Yuxiang Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuxiang Zheng has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Qidong Wang
Institute of Microelectronics
5 shared publications - Pei Gan
State Key Laboratory of Fabrication Technologies for Integrated Circuits, Chinese Academy of Sciences, Beijing, China
3 shared publications - Wenwen Zhang
State Key Laboratory of Fabrication Technologies for Integrated Circuits, Chinese Academy of Sciences, Beijing, China
3 shared publications - Chenglin Yang
State Key Laboratory of Fabrication Technologies for Integrated Circuits, Chinese Academy of Sciences, Beijing, China
2 shared publications - Gang Song
State Key Laboratory of Fabrication Technologies for Integrated Circuits, Chinese Academy of Sciences, Beijing, China
2 shared publications - Jun Li
Institute of Microelectronics, Chinese Academy of Sciences
2 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 7 (5) , 1790-1800
A Low-Profile Wideband Metasurface Filtering Antenna With Multiple Radiation Nulls Fabricated by PCB Technology for Sub-THz Applications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 7 (5) , 1790-1800
Open AccessA Low-Profile Wideband Metasurface Filtering Antenna With Multiple Radiation Nulls Fabricated by PCB Technology for Sub-THz Applications
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (6) , 2416-2420
Full W-Band HDI Antenna-in-Package Array Based on a Coplanar Magnetoelectric Dipole
A full W-band antenna-in-package (AiP) array implemented in a six-layer high-density interconnect (HDI) package is presented. The radiator is a coplanar magnetoelectric (ME) dipole in which the electric dipole current and the equivalent magnetic current are synchronously excited on the same layer by a TM10-mode coupling patch. Unlike previously reported slot-based via-free ME dipoles using a resonant λ0/2 ground slot, the proposed magnetic source is a localized subwavelength gap, which suppresses vertical phase detuning and avoids electrically long-slot behavior at the upper W-band. A dual-layer artificial magnetic conductor (AMC) is further embedded as both an in-phase reflection boundary and a functional copper-density compensation structure for multilayer fabrication. Based on the proposed element, an 8×8 array is designed and fabricated. Measurements show an impedance bandwidth of 75–110 GHz (37.8%), a peak realized gain of 22.7 dBi, and stable symmetric broadside radiation across the full W-band. The proposed architecture is well suited for compact W-band HDI-AiP systems.
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (6) , 2416-2420
Full W-Band HDI Antenna-in-Package Array Based on a Coplanar Magnetoelectric Dipole
A full W-band antenna-in-package (AiP) array implemented in a six-layer high-density interconnect (HDI) package is presented. The radiator is a coplanar magnetoelectric (ME) dipole in which the electric dipole current and the equivalent magnetic current are synchronously excited on the same layer by a TM10-mode coupling patch. Unlike previously reported slot-based via-free ME dipoles using a resonant λ0/2 ground slot, the proposed magnetic source is a localized subwavelength gap, which suppresses vertical phase detuning and avoids electrically long-slot behavior at the upper W-band. A dual-layer artificial magnetic conductor (AMC) is further embedded as both an in-phase reflection boundary and a functional copper-density compensation structure for multilayer fabrication. Based on the proposed element, an 8×8 array is designed and fabricated. Measurements show an impedance bandwidth of 75–110 GHz (37.8%), a peak realized gain of 22.7 dBi, and stable symmetric broadside radiation across the full W-band. The proposed architecture is well suited for compact W-band HDI-AiP systems.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (1) , 369-373
A Tri-Mode Magneto-Electric Dipole Antenna Based on High-Density-Interconnect (HDI) Technology for W-Band Applications
This letter presents a tri-mode magneto-electric (ME) dipole antenna based on high-density-interconnect (HDI) technology, offering high integration capability and manufacturability for W-band applications. The proposed antenna achieves broadband operation through tri-mode excitation of electric and magnetic dipole resonances, ensuring stable radiation performance across the band. Two array prototypes are fabricated and tested: a 2 × 2 parallel-fed array, demonstrating a measured bandwidth of 37.1% (75–109.2 GHz) and peak gain of 14.05 dBi; and a 1 × 8 series-fed array exhibits a measured gain of 14.83 dBi and a sidelobe level (SLL) of −15.78 dB at 77 GHz. This letter presents a promising pathway for scalable, broadband, and low SLL antenna-in-package integration at W-band.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (1) , 369-373
A Tri-Mode Magneto-Electric Dipole Antenna Based on High-Density-Interconnect (HDI) Technology for W-Band Applications
This letter presents a tri-mode magneto-electric (ME) dipole antenna based on high-density-interconnect (HDI) technology, offering high integration capability and manufacturability for W-band applications. The proposed antenna achieves broadband operation through tri-mode excitation of electric and magnetic dipole resonances, ensuring stable radiation performance across the band. Two array prototypes are fabricated and tested: a 2 × 2 parallel-fed array, demonstrating a measured bandwidth of 37.1% (75–109.2 GHz) and peak gain of 14.05 dBi; and a 1 × 8 series-fed array exhibits a measured gain of 14.83 dBi and a sidelobe level (SLL) of −15.78 dB at 77 GHz. This letter presents a promising pathway for scalable, broadband, and low SLL antenna-in-package integration at W-band.
- Open Access
- 1 June 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (6)
Bandwidth enhancement for Ka-band metasurface antenna using bound TM10 and TE20 resonances and decoupled antiphase TM20 resonance
A bandwidth enhancement mechanism based on metasurface (MTS) is proposed. The pre-designed stack-patch determines the baseline bandwidth limitation. The triple resonances of MTS enhance the in-band impedance match. The E-plane MTS dominates the lowest bound transverse magnetic (TM) TM10 leaky-wave resonance. The H-plane MTS facilitates the adjustment of the middle decoupled antiphase TM20 resonance. The cavity size along the H-field direction determines the highest bound transverse electric (TE) TE20 surface-wave resonance. Using the proposed physical model, a miniaturized antenna configuration is designed and implemented. A capacitance-loaded mechanism reveals the feasibility of MTS miniaturization. The interaction of MTS modes achieves a larger −10 dB impedance bandwidth (IMBW) of 40.1% or a larger −15 dB IMBW of 25.7% with high manufacturing robustness, demonstrating the suitability of millimeter-wave antennas for broadband applications. According to the −15 dB IMBW design standard, a fabricated antenna features a compact aperture size of 0.47λ0× 0.47λ0 and a low profile of 0.063λ0 (λ0 is the free space wavelength at the center operating frequency, and profile is the distance from the first metal layer to GND). This design shows significant potential for Ka-band antenna-in-package (AiP) applications in 5.5G communication systems.
- 1 June 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (6)
Open AccessBandwidth enhancement for Ka-band metasurface antenna using bound TM10 and TE20 resonances and decoupled antiphase TM20 resonance
A bandwidth enhancement mechanism based on metasurface (MTS) is proposed. The pre-designed stack-patch determines the baseline bandwidth limitation. The triple resonances of MTS enhance the in-band impedance match. The E-plane MTS dominates the lowest bound transverse magnetic (TM) TM10 leaky-wave resonance. The H-plane MTS facilitates the adjustment of the middle decoupled antiphase TM20 resonance. The cavity size along the H-field direction determines the highest bound transverse electric (TE) TE20 surface-wave resonance. Using the proposed physical model, a miniaturized antenna configuration is designed and implemented. A capacitance-loaded mechanism reveals the feasibility of MTS miniaturization. The interaction of MTS modes achieves a larger −10 dB impedance bandwidth (IMBW) of 40.1% or a larger −15 dB IMBW of 25.7% with high manufacturing robustness, demonstrating the suitability of millimeter-wave antennas for broadband applications. According to the −15 dB IMBW design standard, a fabricated antenna features a compact aperture size of 0.47λ0× 0.47λ0 and a low profile of 0.063λ0 (λ0 is the free space wavelength at the center operating frequency, and profile is the distance from the first metal layer to GND). This design shows significant potential for Ka-band antenna-in-package (AiP) applications in 5.5G communication systems.
- 10 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Integrated low-profile antenna covering 29-50 GHz band for 5G millimeter-wave application
For the application of 5G millimeter-wave communication, an integrated low-profile antenna covering 29-50 GHz band is proposed. Four metallized layers and four dielectric layers are used to constitute the integrated antenna. The integrated antenna is manufactured by printed circuit board (PCB) technology due to the simple process. A reference antenna with identical dielectric substrates and similar metallic structures is developed for comparison. The profile of the integrated antenna is 0.07λ0 (At 39 GHz, the free space wavelength is λ0). The integrated antenna generates four resonances in a continuous frequency band, and the impedance bandwidth ranges from 28.3 to 50.1 GHz (about 56% relative bandwidth), where |S11| is lower than -10 dB. The integrated antenna reveals the broadband characteristic and has stable broadside radiation patterns within the band. At 45 GHz, the integrated antenna achieves the maximum gain of 10.8 dBi. The integrated broadband antenna with a low profile is suitable for the antenna-in-package application in 5G millimeter-wave band.
- 10 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Integrated low-profile antenna covering 29-50 GHz band for 5G millimeter-wave application
For the application of 5G millimeter-wave communication, an integrated low-profile antenna covering 29-50 GHz band is proposed. Four metallized layers and four dielectric layers are used to constitute the integrated antenna. The integrated antenna is manufactured by printed circuit board (PCB) technology due to the simple process. A reference antenna with identical dielectric substrates and similar metallic structures is developed for comparison. The profile of the integrated antenna is 0.07λ0 (At 39 GHz, the free space wavelength is λ0). The integrated antenna generates four resonances in a continuous frequency band, and the impedance bandwidth ranges from 28.3 to 50.1 GHz (about 56% relative bandwidth), where |S11| is lower than -10 dB. The integrated antenna reveals the broadband characteristic and has stable broadside radiation patterns within the band. At 45 GHz, the integrated antenna achieves the maximum gain of 10.8 dBi. The integrated broadband antenna with a low profile is suitable for the antenna-in-package application in 5G millimeter-wave band.