Serhii Bodnar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Serhii Bodnar has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Marharyta Dubnytska
Taras Shevchenko National University of Kyiv, Kyiv
2 shared publications - Oleksandr Honcharenko2 shared publications
- Liliia Hebryn-Baidy
Scott Polar Research Institute, University of Cambridge, Cambridge CB2 1ER, UK
1 shared publication - Liudmyla Datsenko
Taras Shevchenko National University of Kyiv, Kyiv
1 shared publication - Mykola A. Molochko
Taras Shevchenko National University of Kyiv, Kyiv, Ukraine
1 shared publication - Oleksii Mikhno
Taras Shevchenko National University of Kyiv
1 shared publication
Latest Publications
- 1 May 2026
- Published by Springer Nature
- p. 699-709
Method for Studying the Effect of Barcode Staff Rotation on Digital Levelling Accuracy
- 1 May 2026
- Published by Springer Nature
- p. 699-709
Method for Studying the Effect of Barcode Staff Rotation on Digital Levelling Accuracy
- Open Access
- 26 March 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 17,p. 355-370
DETERMINATION OF THE WORKING ZONE FOR BARCODE STAFF ROTATION ANGLES BASED ON ROBUST ESTIMATION OF REPEATED MEASUREMENTS
This paper presents a repeatability-driven methodology for determining the working range of rotation angles of a barcode leveling staff about the vertical axis in digital leveling, addressing practical conditions where the staff plane cannot be aligned orthogonally to the line of sight due to restricted space (construction sites, narrow corridors, engineering niches, and deformation monitoring setups). Unlike purely geometric interpretations of a “limiting angle,” the proposed approach defines admissibility through measurement quality, i.e., the stability of repeated readings at each rotation angle. The experimental study was carried out under laboratory conditions using a Sokkia SDL30 digital level at a fixed distance of D = 2 m across the full rotation interval barcode rail −78°…+78°. For each angle θ, n = 20 repeated observations were collected using the S-E scheme, where the digital level readings were taken at the start and end edges of the same stripe. Based on the repeated measurements, the mean difference Ā(0), the dispersion estimate sA(θ), and the standard error of the mean uA(θ) were computed to quantify both the systematic trend and repeatability of the descriptor. To ensure consistent inter-angle comparison and suppress configuration-specific offsets, the results were compensated relative to the reference position θ=0° and normalized by the stripe width W=49,8 mm, producing the dimensionless descriptor Anorm(θ). A robust selection threshold is introduced as u95=P95(uA(θ)), which separates stable and unstable angles and enables forming the working set QW={θ : uA(θ) ≤ u95}. The effect of staff rotation on descriptor behavior and repeatability was statistically validated using a set of complementary tests, including ANOVA, regression modeling, permutation testing, and correlation measures, confirming that θ significantly influences digital stripe reading results. The proposed framework provides actionable recommendations for selecting admissible staff rotation angles and establishing an operational “working zone” QW, thereby improving the reliability of digital leveling when orthogonal staff alignment is impossible and consistent accuracy is required in constrained measurement geometries.
- 26 March 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 17,p. 355-370
Open AccessDETERMINATION OF THE WORKING ZONE FOR BARCODE STAFF ROTATION ANGLES BASED ON ROBUST ESTIMATION OF REPEATED MEASUREMENTS
This paper presents a repeatability-driven methodology for determining the working range of rotation angles of a barcode leveling staff about the vertical axis in digital leveling, addressing practical conditions where the staff plane cannot be aligned orthogonally to the line of sight due to restricted space (construction sites, narrow corridors, engineering niches, and deformation monitoring setups). Unlike purely geometric interpretations of a “limiting angle,” the proposed approach defines admissibility through measurement quality, i.e., the stability of repeated readings at each rotation angle. The experimental study was carried out under laboratory conditions using a Sokkia SDL30 digital level at a fixed distance of D = 2 m across the full rotation interval barcode rail −78°…+78°. For each angle θ, n = 20 repeated observations were collected using the S-E scheme, where the digital level readings were taken at the start and end edges of the same stripe. Based on the repeated measurements, the mean difference Ā(0), the dispersion estimate sA(θ), and the standard error of the mean uA(θ) were computed to quantify both the systematic trend and repeatability of the descriptor. To ensure consistent inter-angle comparison and suppress configuration-specific offsets, the results were compensated relative to the reference position θ=0° and normalized by the stripe width W=49,8 mm, producing the dimensionless descriptor Anorm(θ). A robust selection threshold is introduced as u95=P95(uA(θ)), which separates stable and unstable angles and enables forming the working set QW={θ : uA(θ) ≤ u95}. The effect of staff rotation on descriptor behavior and repeatability was statistically validated using a set of complementary tests, including ANOVA, regression modeling, permutation testing, and correlation measures, confirming that θ significantly influences digital stripe reading results. The proposed framework provides actionable recommendations for selecting admissible staff rotation angles and establishing an operational “working zone” QW, thereby improving the reliability of digital leveling when orthogonal staff alignment is impossible and consistent accuracy is required in constrained measurement geometries.
- Open Access
- 26 February 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 16,p. 403-418
DETERMINATION OF THE WORKING ZONE OF BARCODE RAIL ROTATION ANGLES BASED ON ROBUST ESTIMATION OF REPEATED MEASUREMENTS
This paper presents a repeatability-driven methodology for determining the working range of rotation angles of a barcode leveling staff about the vertical axis in digital leveling, addressing practical conditions where the staff plane cannot be aligned orthogonally to the line of sight due to restricted space (construction sites, narrow corridors, engineering niches, and deformation monitoring setups). Unlike purely geometric interpretations of a “limiting angle,” the proposed approach defines admissibility through measurement quality, i.e., the stability of repeated readings at each rotation angle. The experimental study was carried out under laboratory conditions using a Sokkia SDL30 digital level at a fixed distance of D = 2 m across the full rotation interval barcode rail −78°…+78°. For each angle θ, n = 20 repeated observations were collected using the S-E scheme, where the digital level readings were taken at the start and end edges of the same stripe. Based on the repeated measurements, the mean difference Ā(0), the dispersion estimate sA(θ), and the standard error of the mean uA(θ) were computed to quantify both the systematic trend and repeatability of the descriptor. To ensure consistent inter-angle comparison and suppress configuration-specific offsets, the results were compensated relative to the reference position θ=0° and normalized by the stripe width W=49,8 mm, producing the dimensionless descriptor Anorm(θ). A robust selection threshold is introduced as u95=P95(uA(θ)), which separates stable and unstable angles and enables forming the working set QW={θ : uA(θ) ≤ u95}. The effect of staff rotation on descriptor behavior and repeatability was statistically validated using a set of complementary tests, including ANOVA, regression modeling, permutation testing, and correlation measures, confirming that θ significantly influences digital stripe reading results. The proposed framework provides actionable recommendations for selecting admissible staff rotation angles and establishing an operational “working zone” QW, thereby improving the reliability of digital leveling when orthogonal staff alignment is impossible and consistent accuracy is required in constrained measurement geometries.
- 26 February 2026
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 16,p. 403-418
Open AccessDETERMINATION OF THE WORKING ZONE OF BARCODE RAIL ROTATION ANGLES BASED ON ROBUST ESTIMATION OF REPEATED MEASUREMENTS
This paper presents a repeatability-driven methodology for determining the working range of rotation angles of a barcode leveling staff about the vertical axis in digital leveling, addressing practical conditions where the staff plane cannot be aligned orthogonally to the line of sight due to restricted space (construction sites, narrow corridors, engineering niches, and deformation monitoring setups). Unlike purely geometric interpretations of a “limiting angle,” the proposed approach defines admissibility through measurement quality, i.e., the stability of repeated readings at each rotation angle. The experimental study was carried out under laboratory conditions using a Sokkia SDL30 digital level at a fixed distance of D = 2 m across the full rotation interval barcode rail −78°…+78°. For each angle θ, n = 20 repeated observations were collected using the S-E scheme, where the digital level readings were taken at the start and end edges of the same stripe. Based on the repeated measurements, the mean difference Ā(0), the dispersion estimate sA(θ), and the standard error of the mean uA(θ) were computed to quantify both the systematic trend and repeatability of the descriptor. To ensure consistent inter-angle comparison and suppress configuration-specific offsets, the results were compensated relative to the reference position θ=0° and normalized by the stripe width W=49,8 mm, producing the dimensionless descriptor Anorm(θ). A robust selection threshold is introduced as u95=P95(uA(θ)), which separates stable and unstable angles and enables forming the working set QW={θ : uA(θ) ≤ u95}. The effect of staff rotation on descriptor behavior and repeatability was statistically validated using a set of complementary tests, including ANOVA, regression modeling, permutation testing, and correlation measures, confirming that θ significantly influences digital stripe reading results. The proposed framework provides actionable recommendations for selecting admissible staff rotation angles and establishing an operational “working zone” QW, thereby improving the reliability of digital leveling when orthogonal staff alignment is impossible and consistent accuracy is required in constrained measurement geometries.
- 28 January 2026
- Published by Springer Nature in KN - Journal of Cartography and Geographic Information
- Vol. 76 (1) , 89-122
Enhancing Urban Land Use/Land Cover Classification Through the Synergistic Use of Multiple Spectral Indices: a Case Study of Kyiv, Ukraine
- 28 January 2026
- Published by Springer Nature in KN - Journal of Cartography and Geographic Information
- Vol. 76 (1) , 89-122
Enhancing Urban Land Use/Land Cover Classification Through the Synergistic Use of Multiple Spectral Indices: a Case Study of Kyiv, Ukraine
- Open Access
- 1 January 2025
- Published by Taras Shevchenko National University of Kyiv in Visnyk Taras Shevchenko National University of Kyiv. Military-Special Sciences
- No. 2 (62),p. 73-77
IMPACT OF PERSPECTIVE DISTORTION OF A BAR-CODE LEVELING STAFF FIELD ON THE ACCURACY OF DIGITAL LEVEL READINGS
B a c k g r o u n d . This article presents the results of theoretical analysis and numerical modelling of the influence of perspective distortion in the image of a bar-code leveling staff on the accuracy of readings obtained by a digital level. The study examines the displacement of the peak in the correlation function caused by the rotation of the staff around its vertical axis. It is analytically demonstrated that the reading error exhibits a quadratic dependence on the rotation angle of the staff. M e t h o d s . A systems analysis approach was used to comprehensively study the "level-staff" system. Projective geometry methods were applied to determine the dimensional changes in the bar elements due to perspective and their effect on the reading algorithm. Geometric analysis was employed to mathematically describe changes in the geometry of bar-code symbols during staff rotation. Correlation analysis was conducted to assess the relationship between the rotation angle of the staff, the distance to the staff, and the root-mean-square measurement error. R e s u l t s . Numerical modelling performed at a sighting distance of 30 metres showed that for rotation angles up to 5°, the resulting error remains within 0.2 mm, which is negligible for most practical measurements. However, at rotation angles exceeding 10°, the systematic error surpasses 0.8 mm, which is critical for high-precision levelling requirements. The study demonstrates that perspective distortion reduces the apparent size of the bar elements proportionally to the cosine of the rotation angle. C o n c l u s i o n s . The results of numerical modelling are consistent with analytical estimations, confirming the validity of the proposed model. The study concludes that controlling the position of the staff during measurement is essential to minimise systematic errors. The findings can be used to improve digital levelling technologies, develop methods for automatic staff positioning control, and enhance the overall accuracy of geodetic measurements.
- 1 January 2025
- Published by Taras Shevchenko National University of Kyiv in Visnyk Taras Shevchenko National University of Kyiv. Military-Special Sciences
- No. 2 (62),p. 73-77
Open AccessIMPACT OF PERSPECTIVE DISTORTION OF A BAR-CODE LEVELING STAFF FIELD ON THE ACCURACY OF DIGITAL LEVEL READINGS
B a c k g r o u n d . This article presents the results of theoretical analysis and numerical modelling of the influence of perspective distortion in the image of a bar-code leveling staff on the accuracy of readings obtained by a digital level. The study examines the displacement of the peak in the correlation function caused by the rotation of the staff around its vertical axis. It is analytically demonstrated that the reading error exhibits a quadratic dependence on the rotation angle of the staff. M e t h o d s . A systems analysis approach was used to comprehensively study the "level-staff" system. Projective geometry methods were applied to determine the dimensional changes in the bar elements due to perspective and their effect on the reading algorithm. Geometric analysis was employed to mathematically describe changes in the geometry of bar-code symbols during staff rotation. Correlation analysis was conducted to assess the relationship between the rotation angle of the staff, the distance to the staff, and the root-mean-square measurement error. R e s u l t s . Numerical modelling performed at a sighting distance of 30 metres showed that for rotation angles up to 5°, the resulting error remains within 0.2 mm, which is negligible for most practical measurements. However, at rotation angles exceeding 10°, the systematic error surpasses 0.8 mm, which is critical for high-precision levelling requirements. The study demonstrates that perspective distortion reduces the apparent size of the bar elements proportionally to the cosine of the rotation angle. C o n c l u s i o n s . The results of numerical modelling are consistent with analytical estimations, confirming the validity of the proposed model. The study concludes that controlling the position of the staff during measurement is essential to minimise systematic errors. The findings can be used to improve digital levelling technologies, develop methods for automatic staff positioning control, and enhance the overall accuracy of geodetic measurements.