Hongde Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hongde Dai has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Shaowu Dai
Naval Aviation University,Shandong,China
3 shared publications- Hongxu Ma
College of Intelligence Science and Technology, National University of Defense Technology, Changsha 410073, China
2 shared publications - Qiangqiang Chen
Naval Research Institution, Shanghai 200436, China
2 shared publications Aili Liu
College of Mechatronic Engineering and Automation, National University of Defence Technology, Changsha, 410073, China
1 shared publication- Baidong Zheng
School of Basic Sciences for Aviation, Naval Aviation University, YanTai, China
1 shared publication - Guangbin Wu
Automatic Control Department of Naval Aeronautical Engineering Academy, Yantai 2640011, P. R. China
1 shared publication
Latest Publications
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (16) , 31086-31096
Robust Initialization of Underwater Monocular Visual–Inertial–Pressure Odometry
In the underwater environment, image degradation and insufficient IMU excitation make the initialization of visual-inertial odometry a serious challenge. The traditional method improves the performance of initialization by fusing depth information, but does not consider the camera-depth misalignment effect, and the estimation accuracy of gyroscope bias is affected by inaccurate visual Structure-from-Motion (SfM). To address these issues, this article proposes a robust initialization method by introducing the robust cost function and depth information to provide a high-quality initial state for Underwater Monocular Visual-Inertial-Pressure Odometry (UM-VIPO). Our method begins with a vision-only structure. The Truncated Least Squares (TLS) algorithm is used to suppress outliers in feature matching, thereby significantly improving the accuracy and robustness of visual SfM. In addition, the Graduated Non-Convexity (GNC) algorithm is used to solve the non-convex optimization problem induced by the TLS, effectively avoiding convergence to local minima. During visual-depth alignment, depth measurements are introduced to recover the metric scale of the visual poses. By aligning the visual poses and depth measurements with the world coordinate system, the camera-depth misalignment effect is effectively mitigated. In the visual-inertial alignment phase, the gyroscope bias is estimated from the vision-only structure, while the IMU pre-integration is leveraged to calculate the initial velocity in the world coordinate system. Then, all initialized parameters are used to execute a local Bundle Adjustment (BA). Finally, the proposed method is validated on the AQUALOC dataset, demonstrating its effectiveness and superiority.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (16) , 31086-31096
Robust Initialization of Underwater Monocular Visual–Inertial–Pressure Odometry
In the underwater environment, image degradation and insufficient IMU excitation make the initialization of visual-inertial odometry a serious challenge. The traditional method improves the performance of initialization by fusing depth information, but does not consider the camera-depth misalignment effect, and the estimation accuracy of gyroscope bias is affected by inaccurate visual Structure-from-Motion (SfM). To address these issues, this article proposes a robust initialization method by introducing the robust cost function and depth information to provide a high-quality initial state for Underwater Monocular Visual-Inertial-Pressure Odometry (UM-VIPO). Our method begins with a vision-only structure. The Truncated Least Squares (TLS) algorithm is used to suppress outliers in feature matching, thereby significantly improving the accuracy and robustness of visual SfM. In addition, the Graduated Non-Convexity (GNC) algorithm is used to solve the non-convex optimization problem induced by the TLS, effectively avoiding convergence to local minima. During visual-depth alignment, depth measurements are introduced to recover the metric scale of the visual poses. By aligning the visual poses and depth measurements with the world coordinate system, the camera-depth misalignment effect is effectively mitigated. In the visual-inertial alignment phase, the gyroscope bias is estimated from the vision-only structure, while the IMU pre-integration is leveraged to calculate the initial velocity in the world coordinate system. Then, all initialized parameters are used to execute a local Bundle Adjustment (BA). Finally, the proposed method is validated on the AQUALOC dataset, demonstrating its effectiveness and superiority.
- 24 June 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 248
Arc fault detection in aircraft AC power systems using coefficient of variation
- 24 June 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 248
Arc fault detection in aircraft AC power systems using coefficient of variation
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4609-4613
Integrated Fault Estimation and Fault-tolerant Control for Discrete Lipschitz Nonlinear Systems
A method of integrated fault estimation(FE) and fault-tolerant control(FTC) for discrete nonlinear systems with actuator faults is proposed. Firstly, the observer is designed to get the error equation and the fault-tolerant controller is designed to obtain closed-loop control system. Then consider the coupling of them, an augmented system of system error and state are established. Secondly, the augmentation system can be design by $H_{\infty}$ control to realize integrated FE/FTC. Finally, the proposed method is applied to by the flight control system.- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4609-4613
Integrated Fault Estimation and Fault-tolerant Control for Discrete Lipschitz Nonlinear Systems
A method of integrated fault estimation(FE) and fault-tolerant control(FTC) for discrete nonlinear systems with actuator faults is proposed. Firstly, the observer is designed to get the error equation and the fault-tolerant controller is designed to obtain closed-loop control system. Then consider the coupling of them, an augmented system of system error and state are established. Secondly, the augmentation system can be design by $H_{\infty}$ control to realize integrated FE/FTC. Finally, the proposed method is applied to by the flight control system.- Open Access
- 1 July 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1267 (1) , 012024
De-Noising Algorithm for Flight Data Recording System Based on Modified Ensemble Empirical Mode Decomposition
The Flight Data Recording System (FDRS) records a lot of parameters of the aircraft during flight, which can be used for the test-flying, training mission of aircraft and so on. Effected by the working environment, information interference and its non-stability, the outliers and noise often exists in the FDRS data. These noises and outliers have a great impact on the use of FDRS. The aim of this paper is to remove outliers and de-noising of navigation data in FDRS. The causes of outliers and noise in FDRS data are analyzed firstly, with a reference suggestion proposed. Then the Letts criterion is used to remove outliers and the Modified Ensemble Empirical Mode Decomposition (MEEMD) is applied to achieve denoising for FDRS. Results demonstrate that outliers are removed and the navigation data are de-noised effectively.
- 1 July 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1267 (1) , 012024
Open AccessDe-Noising Algorithm for Flight Data Recording System Based on Modified Ensemble Empirical Mode Decomposition
The Flight Data Recording System (FDRS) records a lot of parameters of the aircraft during flight, which can be used for the test-flying, training mission of aircraft and so on. Effected by the working environment, information interference and its non-stability, the outliers and noise often exists in the FDRS data. These noises and outliers have a great impact on the use of FDRS. The aim of this paper is to remove outliers and de-noising of navigation data in FDRS. The causes of outliers and noise in FDRS data are analyzed firstly, with a reference suggestion proposed. Then the Letts criterion is used to remove outliers and the Modified Ensemble Empirical Mode Decomposition (MEEMD) is applied to achieve denoising for FDRS. Results demonstrate that outliers are removed and the navigation data are de-noised effectively.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2084-2088
Prediction for Gyros output based on EMD-SVR
To solve the problem of prediction for Gyros real-time output, improve the prediction accuracy of Gyros output, a new prediction algorithm based on Empirical Mode Decomposition (EMD) and Support Vector Regression (SVR) is put forward in this paper. Due to the non-linearity and non-stability of Gyros output, the conventional prediction methods are not accurate, so the Empirical Mode Decomposition were chosen to decompose the Gyros output to several Intrinsic Mode Functions (IMF) and a residual series. For these IMFs and residual series, use Support Vector Regression to build the prediction model. The prediction results of IMFs and residual series were merged to obtain the Gyros output. Result show that this prediction algorithm is effective compared with Support Vector Regression, which verified the precision of the method.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2084-2088
Prediction for Gyros output based on EMD-SVR
To solve the problem of prediction for Gyros real-time output, improve the prediction accuracy of Gyros output, a new prediction algorithm based on Empirical Mode Decomposition (EMD) and Support Vector Regression (SVR) is put forward in this paper. Due to the non-linearity and non-stability of Gyros output, the conventional prediction methods are not accurate, so the Empirical Mode Decomposition were chosen to decompose the Gyros output to several Intrinsic Mode Functions (IMF) and a residual series. For these IMFs and residual series, use Support Vector Regression to build the prediction model. The prediction results of IMFs and residual series were merged to obtain the Gyros output. Result show that this prediction algorithm is effective compared with Support Vector Regression, which verified the precision of the method.
- 16 September 2013
- Published by China Science Publishing & Media Ltd. in JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING
- Vol. 30 (3) , 275-279
Research on the SVM based modeling method for detection equipment about hydraulic pressure of aircraft
- 16 September 2013
- Published by China Science Publishing & Media Ltd. in JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING
- Vol. 30 (3) , 275-279
Research on the SVM based modeling method for detection equipment about hydraulic pressure of aircraft
- 1 December 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21601283,p. 4506-4510
Design of simulation system about transfer alignment of SINS for shipborne equipment
A simulation system about transfer alignment of strapdown inertial navigation system (SINS) on moving base is designed, aim at the problems of big cost, high risk and worse repetition about the validate of transfer alignment algorithm and evaluation of the accuracy about SINS of shipborne equipment. The system consists of motion model, where the motion manner is set; the ship motion simulation is used to give the ship's motion under the motion model; then the motion is sensed by master and slave IMU respectively, which contains gyros and accelerometers, here the Flexure of the body and lever arm effect are simulated and sensed by the slave IMU only; then SINS algorithm is utilized to compute the navigation message respectively, such as velocity, attitude and position of the body, then by matching the message from master SINS and slave SINS to obtain the measurement message of transfer alignment. The validate and evaluation of many transfer alignment algorithm and transfer alignment filtering can be done based on this system, obtained the advantage of better expandability and high accuracy. The rapid transfer alignment about “velocity plus attitude” is simulated based on this system; validate the exactness and the availability of the presented method.
- 1 December 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21601283,p. 4506-4510
Design of simulation system about transfer alignment of SINS for shipborne equipment
A simulation system about transfer alignment of strapdown inertial navigation system (SINS) on moving base is designed, aim at the problems of big cost, high risk and worse repetition about the validate of transfer alignment algorithm and evaluation of the accuracy about SINS of shipborne equipment. The system consists of motion model, where the motion manner is set; the ship motion simulation is used to give the ship's motion under the motion model; then the motion is sensed by master and slave IMU respectively, which contains gyros and accelerometers, here the Flexure of the body and lever arm effect are simulated and sensed by the slave IMU only; then SINS algorithm is utilized to compute the navigation message respectively, such as velocity, attitude and position of the body, then by matching the message from master SINS and slave SINS to obtain the measurement message of transfer alignment. The validate and evaluation of many transfer alignment algorithm and transfer alignment filtering can be done based on this system, obtained the advantage of better expandability and high accuracy. The rapid transfer alignment about “velocity plus attitude” is simulated based on this system; validate the exactness and the availability of the presented method.
- 1 June 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 93-96
Estimation method for ship deformation under wave loads
Accurate Ship deformation message is needed during ship launching weapons' transfer alignment. This paper present an estimation method for large ship deformation based on finite element analysis and strip method. Each strip's hydrodynamic pressure on ship hull surface is calculated first. According to strip method each strip is connected to a finite element model node, so strips and nodes have the same direction vector, and through direction vector the hydrodynamic pressure can be translated into wave loads in three directions. Ship deformations can be estimated while wave loads are given to finite element model nodes.
- 1 June 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 93-96
Estimation method for ship deformation under wave loads
Accurate Ship deformation message is needed during ship launching weapons' transfer alignment. This paper present an estimation method for large ship deformation based on finite element analysis and strip method. Each strip's hydrodynamic pressure on ship hull surface is calculated first. According to strip method each strip is connected to a finite element model node, so strips and nodes have the same direction vector, and through direction vector the hydrodynamic pressure can be translated into wave loads in three directions. Ship deformations can be estimated while wave loads are given to finite element model nodes.
- 1 June 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 39, 523-526
Distributed uniform attitude reference of warship based on Inertial Measurement
A new method for building the uniform attitude reference of warship was presented in this paper. A certain number of IMUs (Inertial Measurement Unit: laser gyros and accelerometers) have been installed on various points of the warship to build a distributed inertial network together with the main inertial navigation system, which is optimized by genetic algorithm, and the fitness function of the genetic algorithm is based on the Modal Assurance Criterion (MAC) matrix of the ship. According to the output of the IMUs, the accurate deformation message of the warship can be obtained in time by the central integration computer with inertial matching method, and then the distributed inertial measurement based uniform attitude reference of warship will be built by getting the attitude massage of any battle station on the warship using information fusion algorithm. Simulation environment is also designed to validate the efficiency and veracity of the method presented.
- 1 June 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 39, 523-526
Distributed uniform attitude reference of warship based on Inertial Measurement
A new method for building the uniform attitude reference of warship was presented in this paper. A certain number of IMUs (Inertial Measurement Unit: laser gyros and accelerometers) have been installed on various points of the warship to build a distributed inertial network together with the main inertial navigation system, which is optimized by genetic algorithm, and the fitness function of the genetic algorithm is based on the Modal Assurance Criterion (MAC) matrix of the ship. According to the output of the IMUs, the accurate deformation message of the warship can be obtained in time by the central integration computer with inertial matching method, and then the distributed inertial measurement based uniform attitude reference of warship will be built by getting the attitude massage of any battle station on the warship using information fusion algorithm. Simulation environment is also designed to validate the efficiency and veracity of the method presented.