Kaixin Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kaixin Liu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Bin Wang
Oil Production Technology Research Institute, PetroChina Xinjiang Oilfield Company, Karamay 834000, China
1 shared publication - Binfei Li
School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China
1 shared publication - Jianmin Li
Oil Production Technology Research Institute, Xinjiang Oilfield Company, PetroChina, Karamay 834000, China
1 shared publication - Jingfeng Dong
Oil Production Technology Research Institute, PetroChina Xinjiang Oilfield Company, Karamay 834000, China
1 shared publication - Kun Liu
Mahu Exploration and Development Project Department, PetroChina Xinjiang Oilfield Company, Karamay 834000, China
1 shared publication - Li Yang
State Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum (Beijing), Beijing 102249, China
1 shared publication
Latest Publications
- Open Access
The Variation Law of Mineral Composition and Pore Structure in the Shale Oil of Mabei Fengcheng Formation Under the Action of CO2
This study investigates the effects of CO2–water–rock interactions on shale oil reservoirs, specifically focusing on the mineral dissolution and pore structure alterations in shale samples from the second section of the Permian Fengcheng Formation in the Mahu Depression, Junggar Basin. Core soaking experiments were conducted under high-temperature and high-pressure conditions to simulate reservoir environments. Mineral evolution, ion migration, and microstructural changes were qualitatively and quantitatively analyzed using X-ray Diffraction (XRD), Inductively Coupled Plasma (ICP) spectroscopy, and Scanning Electron Microscopy (SEM). The findings indicate that CO2-induced mineral dissolution follows a distinct sequence: calcite > dolomite > potassium feldspar > sodium feldspar, which is directly reflected in the concentration of ions (Ca2+ > Mg2+ > K+ > Na+) in the solution. The dissolution rate and pore structure enhancement are significantly influenced by lamina density, with dolomitic rocks with high lamina density showing greater dissolution and porosity increase, and the lamina area greater than the matrix area. This study demonstrates that the dynamic changes of rock minerals are the core mechanism for controlling the pore structure of reservoirs, showing how CO2–water–rock reaction enhances the porosity and connectivity of shale reservoirs, thereby improving oil recovery potential.
Open AccessThe Variation Law of Mineral Composition and Pore Structure in the Shale Oil of Mabei Fengcheng Formation Under the Action of CO2
This study investigates the effects of CO2–water–rock interactions on shale oil reservoirs, specifically focusing on the mineral dissolution and pore structure alterations in shale samples from the second section of the Permian Fengcheng Formation in the Mahu Depression, Junggar Basin. Core soaking experiments were conducted under high-temperature and high-pressure conditions to simulate reservoir environments. Mineral evolution, ion migration, and microstructural changes were qualitatively and quantitatively analyzed using X-ray Diffraction (XRD), Inductively Coupled Plasma (ICP) spectroscopy, and Scanning Electron Microscopy (SEM). The findings indicate that CO2-induced mineral dissolution follows a distinct sequence: calcite > dolomite > potassium feldspar > sodium feldspar, which is directly reflected in the concentration of ions (Ca2+ > Mg2+ > K+ > Na+) in the solution. The dissolution rate and pore structure enhancement are significantly influenced by lamina density, with dolomitic rocks with high lamina density showing greater dissolution and porosity increase, and the lamina area greater than the matrix area. This study demonstrates that the dynamic changes of rock minerals are the core mechanism for controlling the pore structure of reservoirs, showing how CO2–water–rock reaction enhances the porosity and connectivity of shale reservoirs, thereby improving oil recovery potential.
- Open Access
Experimental Study on Stress Sensitivity in Fractured Tight Conglomerate Reservoirs
Tight conglomerate reservoirs are characterized by dense lithology, significant compositional contrasts between cement and gravel, strong stress gravel content, strong heterogeneity, and uneven spatial distribution, which collectively result in low porosity, complex pore–throat structures, and low permeability. After hydraulic fracturing, the stress sensitivity of tight conglomerate reservoirs is jointly governed by the rock matrix and induced fractures. In this study, the Mahu tight conglomerate reservoir in the Xinjiang Oilfield was selected as the research target. Stress sensitivity experiments were conducted on conglomerate matrix cores and on cores with varying fracture conditions. After stress loading, the degrees of permeability damage of the matrix, through-fracture, double short-fracture, and microfracture cores were 41%, 69%, 93%, and 97%, respectively. The matrix exhibited moderate-to-weak stress sensitivity, the through-fracture cores showed moderate-to-strong stress sensitivity, while the double short-fracture and microfracture cores exhibited strong stress sensitivity. Experimental results indicate that when fractures are present, the stress sensitivity of the core is primarily controlled by fracture closure and matrix compression. As fracture development increases, core permeability is significantly enhanced; however, stress sensitivity also increases accordingly. Under net stress, gravel protrusions embed into fracture surfaces, reducing surface roughness, while irreversible alteration of fracture geometry becomes the dominant factor driving stress sensitivity in fractured cores. These findings provide a scientific basis for predicting stress-sensitivity-induced damage in tight conglomerate reservoirs.
Open AccessExperimental Study on Stress Sensitivity in Fractured Tight Conglomerate Reservoirs
Tight conglomerate reservoirs are characterized by dense lithology, significant compositional contrasts between cement and gravel, strong stress gravel content, strong heterogeneity, and uneven spatial distribution, which collectively result in low porosity, complex pore–throat structures, and low permeability. After hydraulic fracturing, the stress sensitivity of tight conglomerate reservoirs is jointly governed by the rock matrix and induced fractures. In this study, the Mahu tight conglomerate reservoir in the Xinjiang Oilfield was selected as the research target. Stress sensitivity experiments were conducted on conglomerate matrix cores and on cores with varying fracture conditions. After stress loading, the degrees of permeability damage of the matrix, through-fracture, double short-fracture, and microfracture cores were 41%, 69%, 93%, and 97%, respectively. The matrix exhibited moderate-to-weak stress sensitivity, the through-fracture cores showed moderate-to-strong stress sensitivity, while the double short-fracture and microfracture cores exhibited strong stress sensitivity. Experimental results indicate that when fractures are present, the stress sensitivity of the core is primarily controlled by fracture closure and matrix compression. As fracture development increases, core permeability is significantly enhanced; however, stress sensitivity also increases accordingly. Under net stress, gravel protrusions embed into fracture surfaces, reducing surface roughness, while irreversible alteration of fracture geometry becomes the dominant factor driving stress sensitivity in fractured cores. These findings provide a scientific basis for predicting stress-sensitivity-induced damage in tight conglomerate reservoirs.
- Open Access
Important Insights on Fracturing Interference in Tight Conglomerate Reservoirs
Accurate understanding of natural fractures, faults, in situ stress, and mechanical properties of reservoir rocks is a prerequisite for evaluating well interference. During hydraulic fracturing, hydraulic fractures may connect with natural fractures or fault zones, leading to communication with adjacent wells and resulting in cross-well interference. Additionally, horizontal well spacing is a critical factor influencing the occurrence and severity of interference. The Mahu tight oil reservoir experiences severe fracturing interference issues, presenting multiple challenges. This study employs numerical simulation methods to quantitatively assess the influence of geological and engineering factors, including reservoir depletion volume, well spacing, natural fractures, and fracturing operation parameters on fracturing interference intensity. By integrating geological data, engineering parameters, and production data with microseismic monitoring and pressure information, this research aims to clarify key influencing factors and elucidate the fundamental mechanisms governing fracturing-driven interference occurrences. Through production performance analysis and microseismic monitoring, it has been established that well spacing, fracturing intensity, and natural fracture networks are the primary factors affecting interference in hydraulically fractured horizontal wells.
Open AccessImportant Insights on Fracturing Interference in Tight Conglomerate Reservoirs
Accurate understanding of natural fractures, faults, in situ stress, and mechanical properties of reservoir rocks is a prerequisite for evaluating well interference. During hydraulic fracturing, hydraulic fractures may connect with natural fractures or fault zones, leading to communication with adjacent wells and resulting in cross-well interference. Additionally, horizontal well spacing is a critical factor influencing the occurrence and severity of interference. The Mahu tight oil reservoir experiences severe fracturing interference issues, presenting multiple challenges. This study employs numerical simulation methods to quantitatively assess the influence of geological and engineering factors, including reservoir depletion volume, well spacing, natural fractures, and fracturing operation parameters on fracturing interference intensity. By integrating geological data, engineering parameters, and production data with microseismic monitoring and pressure information, this research aims to clarify key influencing factors and elucidate the fundamental mechanisms governing fracturing-driven interference occurrences. Through production performance analysis and microseismic monitoring, it has been established that well spacing, fracturing intensity, and natural fracture networks are the primary factors affecting interference in hydraulically fractured horizontal wells.