HMHuihui Miao

Huihui Miao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huihui Miao has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of High-Speed Cutting Surface Layer Formation and Oxide Layer Thickness Prediction of Titanium Alloy (Ti6Al4V)

    by Chenyu Wang, Changyou Li, Huihui Miao, Zhi Tan, Wei Sun

    This study discusses the surface characteristics of titanium alloy Ti6Al4V during high-speed cutting, especially the effect of cutting speed on surface quality at different measuring scales. The experimental analysis shows that when the feed rate is 0.2 mm, and the detection scale is 1.2 mm, the surface roughness increases first and then decreases with the increase in the cutting speed. When the detection scale is 0.1 mm, the surface roughness continues to increase with the increase in the cutting speed. Based on the experimental results, this study adopted a research method combining experiment and simulation to intensely discuss the difference in the cutting speed’s mechanism of influence on surface quality under different detection scales. Based on the first principles, a prediction model for the oxide layer of high-speed cutting titanium alloy was constructed, and experiments verified the model’s accuracy. It was found that with the increase in the cutting speed, the cutting surface layer gradually formed a metamorphic layer, and the thickness of the oxide layer gradually increased, and it resultantly fell away. At the same time, the change in material microstructure and phase transition worked together to reduce the machining accuracy. In addition, the content of different components significantly affected the formation mechanism of the oxide layer, significantly increasing the Al content, which affected the oxygen diffusion activation energy and the oxide layer’s thickness.


  • Open Access

    Separation Method for Installation Eccentricity Error of Workpiece

    by Guanyao Qiao, Chunyu Zhao, Huihui Miao, Ye Chen

    This work solves the challenge of separating the eccentricity error of a workpiece installation from the first harmonic of radial runout error of the spindle, which has a crucial impact on improving the machining quality of the workpiece. Firstly, a mathematical model for the synthesized elliptical motion for spindle vibration and eccentricity error is established. Subsequently, a novel separation method combining Particle swarm optimization (PSO) and the least squares method (LSM) is proposed. PSO is applied to determine phase angles, and the least squares method is applied to determine amplitudes, achieving precise error separation. Then, numerical simulations were used to verify the effectiveness and reliability of the proposed method, producing a calculation error of less than 0.07% and high consistency (R2 > 0.97). Finally, experimental tests at different spindle speeds, axial distances, and workpieces confirmed the robustness of the method, with a variation in eccentricity error calculation result of less than 0.6%. The results indicate that the installation eccentricity error of the experimental machine tool is independent of the spindle angular velocity and stems from the misalignment of the chuck. This method provides a reliable solution for accurately separating installation eccentricity errors in precision manufacturing.