Thomas Reindl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Thomas Reindl has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Peter Mayr
Technical University of Munich
6 shared publications - Nico Hempel
Chair of Materials Engineering of Additive Manufacturing, TUM School of Engineering and Design, Technical University of Munich, Garching, Germany
4 shared publications - Josip Vincic
Chair of Materials Engineering of Additive Manufacturing, TUM School of Engineering and Design, Technical University of Munich, Freisinger Landstraße 52, 85748 Garching, Germany
3 shared publications - Stefan Rotzsche
TUM School of Engineering and Design, Chair of Materials Engineering of Additive Manufacturing, Technical University of Munich, Munich, Germany
3 shared publications A. Aslam
1 shared publication- Alice Bastos da Silva Fanta
Center for Electron Nanoscopy, Technical University of Denmark, Kgs. Lyngby, Denmark
1 shared publication
Latest Publications
- Open Access
- 16 November 2026
- Published by Springer Nature in Welding in the World
Microstructure and mechanical performance of functionally graded low-alloy steel structures produced by tandem wire-arc directed energy deposition
Functionally Graded Additive Manufacturing (FGAM) offers the potential to create high-performance engineering components with locally optimized material properties. While this technology promises significant advancements, the development of reliable grading strategies for low-alloy steel systems remains insufficiently researched. This study investigates the feasibility of producing functionally graded material (FGM) components using Tandem wire-arc directed energy deposition (T-WA-DED) by precisely controlling wire feed ratios. A baseline was established through various single and tandem-wire reference experiments, including assessments of lead and trail electrode arrangements to ensure process stability. Using ER70 and ER120 filler wires, low-alloy steel gradients were fabricated in both the welding (GW) and build (GB) directions, with lengths of up to 140 mm. The resulting structures were systematically investigated using optical emission spectrometry (OES), optical microscopy (OM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX), complemented by Vickers hardness mappings and tensile tests. Finally, mechanical performance was compared with theoretical predictions based on wire volume fractions and evaluated using regression analysis. The results confirm that functional gradients achieve superior mechanical integrity compared to discrete bimetallic transitions by effectively mitigating stress concentrations at interfacial boundaries. Experimental findings indicate that 8–16 mm welding-direction gradients provide a good balance between yield strength and ductility. Furthermore, the hardness profiles exhibit a reliable linear trend that remains consistent with mathematical prediction models. This study provides a validated predictive framework for low-alloy steel gradients. By successfully correlating localized microstructural evolution with mechanical properties, it enables the reliable integration of FGM components into robust structural design.
- 16 November 2026
- Published by Springer Nature in Welding in the World
Open AccessMicrostructure and mechanical performance of functionally graded low-alloy steel structures produced by tandem wire-arc directed energy deposition
Functionally Graded Additive Manufacturing (FGAM) offers the potential to create high-performance engineering components with locally optimized material properties. While this technology promises significant advancements, the development of reliable grading strategies for low-alloy steel systems remains insufficiently researched. This study investigates the feasibility of producing functionally graded material (FGM) components using Tandem wire-arc directed energy deposition (T-WA-DED) by precisely controlling wire feed ratios. A baseline was established through various single and tandem-wire reference experiments, including assessments of lead and trail electrode arrangements to ensure process stability. Using ER70 and ER120 filler wires, low-alloy steel gradients were fabricated in both the welding (GW) and build (GB) directions, with lengths of up to 140 mm. The resulting structures were systematically investigated using optical emission spectrometry (OES), optical microscopy (OM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX), complemented by Vickers hardness mappings and tensile tests. Finally, mechanical performance was compared with theoretical predictions based on wire volume fractions and evaluated using regression analysis. The results confirm that functional gradients achieve superior mechanical integrity compared to discrete bimetallic transitions by effectively mitigating stress concentrations at interfacial boundaries. Experimental findings indicate that 8–16 mm welding-direction gradients provide a good balance between yield strength and ductility. Furthermore, the hardness profiles exhibit a reliable linear trend that remains consistent with mathematical prediction models. This study provides a validated predictive framework for low-alloy steel gradients. By successfully correlating localized microstructural evolution with mechanical properties, it enables the reliable integration of FGM components into robust structural design.
- Open Access
- 18 September 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (9) , 362
Multi-Sensor Correlation of Torch Orientation and Energy Distribution for Tailored Process Manipulation in Arc-Based Directed Energy Deposition
Wire-arc directed energy deposition (WA-DED) using dynamic multi-axis hardware is typically restricted to a neutral position (90°), limiting process flexibility and full exploitation of multi-axis capabilities. To unlock torch positioning and stick-out distance as levers for tailored process manipulation, this study examines energy distribution across 124 samples using ER70S-6 filler wire. A 6 × 6 process window spanning wire feed speed (WFS = 2–7 m/min) and travel speed (v = 400–900 mm/min) was evaluated alongside continuous stick-out ramps (5–35 mm) and ten torch inclinations in push (45°, 60°, 75°), neutral (90°), drag (105°, 120°, 135°), and lateral (L15°, L30°, L45°) orientations. A synchronized multi-sensor framework captured electrical, thermographic, and melt pool dynamics while integrating airborne sound acoustic monitoring of process instabilities. Metallographic cross-sections, microhardness mapping, and EBSD grain analysis indicated microstructural shifts. Across the parameter matrix, volumetric energy density (VED) remained within 19–23 J/mm3 (measured), while thermal tracking revealed progressive heat accumulation. Stick-out extensions reduced heat input by 1.1–1.5%/mm, raising peak hardness in single beads from 290–310 HV to 350–385 HV. Torch orientation redistributed thermal energy at nearly constant heat and mass input. In the walls tested, melt pool length shifted by up to 30% and mean grain size by 11.1%, and penetration depth followed the push to drag sequence. Short-circuit frequency and cycle-period variation mirrored the approach to the humping limit, and acoustic envelope statistics accompanied overmelting. Thus, torch orientation and stick-out provide sensor-observable levers to influence process dynamics and component properties.
- 18 September 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (9) , 362
Open AccessMulti-Sensor Correlation of Torch Orientation and Energy Distribution for Tailored Process Manipulation in Arc-Based Directed Energy Deposition
Wire-arc directed energy deposition (WA-DED) using dynamic multi-axis hardware is typically restricted to a neutral position (90°), limiting process flexibility and full exploitation of multi-axis capabilities. To unlock torch positioning and stick-out distance as levers for tailored process manipulation, this study examines energy distribution across 124 samples using ER70S-6 filler wire. A 6 × 6 process window spanning wire feed speed (WFS = 2–7 m/min) and travel speed (v = 400–900 mm/min) was evaluated alongside continuous stick-out ramps (5–35 mm) and ten torch inclinations in push (45°, 60°, 75°), neutral (90°), drag (105°, 120°, 135°), and lateral (L15°, L30°, L45°) orientations. A synchronized multi-sensor framework captured electrical, thermographic, and melt pool dynamics while integrating airborne sound acoustic monitoring of process instabilities. Metallographic cross-sections, microhardness mapping, and EBSD grain analysis indicated microstructural shifts. Across the parameter matrix, volumetric energy density (VED) remained within 19–23 J/mm3 (measured), while thermal tracking revealed progressive heat accumulation. Stick-out extensions reduced heat input by 1.1–1.5%/mm, raising peak hardness in single beads from 290–310 HV to 350–385 HV. Torch orientation redistributed thermal energy at nearly constant heat and mass input. In the walls tested, melt pool length shifted by up to 30% and mean grain size by 11.1%, and penetration depth followed the push to drag sequence. Short-circuit frequency and cycle-period variation mirrored the approach to the humping limit, and acoustic envelope statistics accompanied overmelting. Thus, torch orientation and stick-out provide sensor-observable levers to influence process dynamics and component properties.
- Open Access
- 16 February 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (3) , 3055-3056
Correction: Development and evaluation of an advanced wire-arc directed energy deposition process with integrated temperature control and in-situ heat treatment
- 16 February 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (3) , 3055-3056
Open AccessCorrection: Development and evaluation of an advanced wire-arc directed energy deposition process with integrated temperature control and in-situ heat treatment
- Open Access
- 14 January 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (3) , 2315-2329
Development and evaluation of an advanced wire-arc directed energy deposition process with integrated temperature control and in-situ heat treatment
The acceptance of Directed Energy Deposition with Arc (DED-Arc) in industrial applications is increasing due to ongoing research and development. A key challenge is maintaining temperature control, which affects process efficiency, sustainability, and the properties of the components. There is a need to actively modify the thermal conditions during the process to flexibly optimize the manufacturing quality and efficiency. This work aims to design and validate an advanced wire-based DED-Arc process with closed-loop temperature control and in-situ heat treatment for various applications. The existing DED-Arc system was enhanced by integrating cobot-guided in-situ cooling with nitrogen, water, and air, as well as an inductor for localized heat input. Different control configurations were applied to enable a fully automated temperature-controlled process. The findings show that the basic in-situ cooling concepts can reduce waiting times by up to $$\:\sim$$ 65%. Scaling and integrating these concepts into a control system enabled the production of components using ER100S-G without any cooling pauses, despite an interlayer temperature of ≤ 200 °C. Compared to the reference without thermal management, specific in-situ cooling increased the offset yield strength (R p0.2 ) by over 100 MPa, while targeted heat input raised the plastic elongation at fracture to over 40%. It was also possible to precisely demonstrate heat treatment with significantly varying hardness profiles of up to 150 HV and corresponding microstructural and phase changes within a single component. Validation tests showed that temperature control can effectively optimize the DED-Arc process, emphasizing the need for further research on flexible, autonomous thermal management.- 14 January 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (3) , 2315-2329
Open AccessDevelopment and evaluation of an advanced wire-arc directed energy deposition process with integrated temperature control and in-situ heat treatment
The acceptance of Directed Energy Deposition with Arc (DED-Arc) in industrial applications is increasing due to ongoing research and development. A key challenge is maintaining temperature control, which affects process efficiency, sustainability, and the properties of the components. There is a need to actively modify the thermal conditions during the process to flexibly optimize the manufacturing quality and efficiency. This work aims to design and validate an advanced wire-based DED-Arc process with closed-loop temperature control and in-situ heat treatment for various applications. The existing DED-Arc system was enhanced by integrating cobot-guided in-situ cooling with nitrogen, water, and air, as well as an inductor for localized heat input. Different control configurations were applied to enable a fully automated temperature-controlled process. The findings show that the basic in-situ cooling concepts can reduce waiting times by up to $$\:\sim$$ 65%. Scaling and integrating these concepts into a control system enabled the production of components using ER100S-G without any cooling pauses, despite an interlayer temperature of ≤ 200 °C. Compared to the reference without thermal management, specific in-situ cooling increased the offset yield strength (R p0.2 ) by over 100 MPa, while targeted heat input raised the plastic elongation at fracture to over 40%. It was also possible to precisely demonstrate heat treatment with significantly varying hardness profiles of up to 150 HV and corresponding microstructural and phase changes within a single component. Validation tests showed that temperature control can effectively optimize the DED-Arc process, emphasizing the need for further research on flexible, autonomous thermal management. - Open Access
- 13 June 2025
- Published by Springer Nature in Welding in the World
- Vol. 69 (12) , 3745-3760
Effect of substrate preheating and in situ cooling on dimensional accuracy, microstructure, and hardness of wire-arc directed energy deposition components
Arc-based directed energy deposition (DED-Arc) is a promising manufacturing technology on the rise in the industry. On the one hand, convincing process advantages, such as the possibility of sustainably producing complex and large-volume component geometries with comparatively high building rates, favor further industrial interest. On the other hand, there are still challenges, like the difficulty of controlling heat input and the intricate thermal history. The resulting temperature gradients and heat accumulations lead to inhomogeneous component properties and reduced process efficiency, which delays further establishment in the manufacturing industry. Therefore, implementing and developing concepts for thermal management in DED-Arc is necessary. The study examines how controlling the substrate temperature can affect the dimensional accuracy, microstructure, and hardness of DED-Arc components. Different preheating and in situ cooling strategies were developed based on numerical investigations, including a water-cooled in situ cooling unit, a cobot-guided inductor, and classical preheating approaches. The findings indicate that substrate tempering significantly impacts the penetration zone and heat-affected zone dimensions, layer widths, microstructure, and hardness profiles. A special combination of preheating and in situ cooling resulted in enhanced substrate bonding, uniform layer widths (4.0 ± 0.1) mm, and consistent hardness values (142 ± 10) HV due to a more uniform microstructure. These results indicate that integrated substrate plate tempering can significantly improve thermal process control in DED-Arc, supporting its further industrial establishment.
- 13 June 2025
- Published by Springer Nature in Welding in the World
- Vol. 69 (12) , 3745-3760
Open AccessEffect of substrate preheating and in situ cooling on dimensional accuracy, microstructure, and hardness of wire-arc directed energy deposition components
Arc-based directed energy deposition (DED-Arc) is a promising manufacturing technology on the rise in the industry. On the one hand, convincing process advantages, such as the possibility of sustainably producing complex and large-volume component geometries with comparatively high building rates, favor further industrial interest. On the other hand, there are still challenges, like the difficulty of controlling heat input and the intricate thermal history. The resulting temperature gradients and heat accumulations lead to inhomogeneous component properties and reduced process efficiency, which delays further establishment in the manufacturing industry. Therefore, implementing and developing concepts for thermal management in DED-Arc is necessary. The study examines how controlling the substrate temperature can affect the dimensional accuracy, microstructure, and hardness of DED-Arc components. Different preheating and in situ cooling strategies were developed based on numerical investigations, including a water-cooled in situ cooling unit, a cobot-guided inductor, and classical preheating approaches. The findings indicate that substrate tempering significantly impacts the penetration zone and heat-affected zone dimensions, layer widths, microstructure, and hardness profiles. A special combination of preheating and in situ cooling resulted in enhanced substrate bonding, uniform layer widths (4.0 ± 0.1) mm, and consistent hardness values (142 ± 10) HV due to a more uniform microstructure. These results indicate that integrated substrate plate tempering can significantly improve thermal process control in DED-Arc, supporting its further industrial establishment.