Misho Matsankov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Misho Matsankov has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Atanas Radulov
Department of Electrical Engineering, Faculty of Electronics and Automation, Technical University of Sofia Branch Plovdiv, 4000 Plovdiv, Bulgaria
3 shared publications - Kliment Georgiev
Department of Mechanical Engineering and Instrumentation, Faculty of Mechanical Engineering and Instrumentation, Technical University of Sofia Branch Plovdiv, 4000 Plovdiv, Bulgaria
2 shared publications - Mario Dechev
Department of Electrical Engineering, Faculty of Electronics and Automation, Technical University of Sofia Branch Plovdiv, 4000 Plovdiv, Bulgaria
2 shared publications Mario Dechev
Department:Departmant of Electrical Engineering, Technical University of Sofia, branch Plovdiv, Plovdiv, Bulgaria
1 shared publication- Nikolay Paunkov
Department of Electrical Engineering, Faculty of Electronics and Automation, Technical University of Sofia Plovdiv Branch, 4000 Plovdiv, Bulgaria
1 shared publication Teodor Demirev
Department: Mechanical and Instrument Engineering, Technical University of Sofia, branch Plovdiv, Plovdiv, Bulgaria
1 shared publication
Latest Publications
- Open Access
- 17 September 2026
- Published by Green Future Technologies SIA in Proceedings of the International Conference on Secure Systems Design and Technology Development
- Vol. 2, 79-84
INVESTIGATION OF DIFFERENCES IN LIGHT TRANSMISSION IN TRANSLUCENT MATERIALS USED IN ADDITIVE MANUFACTURING
The present study investigates the impact of filament colour and specimen thickness on overall light transmittance in fused deposition modelling printed transparent PETG. Flat specimens were prepared in six transparent colour variants (transparent, blue, neon green, orange, red, and yellow) and in thicknesses ranging from 1.0 to 3.5 mm. The measurements were conducted within a custom-built enclosed laboratory stand, thereby ensuring the elimination of ambient light interference. In order to verify the result stability, the transmitted light was measured at four nominal source power levels (200, 2600, 6600, and 10600 lx) and evaluated as normalized transmittance. For all of the materials that were analysed, there was a decrease in transmittance as specimen thickness increased. Transparent PETG demonstrated the highest transmittance from 1.0 to 2.5 mm, while yellow PETG exhibited the highest values at 3.0 and 3.5 mm. In the present study, the lowest transmittance was exhibited by blue PETG at all thickness levels, with the approach of complete attenuation being observed in thicker specimens. Neon green exhibited an intermediate level of transmission, while orange and red demonstrated comparatively reduced transmission following a notable decline between 1.0 and 1.5 mm. The normalized values were found to be consistent across the higher source power settings, thereby supporting the reliability of the measured attenuation trends. The findings of this study demonstrate that transparent tinted PETG filaments cannot be regarded as optically equivalent, and that specimen thickness is a significant factor in determining attenuation in printed components.
- 17 September 2026
- Published by Green Future Technologies SIA in Proceedings of the International Conference on Secure Systems Design and Technology Development
- Vol. 2, 79-84
Open AccessINVESTIGATION OF DIFFERENCES IN LIGHT TRANSMISSION IN TRANSLUCENT MATERIALS USED IN ADDITIVE MANUFACTURING
The present study investigates the impact of filament colour and specimen thickness on overall light transmittance in fused deposition modelling printed transparent PETG. Flat specimens were prepared in six transparent colour variants (transparent, blue, neon green, orange, red, and yellow) and in thicknesses ranging from 1.0 to 3.5 mm. The measurements were conducted within a custom-built enclosed laboratory stand, thereby ensuring the elimination of ambient light interference. In order to verify the result stability, the transmitted light was measured at four nominal source power levels (200, 2600, 6600, and 10600 lx) and evaluated as normalized transmittance. For all of the materials that were analysed, there was a decrease in transmittance as specimen thickness increased. Transparent PETG demonstrated the highest transmittance from 1.0 to 2.5 mm, while yellow PETG exhibited the highest values at 3.0 and 3.5 mm. In the present study, the lowest transmittance was exhibited by blue PETG at all thickness levels, with the approach of complete attenuation being observed in thicker specimens. Neon green exhibited an intermediate level of transmission, while orange and red demonstrated comparatively reduced transmission following a notable decline between 1.0 and 1.5 mm. The normalized values were found to be consistent across the higher source power settings, thereby supporting the reliability of the measured attenuation trends. The findings of this study demonstrate that transparent tinted PETG filaments cannot be regarded as optically equivalent, and that specimen thickness is a significant factor in determining attenuation in printed components.
- Open Access
- 17 September 2026
- Published by Green Future Technologies SIA in Proceedings of the International Conference on Secure Systems Design and Technology Development
- Vol. 3, 387-391
ANALYSIS OF MODELS FOR ESTIMATING ELECTRICITY LOSSES IN DISTRIBUTION NETWORKS
The design of renewable energy sources and their connection to the electrical grids at different voltage levels leads to changes in the mode parameters of the grid. Electrical energy losses are of both technical and economic interest. The report examines the most commonly used models for estimating electricity losses in low-voltage distribution networks, depending on the available data under operational conditions. It is proposed to use an improved model with increased accuracy, in the application of which the seasonality coefficient is taken into account.
- 17 September 2026
- Published by Green Future Technologies SIA in Proceedings of the International Conference on Secure Systems Design and Technology Development
- Vol. 3, 387-391
Open AccessANALYSIS OF MODELS FOR ESTIMATING ELECTRICITY LOSSES IN DISTRIBUTION NETWORKS
The design of renewable energy sources and their connection to the electrical grids at different voltage levels leads to changes in the mode parameters of the grid. Electrical energy losses are of both technical and economic interest. The report examines the most commonly used models for estimating electricity losses in low-voltage distribution networks, depending on the available data under operational conditions. It is proposed to use an improved model with increased accuracy, in the application of which the seasonality coefficient is taken into account.
- Open Access
- 10 August 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 150 (1) , 127
Assessment of Accuracy in Measuring Distance with Ultrasound
Many measurements are performed using ultrasound in technology. The main advantage of this measurement method is the lack of contact between the measuring element and the object being measured. An application based on the Arduino platform is presented, created for measuring distances with ultrasound. The assessment of the measurement accuracy and the sensitivity of the measuring elements to different types of surfaces will be presented. The compilation of measurement systems and the mathematical processing of the results obtained from repeated measurements will assist students in the learning process in various engineering disciplines related to the measurement of non-electrical quantities and the creation of various systems for automatic control of measurement systems.
- 10 August 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 150 (1) , 127
Open AccessAssessment of Accuracy in Measuring Distance with Ultrasound
Many measurements are performed using ultrasound in technology. The main advantage of this measurement method is the lack of contact between the measuring element and the object being measured. An application based on the Arduino platform is presented, created for measuring distances with ultrasound. The assessment of the measurement accuracy and the sensitivity of the measuring elements to different types of surfaces will be presented. The compilation of measurement systems and the mathematical processing of the results obtained from repeated measurements will assist students in the learning process in various engineering disciplines related to the measurement of non-electrical quantities and the creation of various systems for automatic control of measurement systems.
- Open Access
- 5 August 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 150 (1) , 116
Investigation of Overall Light Transmittance of PETG Material
The article presents a study of the overall brightness of semi-transparent materials used in additive manufacturing. Components with varying thicknesses and diverse types of finished surfaces were manufactured and evaluated under various lighting conditions. The test components were fabricated from a transparent PETG (polyethylene terephthalate) material. The printing parameters were selected based on a series of experiments conducted on this type of material. The measurements were conducted on a specially designed and manufactured stand for measuring overall light transmittance. The classical method for evaluating the results according to the normal distribution law was applied. The findings of the studies demonstrate that transmittance is predominantly contingent on the thickness of the component, as opposed to the illuminance or the nature of the surface. The discrepancy in transmittance between thicknesses of 1 and 1.5 mm for all illuminance levels is approximately 12%. As the thickness increases, the discrepancy in transmittance decreases, reaching approximately 1.5% for samples with thicknesses ranging from 2 to 3.5 mm. The light intensity exhibited a negligible effect on transmittance, with an approximate measurement of 1.5%.
- 5 August 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 150 (1) , 116
Open AccessInvestigation of Overall Light Transmittance of PETG Material
The article presents a study of the overall brightness of semi-transparent materials used in additive manufacturing. Components with varying thicknesses and diverse types of finished surfaces were manufactured and evaluated under various lighting conditions. The test components were fabricated from a transparent PETG (polyethylene terephthalate) material. The printing parameters were selected based on a series of experiments conducted on this type of material. The measurements were conducted on a specially designed and manufactured stand for measuring overall light transmittance. The classical method for evaluating the results according to the normal distribution law was applied. The findings of the studies demonstrate that transmittance is predominantly contingent on the thickness of the component, as opposed to the illuminance or the nature of the surface. The discrepancy in transmittance between thicknesses of 1 and 1.5 mm for all illuminance levels is approximately 12%. As the thickness increases, the discrepancy in transmittance decreases, reaching approximately 1.5% for samples with thicknesses ranging from 2 to 3.5 mm. The light intensity exhibited a negligible effect on transmittance, with an approximate measurement of 1.5%.
- Open Access
- 1 July 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 100 (1) , 8
Investigation of the Efficiency of a Peltier Element
This paper presents the implementation of a modern approach for automatic measurement, data acquisition, and processing using custom-developed software based on the ARDUINO version: 2.3.6 platform. State-of-the-art sensing elements are employed for enhanced precision and reliability. The obtained results are graphically visualized for comprehensive analysis. The ARDUINO microcontroller and its associated open-source programming environment are primarily designed for general-purpose users rather than specialized industrial applications. The study focuses on the experimental investigation of the characteristics of a Peltier element. The interdependence between current, voltage, internal resistance, and temperature differential is examined in detail. The findings concerning efficiency analysis are intended to support students across various engineering disciplines during their educational process.
- 1 July 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 100 (1) , 8
Open AccessInvestigation of the Efficiency of a Peltier Element
This paper presents the implementation of a modern approach for automatic measurement, data acquisition, and processing using custom-developed software based on the ARDUINO version: 2.3.6 platform. State-of-the-art sensing elements are employed for enhanced precision and reliability. The obtained results are graphically visualized for comprehensive analysis. The ARDUINO microcontroller and its associated open-source programming environment are primarily designed for general-purpose users rather than specialized industrial applications. The study focuses on the experimental investigation of the characteristics of a Peltier element. The interdependence between current, voltage, internal resistance, and temperature differential is examined in detail. The findings concerning efficiency analysis are intended to support students across various engineering disciplines during their educational process.