SMSandipan Mukherjee

Sandipan Mukherjee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sandipan Mukherjee has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of surface treatments on the shear bond strength of veneering composite resin to CpTi, Ti6Al4V, and BioHPP framework materials: an in vitro study

    by Preeti Prabhu, Thilak Shetty, Mahesh Mundathaje, Srikant Natarajan, Umesh Pai, Shobha Rodrigues, Sharon Saldanha, Ravindra Kotian, Sandipan Mukherjee, Prashant Bajantri, et al.

    Background: Durable bonding between veneering composite resin and prosthetic framework materials is essential for the performance of veneered restorations. This study evaluated the effects of different surface-conditioning protocols on the shear bond strength (SBS) of veneering composite resin to commercially pure titanium (CpTi), Ti6Al4V alloy, and Bio High-Performance Polymer (BioHPP). Methods: Forty-five specimens of CpTi, Ti6Al4V, and BioHPP ( n = 15/material) were divided into three surface-conditioning subgroups ( n = 5): air abrasion with 110-µm Al₂O₃, 98% sulfuric acid etching, and sequential air abrasion followed by sulfuric acid etching. Following material-specific primer application and composite veneering, specimens were stored in distilled water for 24 h and subjected to 5,000 thermocycles. SBS was measured using a universal testing machine. Representative surface morphology was evaluated using scanning electron microscopy (SEM) and atomic force microscopy (AFM), and failure modes were assessed stereomicroscopically. SBS was analyzed using two-way ANOVA followed by Tukey’s HSD test (α = 0.05). Results: Framework material (F = 15.20, p < 0.001, partial η² = 0.458) and surface-conditioning protocol (F = 13.02, p < 0.001, partial η² = 0.420) significantly influenced SBS. A significant material × surface-conditioning interaction was also observed (F = 3.17, p = 0.025, partial η² = 0.261). Ti6Al4V subjected to combined air abrasion and sulfuric acid etching demonstrated the highest mean SBS (10.60 ± 4.09 MPa), whereas sulfuric acid-etched BioHPP exhibited the lowest (1.18 ± 1.00 MPa). Air abrasion and combined treatment produced significantly higher SBS than sulfuric acid etching alone (both p < 0.001), with no significant difference between air abrasion and combined treatment ( p = 0.886). All specimens exhibited adhesive failure. Conclusions: Framework material and surface-conditioning protocol significantly influenced SBS, with a material-dependent treatment response. Air abrasion, alone or followed by sulfuric acid etching, produced higher SBS than sulfuric acid etching alone. Because material-specific bonding systems were used, inter-material differences should be interpreted as reflecting the complete bonding protocols rather than the isolated effect of framework material alone. Further long-term laboratory and clinical studies are required before definitive clinical recommendations can be made.

  • Open Access

    Effectiveness of a structured rubric-based assessment in preclinical crown preparation training: a randomized controlled trial

    by Marie Fung Ying Chen, Mahesh Mundathaje, Srikant Natarajan, Prashant Bajantri, Sandipan Mukherjee

    Background: Crown preparation is a core but challenging skill for dental students, often assessed through subjective methods with limited reliability. Analytical rubrics provide a structured and transparent approach to teaching and evaluation. This study assessed the effectiveness of a rubric-based assessment system in preclinical crown preparation training. Methods: A randomized controlled trial was conducted with 90 fourth-year undergraduate dental students who met predefined eligibility criteria (mean age: 22 ± 1.2 years). Participants were randomly allocated in a 1:1 ratio using a computer-generated sequence to a control group ( n =  45) evaluated conventionally and a test group ( n =  45) evaluated using a structured rubric. Both groups prepared an all-ceramic crown on tooth #21 following standard instruction. The primary outcome was the total crown preparation score. Assessments were performed independently by calibrated examiners at baseline and post-training; student blinding was not feasible. No adverse events were reported. Independent and paired t-tests with Bonferroni correction were applied, effect sizes calculated, and post hoc power analysis performed using a 95% confidence interval. Student perceptions were collected using a six-item Likert-scale questionnaire. Results: Baseline comparisons had no significant differences ( p =  1.0). At the end of training, the primary outcome show, test group demonstrated significantly higher scores across all parameters (all p < 0.001). Mean total score was 30.53 ± 4.99 in the test group versus 10.56 ± 4.34 in the control group ( p < 0.001; Cohen’s d = 4.21). Both groups improved significantly, with greater gains in the test group (22.91 ± 6.42 vs 2.93 ± 2.72). Post hoc power exceeded 0.99 for all outcomes. Student feedback was highly positive, with 95% affirming improved objectivity, self-reflection, and clarity of evaluation criteria. Conclusions: The use of an analytical rubric was associated with higher crown preparation assessment scores and positive student perceptions regarding clarity and objectivity of evaluation. These findings suggest that rubric-based assessment may support structured performance evaluation and learner understanding in preclinical prosthodontic training. Trial registration: Not registered. This study evaluated an educational assessment intervention in a preclinical academic setting and did not involve patients or health-related clinical interventions as defined under ICMJE criteria.

  • Open Access

    Seroprotection following hepatitis B vaccination in health care workers at a dental teaching hospital in south India

    by Shobha Rodrigues, Jyoti Suvarna, Shivani Suvarna, Srikant Natarajan, Sandipan Mukherjee, Sowmya Narayan, Shivani Shetty

    Objective: To evaluate the serological response to hepatitis B vaccination among health care workers (HCWs) in a dental teaching institution in South India and to assess factors influencing seroprotection. Methods: This observational cohort study included 217 HCWs from a dental teaching hospital. Participants received the recombinant hepatitis B vaccine according to the standard three-dose schedule (0, 1, and 6 months). Anti-hepatitis B surface antibody (anti-HBs) titers were measured two months after completion of vaccination using enzyme-linked immunosorbent assay. Seroprotection was defined as anti-HBs ≥10 mIU/mL. Associations between seroprotection and demographic variables, including age, gender, ethnicity, and number of vaccine doses, were analyzed using chi-square and independent t-tests. Results: Among the participants, 203 (93.5%) completed the three-dose vaccination schedule. The overall seroprotection rate was 89.2% in the three-dose group and 85.7% in the two-dose group, with no statistically significant difference (p=0.691). Younger participants (≤30 years) demonstrated significantly higher seroprotection rates (p=0.034) and higher mean anti-HBs titers (p=0.049). No significant differences were observed between males and females (p=0.501). Seroprotection varied significantly across ethnic groups, with Malaysian participants showing the highest response rates (p=0.05). Conclusion: Although hepatitis B vaccination provides substantial protection among HCWs, a proportion of individuals remain non-seroprotected despite completing the recommended vaccination schedule. Age and ethnicity significantly influence vaccine response. These findings highlight the importance of post-vaccination antibody monitoring and the need for targeted revaccination strategies in high-risk populations.

  • Open Access

    Synergistic role of oral and maxillofacial surgery and prosthodontics in implant-based rehabilitation: a scoping review protocol

    by Mahesh Mundathaje, Dharnappa Poojary, Jefferson Prince, Sandipan Mukherjee, Naresh Shetty

    Objective: This protocol for scoping review aims to systematically map existing evidence on collaborative approaches between Oral and Maxillofacial Surgery (OMFS) and Prosthodontics in implant therapy, exploring their implementation, influential clinical domains, current methodologies, technologies, and identifying research gaps. Introduction: Dental implant therapy has revolutionized patient care, but optimal success, especially in complex cases, hinges on precise surgical and prosthetic foresight. The synergy between OMFS and Prosthodontists is crucial. Modern dentistry embraces a prosthetically driven, integrated paradigm, greatly streamlined by digital workflows. Despite advancements, literature remains fragmented, lacking a comprehensive synthesis of collaborative models. This protocol for review seeks to bridge that gap. Inclusion criteria: Studies on adult (≥18 years) edentulous or partially edentulous patients undergoing implant-based rehabilitation, focusing on OMFS and Prosthodontics interdisciplinary collaboration in planning, surgery, and prosthetics, will be considered. All clinical settings, regions, and study designs (quantitative, qualitative, mixed methods, reviews, text/opinion papers) are included. Studies solely on a single discipline or maxillofacial prosthetics unrelated to tooth replacement via implants will be excluded. Methods: This protocol for scoping review explains methodology that will follow PRISMA-ScR guidelines. A comprehensive search will be conducted across PubMed/MEDLINE, Scopus, Web of Science, Embase, and Cochrane Library. Two independent reviewers will screen titles, abstracts, and full texts. Data extraction will use a standardized charting form, followed by descriptive and thematic analysis, presented narratively with tables/figures. Review registration: Open Science Framework https://doi.org/10.17605/OSF.IO/USZ9V


  • Open Access

    Comparison of Bone Density and Crestal Bone Loss Between Immediately Temporized and Submerged Implants in the Posterior Mandible: A Radiovisiographic Study

    by Rodrigues Shobha, Prashant Bajantri, Gautami Pal, Sanchit Bansal, Arvind R, Srikant N, Mahesh M, Shetty Thilak, Pai Umesh, Saldanha Sharon, et al.

    Purpose: This study aimed to evaluate and compare alveolar bone density and crestal bone loss (CBL) around immediately temporized implants (ITIs) and conventionally placed submerged implants (CIs) in the posterior mandible using radiovisiography (RVG). Methods: In this prospective, randomized, split‐mouth clinical study, nine patients with bilateral posterior mandibular edentulism were enrolled. A bone‐level implant was placed bilaterally in each patient. One side received an immediate temporized, while the contralateral side received a CI. Standardized RVGs were obtained at baseline, 3 months, and 6 months. Alveolar bone density and CBL were measured using ImageJ software. Data were analyzed using paired t ‐tests with significance set at p < 0.05. Results: No statistically significant differences in alveolar bone density or CBL were observed between the ITI and conventional groups at any follow‐up interval. Mean alveolar bone densities were higher in the ITI group at all intervals (baseline: 136.22 ± 36.23, 3 months: 137.03 ± 34, 6 months: 136.28 ± 34.59) compared to the conventional group (baseline: 136.56 ± 24.26, 3 months: 126.53 ± 34.93, 6 months: 119.95 ± 43.35). At 3 months, the ITI group exhibited greater CBL (0.22 ± 0.63 mm) than the conventional group (0.15 ± 0.83 mm). However, at 6 months, the ITI implants exhibited less CBL (− 0.07 ± 0.47 mm) compared to the conventional implants (0.19 ± 0.78 mm). Conclusion: Immediate temporization under nonfunctional loading did not negatively affect peri‐implant bone compared to conventional submerged healing. These results support its clinical use in appropriately selected cases.


  • Open Access

    An In Vitro Comparison of the Influence of Air Abrasion, G‐Multiprimer, and Salivary Contamination on the Shear Bond Strength and Surface Characteristics of Opaque Zirconia Ceramics

    by Alisha Ono Idris, Shobha J. Rodrigues, Puneeth Hegde, Thilak Shetty, Umesh Y. Pai, Sharon Saldanha, Mahesh M., Sandipan Mukherjee, Ann Sales, Vignesh Kamath, et al.

    Aim: To evaluate the effect of various surface treatments and saliva contamination on the shear bond strength (SBS) and surface characteristics of yttria‐stabilized tetragonal zirconia ceramics (YTZP) bonded with self‐adhesive resin cement (SAC). Materials and Methods: Opaque Y‐ZTP ceramics were divided into four groups based on specific surface treatment: control (C), air abrasion (AA), G‐multiprimer (G), and AA + G (AG). Surface characteristics of the treated specimens, roughness and, elemental analysis were done using scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive analysis of X‐rays (EDAX), respectively. These specimens were further divided into saliva (S) and non‐S (NS) contamination groups. Following the surface treatment, 10 resin cement cylinders were affixed onto the zirconia discs within every group. Micro‐SBS (µSBS) was calculated, and fracture surfaces were assessed. Statistical analysis was done using one‐way analysis of variance (ANOVA) and the post hoc Tukey test. Results: The µSBS values for the groups were as follows: CS (0.86 ± 0.7), CNS (3.13 ± 2.7), AS (3.14 ± 2.6), ANS (2.96 ± 1.2), GS (5.92 ± 2.2), GNS (5.94 ± 2.2), AGS (4.97 ± 0.9), and AGNS (8.06 ± 1.4). A one‐way ANOVA showed that all the groups had a statistically significant difference in the SBS except the AS, AGS, CNS, ANS, as well as the GNS and AGNS. AFM results revealed the mean roughness value of AA is highest, followed by G‐multiprimer, AG, and least in control. This difference is statistically significant with p ‐value of Conclusion: Airborne particle abrasion and the application of G‐multiprimer provide the best results in a moisture‐free environment.