Yongfeng Gong
Yongfeng Gong has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Gang Zhang
Ningxia Hui Autonomous Region Land and Resources Survey and Monitoring Institute, Ningxia 750002, China
2 shared publications - Guorui Wang
Ningxia Survey and Monitor Institute of Land and Resources, Yinchuan 750002, China
2 shared publications - Hui Wang
Ningxia Survey and Monitor Institute of Land and Resources, Yinchuan 750002, China
2 shared publications - Shichang Gao
Ningxia Survey and Monitor Institute of Land and Resources, Yinchuan 750002, China
2 shared publications - Xiaofeng He
Ningxia Hui Autonomous Region Land and Resources Survey and Monitoring Institute, Ningxia 750002, China
2 shared publications - Yaoyao Zhang
Chinese Academy of Geological Sciences, Beijing 100037, China
2 shared publications
Latest Publications
- Open Access
- 30 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (13) , 5990
Risk Assessment of Geological Hazards in Dawukou, Shizuishan City Based on the Information Value Model
Geological hazards pose significant threats to ecological stability, human lives, and infrastructure, necessitating precise and robust risk assessment methodologies. This study evaluates geological hazard risks in Dawukou District, Shizuishan City, Ningxia Hui Autonomous Region, using the information value (IV) model. The study systematically identifies susceptibility, hazard, and vulnerability factors influencing geological disaster risks by integrating diverse datasets encompassing geological conditions, meteorological parameters, and anthropogenic activities. The key findings reveal that hilly landforms, slope gradients, and vegetation indices are the dominant contributors to hazard development. Additional factors, including lithology, fault proximity, and precipitation, were also found to play critical roles. The results categorize the district into four risk zones: high-risk areas (1.55% of the total area), moderate-risk areas (10.16%), Low-risk areas (23.32%), and very-low-risk areas (64.97%). These zones exhibit a strong spatial correlation with geomorphic features, tectonic activity, and human engineering interventions, such as mining and infrastructure development. High-risk zones are concentrated near mining regions and fault lines with steep slopes, while low-risk zones are predominantly in flat plains and urban centers. The reliability of the risk assessment was validated through cross-referenced geological hazard occurrence data and Receiver Operating Characteristic (ROC) curve analysis, achieving a high predictive accuracy (AUC = 0.88). The study provides actionable insights for disaster prevention, mitigation strategies, and urban planning, offering a scientific basis for resource allocation and sustainable development. The methodology and findings serve as a replicable framework for geological hazard risk assessments in similar regions facing diverse environmental and anthropogenic challenges.
- 30 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (13) , 5990
Open AccessRisk Assessment of Geological Hazards in Dawukou, Shizuishan City Based on the Information Value Model
Geological hazards pose significant threats to ecological stability, human lives, and infrastructure, necessitating precise and robust risk assessment methodologies. This study evaluates geological hazard risks in Dawukou District, Shizuishan City, Ningxia Hui Autonomous Region, using the information value (IV) model. The study systematically identifies susceptibility, hazard, and vulnerability factors influencing geological disaster risks by integrating diverse datasets encompassing geological conditions, meteorological parameters, and anthropogenic activities. The key findings reveal that hilly landforms, slope gradients, and vegetation indices are the dominant contributors to hazard development. Additional factors, including lithology, fault proximity, and precipitation, were also found to play critical roles. The results categorize the district into four risk zones: high-risk areas (1.55% of the total area), moderate-risk areas (10.16%), Low-risk areas (23.32%), and very-low-risk areas (64.97%). These zones exhibit a strong spatial correlation with geomorphic features, tectonic activity, and human engineering interventions, such as mining and infrastructure development. High-risk zones are concentrated near mining regions and fault lines with steep slopes, while low-risk zones are predominantly in flat plains and urban centers. The reliability of the risk assessment was validated through cross-referenced geological hazard occurrence data and Receiver Operating Characteristic (ROC) curve analysis, achieving a high predictive accuracy (AUC = 0.88). The study provides actionable insights for disaster prevention, mitigation strategies, and urban planning, offering a scientific basis for resource allocation and sustainable development. The methodology and findings serve as a replicable framework for geological hazard risk assessments in similar regions facing diverse environmental and anthropogenic challenges.
- Open Access
- 29 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (13) , 5984
Numerical Simulation and Risk Assessment of Debris Flows in Suyukou Gully, Eastern Helan Mountains, China
Suyukou Gully, located on the eastern slope of the Helan Mountains in northwest China, is a typical debris-flow-prone catchment characterized by a steep terrain, fractured bedrock, and abundant loose colluvial material. The area is subject to intense short-duration convective rainfall events, which often trigger destructive debris flows that threaten the Suyukou Scenic Area. To investigate the dynamics and risks associated with such events, this study employed the FLO-2D two-dimensional numerical model to simulate debris flow propagation, deposition, and hazard distribution under four rainfall return periods (10-, 20-, 50-, and 100-year scenarios). The modeling framework integrated high-resolution digital elevation data (original 5 m DEM resampled to 20 m grid), land-use classification, rainfall design intensities derived from regional storm atlases, and detailed field-based sediment characterization. Rheological and hydraulic parameters, including Manning’s roughness coefficient, yield stress, dynamic viscosity, and volume concentration, were calibrated using post-event geomorphic surveys and empirical formulations. The model was validated against field-observed deposition limits and flow depths, achieving a spatial accuracy within 350 m. Results show that the debris flow mobility and hazard intensity increased significantly with rainfall magnitude. Under the 100-year scenario, the peak discharge reached 1195.88 m3/s, with a maximum flow depth of 20.15 m and velocities exceeding 8.85 m·s−1, while the runout distance surpassed 5.1 km. Hazard zoning based on the depth–velocity (H × V) product indicated that over 76% of the affected area falls within the high-hazard zone. A vulnerability assessment incorporated exposure factors such as tourism infrastructure and population density, and a matrix-based risk classification revealed that 2.4% of the area is classified as high-risk, while 74.3% lies within the moderate-risk category. This study also proposed mitigation strategies, including structural measures (e.g., check dams and channel straightening) and non-structural approaches (e.g., early warning systems and land-use regulation). Overall, the research demonstrates the effectiveness of physically based modeling combined with field observations and a GIS analysis in understanding debris flow hazards and supports informed risk management and disaster preparedness in mountainous tourist regions.
- 29 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (13) , 5984
Open AccessNumerical Simulation and Risk Assessment of Debris Flows in Suyukou Gully, Eastern Helan Mountains, China
Suyukou Gully, located on the eastern slope of the Helan Mountains in northwest China, is a typical debris-flow-prone catchment characterized by a steep terrain, fractured bedrock, and abundant loose colluvial material. The area is subject to intense short-duration convective rainfall events, which often trigger destructive debris flows that threaten the Suyukou Scenic Area. To investigate the dynamics and risks associated with such events, this study employed the FLO-2D two-dimensional numerical model to simulate debris flow propagation, deposition, and hazard distribution under four rainfall return periods (10-, 20-, 50-, and 100-year scenarios). The modeling framework integrated high-resolution digital elevation data (original 5 m DEM resampled to 20 m grid), land-use classification, rainfall design intensities derived from regional storm atlases, and detailed field-based sediment characterization. Rheological and hydraulic parameters, including Manning’s roughness coefficient, yield stress, dynamic viscosity, and volume concentration, were calibrated using post-event geomorphic surveys and empirical formulations. The model was validated against field-observed deposition limits and flow depths, achieving a spatial accuracy within 350 m. Results show that the debris flow mobility and hazard intensity increased significantly with rainfall magnitude. Under the 100-year scenario, the peak discharge reached 1195.88 m3/s, with a maximum flow depth of 20.15 m and velocities exceeding 8.85 m·s−1, while the runout distance surpassed 5.1 km. Hazard zoning based on the depth–velocity (H × V) product indicated that over 76% of the affected area falls within the high-hazard zone. A vulnerability assessment incorporated exposure factors such as tourism infrastructure and population density, and a matrix-based risk classification revealed that 2.4% of the area is classified as high-risk, while 74.3% lies within the moderate-risk category. This study also proposed mitigation strategies, including structural measures (e.g., check dams and channel straightening) and non-structural approaches (e.g., early warning systems and land-use regulation). Overall, the research demonstrates the effectiveness of physically based modeling combined with field observations and a GIS analysis in understanding debris flow hazards and supports informed risk management and disaster preparedness in mountainous tourist regions.
- Open Access
- 6 June 2025
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 13, 1550360
Formation mechanism and risk assessment of debris flow geological disasters in Lihong Road, Litong District, Wuzhong City, Ningxia
The Lihong Road area in Litong District, Wuzhong City, Ningxia, is highly prone to debris flow disasters due to its steep topography, loose surface materials, and frequent extreme rainfall. This study investigates the formation mechanisms and hazard dynamics of debris flows in this area, with particular attention to both natural factors and anthropogenic influences, such as sand mining. A key innovation of this research lies in integrating terrain modification effects into FLO-2D numerical simulations under varying rainfall scenarios. The results reveal that intense precipitation, steep slopes, and abundant loose materials primarily contribute to debris flow initiation. Simulations show that human-induced topographic changes significantly alter flow patterns and exacerbate risk. The study identifies a critical rainfall threshold of 130.86 mm and a 1-h triggering intensity of 50.86 mm. Hazard zoning based on flow velocity, deposition depth, and inundation range highlights the region’s vulnerability, especially around infrastructure and farmland. This work provides a scientific basis for early warning, engineering mitigation, and regional disaster prevention strategies.
- 6 June 2025
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 13, 1550360
Open AccessFormation mechanism and risk assessment of debris flow geological disasters in Lihong Road, Litong District, Wuzhong City, Ningxia
The Lihong Road area in Litong District, Wuzhong City, Ningxia, is highly prone to debris flow disasters due to its steep topography, loose surface materials, and frequent extreme rainfall. This study investigates the formation mechanisms and hazard dynamics of debris flows in this area, with particular attention to both natural factors and anthropogenic influences, such as sand mining. A key innovation of this research lies in integrating terrain modification effects into FLO-2D numerical simulations under varying rainfall scenarios. The results reveal that intense precipitation, steep slopes, and abundant loose materials primarily contribute to debris flow initiation. Simulations show that human-induced topographic changes significantly alter flow patterns and exacerbate risk. The study identifies a critical rainfall threshold of 130.86 mm and a 1-h triggering intensity of 50.86 mm. Hazard zoning based on flow velocity, deposition depth, and inundation range highlights the region’s vulnerability, especially around infrastructure and farmland. This work provides a scientific basis for early warning, engineering mitigation, and regional disaster prevention strategies.