Stefan N. Kerasov
Stefan N. Kerasov has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Mariam S. Galstyan
Russian University of Medicine
3 shared publications - Evgeniy Vyacheslavovich Kostyrin
Bauman Moscow State Technical University
2 shared publications - Sergey A. Arutyunov
Russian University of Medicine
2 shared publications - Sergey Darchoevich Arutyunov
Federal State Budgetary Educational Institution of Higher Education «Russian University of Medicine» of the Ministry of Health of Russia
2 shared publications - Yaser N. Kharakh
Russian University of Medicine
2 shared publications - Daniil Rozanov
Bauman Moscow State Technical University
1 shared publication
Latest Publications
- 31 March 2026
- Published by Clinical Dentistry in Clinical Dentistry (Russia)
- Vol. 29 (1) , 6-13
Inactivation of Staphylococcus aureus, Escherichia coli, and Candida albicans in a sub- and supercritical carbon dioxide environment: response surface analysis
Infection control in dentistry requires effective methods for instrument processing. Traditional methods (autoclaving, chemical disinfection) have limitations: metal corrosion, prolonged exposure time, and toxicity. Supercritical carbon dioxide (scCO2) is considered as an alternative; however, systematic data on comparative susceptibility of different pathogens to gas-dynamic treatment are lacking. The aim of this study was to evaluate the factor-dependent and comparative efficacy of gas-dynamic inactivation of S. aureus, E. coli, and C. albicans in subcritical and supercritical carbon dioxide. Materials and methods. Reference strains S. aureus ATCC 25923, E. coli ATCC 25922, and C. albicans ATCC 10231 were used. Central composite design with three factors was applied: temperature 25—50°C, pressure 10—100 atm, and exposure time 10—60 minutes. The experimental matrix included 20 points. Titanium disks were contaminated with standardized microbial suspensions. Efficacy was assessed by log-reduction values. Regression models were constructed using response surface methodology with stepwise factor selection. Results. Gas-dynamic treatment provided statistically significant inactivation of all microorganisms (p<0,001). Median log reduction values were: E. coli — 2,30 log10, C. albicans — 1,57 log10, S. aureus — 1,25 log10. Pressure was the only significant predictor: for S. aureus, a nonlinear relationship with quadratic effect was revealed (p = 0,029); for E. coli, a linear trend (p = 0,092); for C. albicans, no relationship was detected. Temperature and exposure time had no effect. Conclusions. Significant differences in microbial susceptibility to gas-dynamic treatment were identified: gram-negative bacteria are most susceptible, with pressure being the key technological parameter. The method shows potential for application in dentistry but requires validation under conditions closer to clinical practice.
- 31 March 2026
- Published by Clinical Dentistry in Clinical Dentistry (Russia)
- Vol. 29 (1) , 6-13
Inactivation of Staphylococcus aureus, Escherichia coli, and Candida albicans in a sub- and supercritical carbon dioxide environment: response surface analysis
Infection control in dentistry requires effective methods for instrument processing. Traditional methods (autoclaving, chemical disinfection) have limitations: metal corrosion, prolonged exposure time, and toxicity. Supercritical carbon dioxide (scCO2) is considered as an alternative; however, systematic data on comparative susceptibility of different pathogens to gas-dynamic treatment are lacking. The aim of this study was to evaluate the factor-dependent and comparative efficacy of gas-dynamic inactivation of S. aureus, E. coli, and C. albicans in subcritical and supercritical carbon dioxide. Materials and methods. Reference strains S. aureus ATCC 25923, E. coli ATCC 25922, and C. albicans ATCC 10231 were used. Central composite design with three factors was applied: temperature 25—50°C, pressure 10—100 atm, and exposure time 10—60 minutes. The experimental matrix included 20 points. Titanium disks were contaminated with standardized microbial suspensions. Efficacy was assessed by log-reduction values. Regression models were constructed using response surface methodology with stepwise factor selection. Results. Gas-dynamic treatment provided statistically significant inactivation of all microorganisms (p<0,001). Median log reduction values were: E. coli — 2,30 log10, C. albicans — 1,57 log10, S. aureus — 1,25 log10. Pressure was the only significant predictor: for S. aureus, a nonlinear relationship with quadratic effect was revealed (p = 0,029); for E. coli, a linear trend (p = 0,092); for C. albicans, no relationship was detected. Temperature and exposure time had no effect. Conclusions. Significant differences in microbial susceptibility to gas-dynamic treatment were identified: gram-negative bacteria are most susceptible, with pressure being the key technological parameter. The method shows potential for application in dentistry but requires validation under conditions closer to clinical practice.
- Open Access
- 21 September 2025
- Published by Clinical Dentistry in Clinical Dentistry (Russia)
- Vol. 28 (3) , 167-174
The principles of controlling the effectiveness of instrument disinfection in dentistry
Dental clinical practice creates an extremely high risk of developing and transmitting nosocomial infections and requires special attention to their prevention and control. In this paper we analyze the data of current literature characterizing the features of measures for instruments disinfection in dentistry and ways to control its effectiveness. Disinfection of medical instruments occupies one of the leading places in the system of measures for the prevention of cross-infection among doctors, patients and service personnel. The need to analyze this system of measures in modern dentistry is associated with a significant improvement in the technological provision of dental care to the patient, an increase in the level of knowledge in the field of its influence on the possibility of infectious agents transmission, the emergence of new methods of sterilization and disinfection and control of their microbiological effectiveness. Conclusions. The peculiarities of modern approaches to instruments disinfection in dentistry are determined by the invasive nature of therapeutic measures, as well as the need to adapt methods of sterilization, disinfection, and their microbiological control to the composition, design, and purpose of the instruments.
- 21 September 2025
- Published by Clinical Dentistry in Clinical Dentistry (Russia)
- Vol. 28 (3) , 167-174
Open AccessThe principles of controlling the effectiveness of instrument disinfection in dentistry
Dental clinical practice creates an extremely high risk of developing and transmitting nosocomial infections and requires special attention to their prevention and control. In this paper we analyze the data of current literature characterizing the features of measures for instruments disinfection in dentistry and ways to control its effectiveness. Disinfection of medical instruments occupies one of the leading places in the system of measures for the prevention of cross-infection among doctors, patients and service personnel. The need to analyze this system of measures in modern dentistry is associated with a significant improvement in the technological provision of dental care to the patient, an increase in the level of knowledge in the field of its influence on the possibility of infectious agents transmission, the emergence of new methods of sterilization and disinfection and control of their microbiological effectiveness. Conclusions. The peculiarities of modern approaches to instruments disinfection in dentistry are determined by the invasive nature of therapeutic measures, as well as the need to adapt methods of sterilization, disinfection, and their microbiological control to the composition, design, and purpose of the instruments.
- Open Access
- 29 August 2025
- Published by ECO-Vector LLC (Publications) in Russian Journal of Dentistry
- Vol. 29 (4) , 368-375
Clinical and economic justification for managerial decisions on replacing corroded dental instruments
BACKGROUND: Corrosion of dental instruments reduces their functionality and salvage value, prompting the need for timely managerial decisions regarding replacement or restoration. In the absence of an objective framework for assessing the clinical and economic viability of these options, the risk of inefficient spending increases. AIM: To provide a clinical and economic rationale for restoring corroded dental instruments rather than disposing of them. METHODS: A mathematical model was developed based on a formula incorporating the costs of restoration, disposal, depreciation, and the extended service life of instruments following restoration. A Python-based software algorithm was implemented to visualize outcomes using a clinical-economic feasibility matrix. Scenario analyses were conducted across varying cost parameters and service life extensions. RESULTS: The developed software determines the economic feasibility of instrument restoration under specific conditions. For example, if disposal costs are 10%, restoration costs are 80%, and depreciation is estimated at 15% of the instrument’s original value, restoration is deemed economically viable if the post-restoration service life increases by at least 76% of the standard operational life. The algorithm also identifies threshold cost values favoring restoration over replacement. CONCLUSION: An innovative decision-making model was developed, incorporating both mathematical and software algorithms to assess the feasibility of restoring dental instruments. Findings indicate that, when a significant extension in service life is achievable, restoration is more cost-effective than purchasing new instruments. The Python programming environment provides a universal platform for informed decision-making in dental practice.
- 29 August 2025
- Published by ECO-Vector LLC (Publications) in Russian Journal of Dentistry
- Vol. 29 (4) , 368-375
Open AccessClinical and economic justification for managerial decisions on replacing corroded dental instruments
BACKGROUND: Corrosion of dental instruments reduces their functionality and salvage value, prompting the need for timely managerial decisions regarding replacement or restoration. In the absence of an objective framework for assessing the clinical and economic viability of these options, the risk of inefficient spending increases. AIM: To provide a clinical and economic rationale for restoring corroded dental instruments rather than disposing of them. METHODS: A mathematical model was developed based on a formula incorporating the costs of restoration, disposal, depreciation, and the extended service life of instruments following restoration. A Python-based software algorithm was implemented to visualize outcomes using a clinical-economic feasibility matrix. Scenario analyses were conducted across varying cost parameters and service life extensions. RESULTS: The developed software determines the economic feasibility of instrument restoration under specific conditions. For example, if disposal costs are 10%, restoration costs are 80%, and depreciation is estimated at 15% of the instrument’s original value, restoration is deemed economically viable if the post-restoration service life increases by at least 76% of the standard operational life. The algorithm also identifies threshold cost values favoring restoration over replacement. CONCLUSION: An innovative decision-making model was developed, incorporating both mathematical and software algorithms to assess the feasibility of restoring dental instruments. Findings indicate that, when a significant extension in service life is achievable, restoration is more cost-effective than purchasing new instruments. The Python programming environment provides a universal platform for informed decision-making in dental practice.
- 19 June 2025
- Published by Springer Nature
- p. 166-178
Intelligent Analysis of Financial Results Data as a Management Decision Support System
- 19 June 2025
- Published by Springer Nature
- p. 166-178
Intelligent Analysis of Financial Results Data as a Management Decision Support System