Saltanat Ashimova

Oil-contaminated soils represent a significant environmental challenge due to the presence of petroleum hydrocarbons and associated pollutants. At the same time, such materials may contain valuable hydrocarbon-rich organic fractions that can potentially be recovered and reused. In this study, the organic phase extracted from oil-contaminated soil was investigated as a secondary hydrocarbon resource for the production of bitumen-like materials. The extracted organic phase was subjected to thermal oxidation to obtain a bitumen-like material, followed by modification using road bitumen (BND 50/70) and an SBS polymer. The resulting bitumen-like material exhibited improved performance after modification, with the softening point increasing from 32.1 to 40.6 °C, the rotational viscosity from 3.11 to 101.5 Pa·s, and enhanced high-temperature rutting resistance. The structural and compositional characteristics of the obtained materials were analyzed using FTIR spectroscopy, nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), and Saturates, Aromatics, Resins, and Asphaltenes (SARA) fractionation. Physicomechanical and rheological properties were evaluated using penetration, softening point, rotational viscosity, and dynamic shear rheometer (DSR) measurements. The results indicate the presence of aliphatic and aromatic hydrocarbon-rich structures characteristic of petroleum-derived materials. Modification with road bitumen and SBS resulted in redistribution of SARA fractions and improved physicomechanical and rheological properties, including increased softening point, higher viscosity, and enhanced resistance to permanent deformation at elevated temperatures. Overall, the obtained results demonstrate that oil-contaminated soils can be considered a promising secondary source of hydrocarbon-rich raw materials. The proposed approach combines waste remediation with resource recovery and supports the development of sustainable technologies for the utilization of petroleum-containing wastes within a circular economy framework.

This study explores the potential of oil sludge, a hazardous by-product of the oil industry, as a sustainable rejuvenator for restoring the physicochemical and rheological properties of aged bitumen. Aged binder samples were modified with different concentrations of oil sludge (1%, 3%, and 5%) and analyzed using dynamic shear rheometry (DSR), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The incorporation of 5% oil sludge increased penetration from 60 to 71 mm and the softening point from 55 °C to 72 °C, indicating enhanced flexibility. DSR measurements showed a ~10% decrease in complex modulus (G*) and a slight increase in phase angle, confirming partial rheological recovery. FTIR spectra revealed partial restoration of aliphatic and aromatic functional groups, with a decrease in sulfoxide absorption bands, while SEM analysis indicated improved homogeneity and reduced microcracking. TGA confirmed enhanced thermal behavior and a reduction in residual mass. The novelty of this work lies in the first-time application of regionally sourced oil sludge as a rejuvenator, evaluated through a multiscale analytical framework. These findings demonstrate the dual benefits of performance recovery and hazardous waste valorization, contributing to sustainable road maintenance within a circular economy approach.