption performance, and mechanisms, we identify key factors governing Ga capture. Ga adsorption is mainly driven by coordination interactions, particularly with O‐donor groups such as hydroxyl, amidoxime, catechol, and hydroxamic acid moieties. Meanwhile, pH‐dependent Ga speciation, active‐site accessibility, pore structure, and solution complexity strongly influence performance. These insights suggest that future MOF design should emphasize strong O‐rich binding sites, accessible pores, controlled functional‐group distribution, and chemical stability under realistic recovery conditions.
- 6 September 2026
- Published by Wiley in Israel Journal of Chemistry
- Vol. 66 (5) , e70045
From Gallium Adsorption Mechanisms to the Rational Design of Metal–Organic Frameworks for Gallium Recovery
Gallium (Ga) is essential for semiconductor and optoelectronic applications, but high‐purity Ga production and supply remain constrained by limited primary resources. Recovering Ga from wastewater offers an alternative source, yet remains difficult because Ga usually occurs at low concentrations and coexists with competing metal ions. Adsorption is a promising strategy owing to its operational simplicity, compatibility with existing treatment infrastructure, and cost‐effectiveness. Among all Ga adsorption works, studies on metal‐organic framework (MOF)‐based Ga adsorbents are still limited, making it challenging to define clear design principles from MOF literature alone. In this mini‐review, we summarize representative Ga adsorption studies involving MOFs, polymers/resins, inorganic oxides, and bio‐derived or hybrid materials. By comparing functional groups, adsorption performance, and mechanisms, we identify key factors governing Ga capture. Ga adsorption is mainly driven by coordination interactions, particularly with O‐donor groups such as hydroxyl, amidoxime, catechol, and hydroxamic acid moieties. Meanwhile, pH‐dependent Ga speciation, active‐site accessibility, pore structure, and solution complexity strongly influence performance. These insights suggest that future MOF design should emphasize strong O‐rich binding sites, accessible pores, controlled functional‐group distribution, and chemical stability under realistic recovery conditions.
- Open Access
- 27 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Toward Rational Metal-Organic Framework Design for Gallium Adsorption
Gallium (Ga) is an important element for semiconductor and optoelectronic applications. Yet, production of high-purity Ga and a reliable supply chain remain challenging due to limited primary resources and geopolitical factors, which highlights recovery of Ga from wastewater as an alternative avenue to maintain a viable Ga supply chain. However, Ga recovery remains challenging because it is commonly present at low concentrations and coexists with competing metal ions in complex aqueous systems. Adsorption has emerged as a promising strategy for Ga recovery due to its operational simplicity, technical readiness, adaptness to the existing utilities, and cost-effectiveness. Readily tunable surface chemistry of adsorbents can potentially further improve recovery performance. However, studies on metal-organic framework (MOF)-based Ga adsorbents remain relatively limited, making it difficult to establish clear design principles based only on existing MOF literature. In this mini-review, we summarize representative Ga adsorption studies across different materials, including MOFs, polymer/resin, inorganic oxides, and bio-derived/hybrid materials. By comparing their functional groups, adsorption performances, and mechanisms, we identify several common features governing Ga capture. Across these systems, Ga adsorption is primarily dominated by coordination interactions, especially involving O-donor sites such as hydroxyl, amidoxime, catechol, and hydroxamic acid groups. At the same time, pH-dependent Ga speciation, active-site accessibility, pore structure, and solution complexity strongly affect adsorption performances. These insights suggest that future MOF design should focus on integrating strong O-rich binding sites, accessible pore environments, controlled functional group distribution, and chemical stability under realistic recovery conditions. This review provides a mechanism guided perspective for translating lessons from broader adsorbent systems into the rational design of MOF-based materials for selective Ga capture.
- 27 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessToward Rational Metal-Organic Framework Design for Gallium Adsorption
Gallium (Ga) is an important element for semiconductor and optoelectronic applications. Yet, production of high-purity Ga and a reliable supply chain remain challenging due to limited primary resources and geopolitical factors, which highlights recovery of Ga from wastewater as an alternative avenue to maintain a viable Ga supply chain. However, Ga recovery remains challenging because it is commonly present at low concentrations and coexists with competing metal ions in complex aqueous systems. Adsorption has emerged as a promising strategy for Ga recovery due to its operational simplicity, technical readiness, adaptness to the existing utilities, and cost-effectiveness. Readily tunable surface chemistry of adsorbents can potentially further improve recovery performance. However, studies on metal-organic framework (MOF)-based Ga adsorbents remain relatively limited, making it difficult to establish clear design principles based only on existing MOF literature. In this mini-review, we summarize representative Ga adsorption studies across different materials, including MOFs, polymer/resin, inorganic oxides, and bio-derived/hybrid materials. By comparing their functional groups, adsorption performances, and mechanisms, we identify several common features governing Ga capture. Across these systems, Ga adsorption is primarily dominated by coordination interactions, especially involving O-donor sites such as hydroxyl, amidoxime, catechol, and hydroxamic acid groups. At the same time, pH-dependent Ga speciation, active-site accessibility, pore structure, and solution complexity strongly affect adsorption performances. These insights suggest that future MOF design should focus on integrating strong O-rich binding sites, accessible pore environments, controlled functional group distribution, and chemical stability under realistic recovery conditions. This review provides a mechanism guided perspective for translating lessons from broader adsorbent systems into the rational design of MOF-based materials for selective Ga capture.
- Open Access
Inhibition of Urea Hydrolysis in Human Urine for Resource and Energy Recovery: Pharmaceuticals and Their Metabolites as Co-Existing Anticatalyzers
Urine, which has a high concentration of urea, can be used as a sustainable resource for nutrient recovery and sustainable energy. However, urea undergoes hydrolysis, catalyzed by urease, generating ammonia and carbon dioxide. As ammonia is released during hydrolysis in stored urine, the pH rises progressively until the pKa of ammonium is reached (i.e., 9.3). At elevated pH levels, struvite and other related precipitates are formed. These reactions lower the efficiency of ammonia and urea nitrogen recovery and often cause scaling, pipe blockage, and odors. Herein, we explore an approach to stabilize urea, using pharmaceuticals and their metabolites that are commonly present in human urine. Based on a survey of the urease inhibitory effects of twenty-three pharmaceuticals and metabolites, we determined that the polyphenolic and disulfide-containing compounds had the highest urease inhibition efficiency. Specifically, outstanding inhibitors include catechol (CAT), hydroquinone (HYD), and disulfiram (DSF). Furthermore, when added to urine, these compounds resulted in the retardation of urease-catalyzed hydrolysis, leading to longer-term urine stabilization upon storage. Reaction mechanisms for urease inhibition by polyphenolics and disulfiram are proposed. Evidence is provided that pharmaceutical metabolites can stabilize urea and thus could lead to a sustainable method for nitrogen nutrient recovery from stored urine.
Open AccessInhibition of Urea Hydrolysis in Human Urine for Resource and Energy Recovery: Pharmaceuticals and Their Metabolites as Co-Existing Anticatalyzers
Urine, which has a high concentration of urea, can be used as a sustainable resource for nutrient recovery and sustainable energy. However, urea undergoes hydrolysis, catalyzed by urease, generating ammonia and carbon dioxide. As ammonia is released during hydrolysis in stored urine, the pH rises progressively until the pKa of ammonium is reached (i.e., 9.3). At elevated pH levels, struvite and other related precipitates are formed. These reactions lower the efficiency of ammonia and urea nitrogen recovery and often cause scaling, pipe blockage, and odors. Herein, we explore an approach to stabilize urea, using pharmaceuticals and their metabolites that are commonly present in human urine. Based on a survey of the urease inhibitory effects of twenty-three pharmaceuticals and metabolites, we determined that the polyphenolic and disulfide-containing compounds had the highest urease inhibition efficiency. Specifically, outstanding inhibitors include catechol (CAT), hydroquinone (HYD), and disulfiram (DSF). Furthermore, when added to urine, these compounds resulted in the retardation of urease-catalyzed hydrolysis, leading to longer-term urine stabilization upon storage. Reaction mechanisms for urease inhibition by polyphenolics and disulfiram are proposed. Evidence is provided that pharmaceutical metabolites can stabilize urea and thus could lead to a sustainable method for nitrogen nutrient recovery from stored urine.
- Open Access
- 5 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Fluorous Modification of Commercial Resins for Ultrashort and Short Chain PFAS Removal
Ultrashort and short chain per- and polyfluoroalkyl substances (PFAS) represent an emerging class of micropollutants that extend beyond the well-studied and regulated legacy PFAS. These compounds present unique sorptive removal challenges due to their weaker hydrophobic interactions with conventional sorbents and their pronounced ionic character in natural water matrices, where they are easily outcompeted by more prevalent inorganic ions. Here, we introduce a novel modifica-tion reaction—for the first time, applicable to commercial resins—that enables the incorporation of a tunable fluorous effect. We synthesized 20 modified resins with varying degrees of fluorous affinity, allowing systematic evaluation of how F-F interaction impacted ultrashort and short chain PFAS removal. Successful modification was confirmed through multi-ple characterization techniques. Notably, modified resin, OC-C4-0.5, demonstrated exceptional trifluoroacetic acid (TFA) retention, with less than 2% capacity loss over 72 h, far outperforming the pristine resin (15% loss). Both OC-C2-0.5 and OC-C4-0.5 also showed a substantially higher TFA uptake in thermodynamic studies, achieving 26% and 28% more removal, respectively, compared to OC Unmod during adsorption thermodynamics studies. This work establishes a foundation for systematically investigating the fluorous effect’s role in PFAS sorption, particularly for ultrashort and short chain species. It also highlights the potential of fluorous-driven strategies to characterize and manage these challenging compounds.
- 5 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFluorous Modification of Commercial Resins for Ultrashort and Short Chain PFAS Removal
Ultrashort and short chain per- and polyfluoroalkyl substances (PFAS) represent an emerging class of micropollutants that extend beyond the well-studied and regulated legacy PFAS. These compounds present unique sorptive removal challenges due to their weaker hydrophobic interactions with conventional sorbents and their pronounced ionic character in natural water matrices, where they are easily outcompeted by more prevalent inorganic ions. Here, we introduce a novel modifica-tion reaction—for the first time, applicable to commercial resins—that enables the incorporation of a tunable fluorous effect. We synthesized 20 modified resins with varying degrees of fluorous affinity, allowing systematic evaluation of how F-F interaction impacted ultrashort and short chain PFAS removal. Successful modification was confirmed through multi-ple characterization techniques. Notably, modified resin, OC-C4-0.5, demonstrated exceptional trifluoroacetic acid (TFA) retention, with less than 2% capacity loss over 72 h, far outperforming the pristine resin (15% loss). Both OC-C2-0.5 and OC-C4-0.5 also showed a substantially higher TFA uptake in thermodynamic studies, achieving 26% and 28% more removal, respectively, compared to OC Unmod during adsorption thermodynamics studies. This work establishes a foundation for systematically investigating the fluorous effect’s role in PFAS sorption, particularly for ultrashort and short chain species. It also highlights the potential of fluorous-driven strategies to characterize and manage these challenging compounds.