JHJinge Huang

Jinge Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinge Huang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Validation of the Multiplex PCR Assays for Detection of Salmonella spp. and Cronobacter sakazakii on Stainless-Steel and Sealed Concrete Surfaces Compared With FDA-BAM Reference Methods

    by Elba V Arias-Rios, Jinge Huang, James Jiang, Shawn Owens, Khristian Saclayan, Caleb Johnson, Fereidoun Forghani, Mansour Samadpour

    Background: Rapid laboratory detection methods need to be tested against reference methods to confirm their efficiency and suitability. Objective: In an unpaired study, the IEH Salmonella-Cronobacter spp. and Cronobacter sakazakii-Salmonella Multiplex PCR Assays’ performance was compared with the FDA-BAM reference methods Chapter 5 for Salmonella and Chapter 29 for Cronobacter sakazakii detection on stainless-steel (SS) and sealed concrete (SC) surfaces. Methods: Seeking a shorter enrichment time for the candidate method, the Salmonella-Cronobacter broth enrichments for 18, 20, 22, and 24 h at 35 °C were analyzed with the IEH Multiplex PCR Assays. Two pathogen cocktails were prepared: one including S. Typhimurium ATCC 19585, S. Senftenberg 775 W, and S. Enteritidis PT30, and a second one including C. sakazakii MEI 27583, C. sakazakii ATCC 29544, and C. sakazakii ATCC 29004. The Salmonella and C. sakazakii cocktails were independently inoculated onto separate SS and SC following the AOAC guidelines. Additionally, a competing microorganism was added at a concentration 10–100 times higher than that of the pathogens. Results: The candidate method yielded zero false negatives and zero false positives, with 100% sensitivity and 100% specificity for both SS and SC surfaces, regardless of the inoculation level (high, low, and uninoculated) and the enrichment time (i.e., 18, 20, 22, and 24 h for Salmonella, and 20, 22, and 24 h for C. sakazakii). The candidate method successfully detected both target microorganisms on both surface types with a minimum enrichment of 20 h. Statistical analysis using the probability of detection (POD) confirmed the equivalency between the candidate method and the reference methods at either inoculation level or enrichment time (P > 0.05). Conclusions: The IEH Salmonella-Cronobacter spp. and Cronobacter sakazakii-Salmonella Multiplex PCR Assays demonstrated performance comparable to the FDA-BAM reference methods for the detection of Salmonella and C. sakazakii on SS and SC, with a significantly shorter turnaround time. Highlights: The IEH Multiplex PCR assays detected Salmonella and Cronobacter in a shorter time (20 h) when compared to the FDA-BAM reference methods (4–5 days). The surface type had no significant impact on the sensitivity or specificity of the assays. The IEH Multiplex PCR Salmonella-Cronobacter assays were comparable to the FDA-BAM reference methods.

  • Open Access

    Efficacy of Antimicrobials Against Enveloped and Non-Enveloped Viruses on Porous Materials: A Review

    by Jinge Huang, Breanna Kimbrell, Runan Yan, Angela M. Fraser, Xiuping Jiang

    Fomites are common vehicles for viral transmission. Most studies on virus disinfection have focused on non-porous, hard surfaces, with few investigating porous materials. This review addresses two research questions: (1) What affects viral viability on reusable porous materials? (2) Which antimicrobials effectively target viruses on these materials? Among existing studies, viral persistence on reusable porous surfaces was influenced by several factors, including viral envelope status, virus subtype, material type and structure, temperature, relative humidity, deposition method, and transmission medium. Disinfectants evaluated included ultraviolet irradiation, steam, chlorine, quaternary ammonium compounds, alcohols, glutaraldehyde, silver, and peroxide-based agents. Chlorine and steam were most effective; glutaraldehyde and peroxides showed limited action against non-enveloped viruses. Viral persistence and disinfection efficacy on reusable porous materials are influenced by multiple factors, highlighting the need for robust environmental management and infection control practices. Lack of standard tests and long-term disinfection effects on material integrity remain key challenges needing further study.


  • Open Access

    Efficacy of three chemical disinfectants and steam against Clostridioides difficile endospores on nylon carpet with two different backing systems

    by Jinge Huang, Angela Fraser, Xiuping Jiang

    Carpet could serve as a potential vehicle for transmitting Clostridioides difficile endospores, a leading cause of healthcare-associated infections. To develop carpet disinfection practices, a validated recovery method and standard efficacy testing method are necessary. The recovery method was optimized to detect C. difficil e endospores on carpet by using different concentrations of Tween-80 and varying stomaching times. Adding 0.2% Tween-80 followed by stomaching for 3 min and sonication increased the recovery rate of C. difficile endospores to >60%. The efficacy of three disinfectants (two hydrogen peroxide-based products, A and B, and one chlorine-based product, C) and steam was tested against C. difficile endospores on two types of nylon carpet (with water-permeable backing and waterproof backing). The results showed that product B was the most effective among the chemical disinfectants, achieving a 5.8 and 4.9 log 10 CFU reduction of C. difficile endospores in 30 min on carpets with water-permeable and waterproof backings, respectively. A steam treatment of 120 s resulted in 4.9 and >6.0 log 10 CFU reduction on water-permeable and waterproof backings, respectively. On water-permeable backing, 30 s steam treatment followed by application of H 2 O 2 -based products A and B resulted in a 4.4 and >6.1 log 10 CFU reduction of C. difficile endospores, respectively. Overall, a 120 s steam treatment was more effective than any of the three disinfectants tested. Disinfectant efficacy varied by carpet backing type, underscoring the need for guidance in carpet selection for healthcare safety. IMPORTANCE: Clostridioides difficile , a spore-forming anaerobic bacterium and a leading cause of healthcare-associated infections, can be transmitted from the floor to other surfaces via air movement. Therefore, disinfection of all floors after cleaning, regardless of type, might be necessary to prevent recurrent C. difficile infections among patients. To develop carpet disinfection practices, a validated recovery method and standard efficacy testing method are necessary. In this study, we first optimized the spore recovery method from carpets. Next, our study demonstrated that carpet backing affected the efficacy of chemical disinfectants and steam against C. difficile endospores. Steam was particularly effective on carpets with waterproof backing, while only product B showed strong efficacy on carpets with water-permeable backing. When steam was combined with a chemical disinfectant, the efficacy of both H 2 O 2 -based products against C. difficile endospores was enhanced. These findings can inform the development of carpet disinfection practices.


  • Efficacy of photoClO2 against two human norovirus surrogates and Clostridioides difficile endospores on stainless steel and nylon carpet

    by Jinge Huang, Jacob Adams, Charles Pettigrew, Angela Fraser, Xiuping Jiang

    Determine efficacy of an aqueous photocatalytic disinfection system, photoClO2, against two human norovirus surrogates [feline calicivirus (FCV) and Tulane virus (TuV)] and Clostridioides difficile endospores on stainless steel and nylon carpet. The photoClO2 system was first optimized with 1% sodium chlorite (NaClO2) and 10 ppm Eosin Y to produce 60.64 ppm ClO2/min in a 4.5×4.5 cm2 area. It was then tested against FCV, TuV, and C. difficile endospores on stainless steel and nylon carpet with two different backings. On stainless steel, photoClO2 achieved a >5 log10 plaque-forming unit (PFU) reduction of FCV in 45 min, >3 log10 median tissue culture infectious dose (TCID50) reduction of TuV in 60 min, and 1.3 log10 colony-forming unit (CFU) reduction of C. difficile endospores in 120 min. Under indoor lighting conditions, photoClO2 achieved a 4.3 log10 PFU reduction of FCV and 1.4 log10 TCID50 reduction of TuV on stainless steel after 120 min. Further, photoClO2 achieved a 2.9 log10 PFU reduction of FCV and 2.5 log10 TCID50 reduction of TuV on nylon carpet with waterproof backing in 60 min, which was higher than carpet with water-permeable backing (1.3 log10 PFU and 1.1 log10 TCID50 reduction, respectively). ClO2 production rate of the photoClO2 system was influenced by light distribution, while disinfection efficacy was affected by light intensity, surface characteristics, and target microorganisms. PhotoClO2 was efficacious in inactivating both human norovirus surrogates on stainless steel and nylon carpet. Efficacy against C. difficile endospores was limited.


  • Open Access

    Antiviral activity of Nigella sativa oil against two SARS-CoV-2surrogates in vitro as a dietary product

    by Xiuping Jiang, Jinge Huang, Jingxue Wang

    Background: Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is primarily transmitted via aerosol and droplets, but environmental surfaces or potentially contaminated foods may contribute to further viral transmission. Nigella sativa seed (black cumin seed) oil possesses various biological activities against bacteria, fungi, parasites, orviruses. Objectives: This study aimed to explore black cumin seed oil (BSO) with anti-SARS-CoV-2 activities using bovine coronavirus (BCoV) and human coronavirus (HCoV) OC43 as surrogates. Methods and Results: BSO was tested at 1-100 mL/L concentrations for cytotoxicity towards human rectal tumor (HRT-18G) cells and 0.1-10 mL/L for efficacy against BCoV and HCoV OC43 in suspension. Two coronaviruses were separately mixed with BSO suspension and incubated for various times (0, 15, 30, 45, and 60 min) at 4, 23, and 37°C. The virus titerreduction was determined by median tissue culture infectious dose (TCID50) assay with HRT-18G cells as the host. BSO concentrations of 1-20 mL/L exhibited low cytotoxicity (<10%) towards HRT-18G cells. The inactivation of coronaviruses by BSO was concentration-, temperature-, and exposure time-dependent. At 37°C, BSO reduced 2.0 logs of BCoV and3.0 logs of HCoV OC43 in 60 min, respectively. Specifically, half maximal effective concentration (EC50) of BSO at 4, 23, and 37°C after the 1-h exposure was 4.28, 3.06, and 0.87 mL/L against BCoV, respectively, and 0.61, 0.61 and 0.48 mL/L against HCoV OC43, respectively. Moreover, BSO didn’t affect the attachment of BCoV and HCoV OC43 into host cells. Conclusion: Our findings on the inhibition activity of BSO against SARS-CoV-2 surrogates suggested the potential use of this natural product in mitigating SARS-CoV-2 infection. Our results also suggest that HCoV OC43 may be a more appropriate surrogate for SARS-CoV-2 to screen antiviral dietary products. Keywords: Nigella sativa, SARS-CoV-2 surrogates, antiviral activity, quantitative suspension test, dietary supplement


  • Open Access

    Persistence of two coronaviruses and efficacy of steam vapor disinfection on two types of carpet

    by Jinge Huang, Angela Fraser, Xiuping Jiang

    Background: Coronaviruses, a group of highly transmissible and potentially pathogenic viruses, can be transmitted indirectly to humans via fomites. To date, no study has investigated their persistence on carpet fibers. Establishing persistence is essential before testing the efficacy of a disinfectant. Methods: The persistence of BCoV and HCoV OC43 on polyethylene terephthalate (PET) and nylon carpet was first determined using infectivity and RT-qPCR assays. Then, the disinfectant efficacy of steam vapor was evaluated against both coronaviruses on nylon carpet. Results: Immediately after inoculation of carpet coupons, 32.50% of BCoV and 3.87% of HCoV OC43 were recovered from PET carpet, compared to 34.86% of BCoV and 24.37% of HCoV OC43 recovered from nylon carpet. After incubation at room temperature for 1 h, BCoV and HCoV OC43 showed a 3.6 and > 2.8 log10 TCID50 reduction on PET carpet, and a 0.6 and 1.8 log10 TCID50 reduction on nylon carpet. Based on first-order decay kinetics, the whole gRNA of BCoV and HCoV OC43 were stable with k values of 1.19 and 0.67 h− 1 on PET carpet and 0.86 and 0.27 h− 1 on nylon carpet, respectively. A 15-s steam vapor treatment achieved a > 3.0 log10 TCID50 reduction of BCoV and > 3.2 log10 TCID50 reduction of HCoV OC43 on nylon carpet. Conclusion: BCoV was more resistant to desiccation on both carpet types than HCoV OC43. Both viruses lost infectivity quicker on PET carpet than on nylon carpet. Steam vapor inactivated both coronaviruses on nylon carpet within 15 s.

  • Efficacy of three EPA-registered antimicrobials and steam against two human norovirus surrogates on nylon carpets with two backing types

    by Jinge Huang, Angela Fraser, Xiuping Jiang

    Carpet cleaning guidelines currently do not include the use of an antimicrobial, except after a bodily fluid event. To address this gap, we compared the efficacy of three antimicrobials—two hydrogen peroxide-based (H 2 O 2 ) products (A and B) and one chlorine-based product (C)—and a steam treatment against two norovirus surrogates, specifically feline calicivirus (FCV) and Tulane virus (TuV). These tests were performed on nylon carpets with either water-permeable or waterproof backing types. The effect of repeated antimicrobial use on carpet properties was also evaluated. For a carpet with water-permeable backing, products A, B, and C achieved a 0.8, 3.1, and 0.9 log 10 PFU/coupon reduction of FCV and 0.3, 2.5, and 0.4 log 10 TCID 50 /coupon reduction of TuV, respectively, following a 30 min contact time. For carpet with waterproof backing, only product B achieved a 5.0 log 10 PFU/coupon reduction of FCV and >3.0 log 10 TCID 50 /coupon reduction of TuV, whereas products A and C achieved a 2.4 and 1.6 log 10 PFU/coupon reduction of FCV and a 1.2 and 1.2 log 10 TCID 50 /coupon reduction of TuV, respectively. Steam treatment achieved a ≥ 5.2 log 10 PFU/coupon reduction of FCV and a > 3.2 log 10 TCID 50 /coupon reduction of TuV in 15 seconds on the carpet with both backing types. The repeated use of products A and B decreased the tensile strength of the carpet backing, while use of product B resulted in cracks on carpet fibers. Overall, steam treatment for 15 seconds was efficacious on both carpet types, but only product B achieved efficacy after a 30-minute exposure on the carpet with waterproof backing. IMPORTANCE: Carpets are common in long-term care facilities, despite its potential as a vehicle for transmission of agents associated with healthcare-associated infections, including human norovirus (NoV). Presently, our understanding of carpet disinfection is limited; hence, there are no commercial antimicrobials against norovirus available for use on carpets. Our findings showed that steam treatment, which minimally affected the properties of carpet fibers and backing, was more efficacious against human norovirus surrogates on carpets compared to the three chemical antimicrobials tested. Additionally, the two surrogates were more sensitive to chemical antimicrobials on the carpet with waterproof backing compared to carpets with water-permeable backing. These findings can inform development of antimicrobials for use on carpets contaminated with human norovirus.


  • Open Access

    Vapor-induced phase-separation-enabled versatile direct ink writing

    by Marc Sole-Gras, Bing Ren, Benjamin J. Ryder, Jinqun Ge, Jinge Huang, Wenxuan Chai, Jun Yin, Gerhard E. Fuchs, Guoan Wang, Xiuping Jiang, et al.

    Versatile printing of polymers, metals, and composites always calls for simple, economic approaches. Here we present an approach to three-dimensional (3D) printing of polymeric, metallic, and composite materials at room conditions, based on the polymeric vapor-induced phase separation (VIPS) process. During VIPS 3D printing (VIPS-3DP), a dissolved polymer-based ink is deposited in an environment where nebulized non-solvent is present, inducing the low-volatility solvent to be extracted from the filament in a controllable manner due to its higher chemical affinity with the non-solvent used. The polymeric phase is hardened in situ as a result of the induced phase separation process. The low volatility of the solvent enables its reclamation after the printing process, significantly reducing its environmental footprint. We first demonstrate the use of VIPS-3DP for polymer printing, showcasing its potential in printing intricate structures. We further extend VIPS-3DP to the deposition of polymer-based metallic inks or composite powder-laden polymeric inks, which become metallic parts or composites after a thermal cycle is applied. Furthermore, spatially tunable porous structures and functionally graded parts are printed by using the printing path to set the inter-filament porosity as well as an inorganic space-holder as an intra-filament porogen.