Roman Sitko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Roman Sitko has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Rosario Proto
Department of AGRARIA, Mediterranean University of Reggio Calabria, Feo di Vito snc, 89122 Reggio Calabria, Italy
1 shared publication - Arne Nothdurft
Department of Forest and Soil Sciences, Institute of Forest Growth, University of Natural Resources and Life Sciences, Vienna (BOKU), 1190 Vienna, Austria
1 shared publication - B. Wolff
Eberswalde University for Sustainable Development
1 shared publication - C. Ammer
Georg-August-Universität Göttingen
1 shared publication - Catherine Collet
Université de Lorraine
1 shared publication - Cristóbal Ordóñez
Department of Plant Production and Forest Resources, SMART Ecosystems Research Group, Higher Technical School of Agricultural Engineering of Palencia, University Institute of Research in Sustainable Forest Management (iuFOR), Universidad de Valladolid, Palencia, Spain
1 shared publication
Latest Publications
- Open Access
- 20 April 2026
- Published by Springer Nature in Population and Environment
- Vol. 48 (2) , 8
The influence of the built–to–natural environment continuum on the life satisfaction of the older adult population in Europe
- 20 April 2026
- Published by Springer Nature in Population and Environment
- Vol. 48 (2) , 8
Open AccessThe influence of the built–to–natural environment continuum on the life satisfaction of the older adult population in Europe
- Open Access
- 22 October 2025
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 14 (11) , 408
Monte Carlo-Based Spatial Optimization of Simulation Plots for Forest Growth Modeling
Accurate placement and geometry of simulation plots are essential for spatially explicit modeling of forest ecosystems. This study introduces a Monte Carlo-based approach for optimizing the spatial alignment of simulation plots with their source polygons, improving their ability to represent stand-level heterogeneity. The method is implemented in GenSimPlot, an open-source Python plugin for QGIS (version 3.30) that automates the generation, placement, and refinement of simulation plots using simple geometric shapes. Monte Carlo optimization iteratively adjusts translation, rotation, and scaling parameters to maximize spatial congruence, thereby enhancing the fidelity of forest growth simulations. A built-in hyperparameter tuning module based on random search enables users to explore optimal parameter settings systematically. In addition, GenSimPlot supports the extraction of qualitative and quantitative environmental variables and terrain from raster datasets, facilitating integration with forest growth models and broader ecological simulations. The proposed approach improves plot representativeness and enables robust scenario analysis across heterogeneous landscapes.
- 22 October 2025
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 14 (11) , 408
Open AccessMonte Carlo-Based Spatial Optimization of Simulation Plots for Forest Growth Modeling
Accurate placement and geometry of simulation plots are essential for spatially explicit modeling of forest ecosystems. This study introduces a Monte Carlo-based approach for optimizing the spatial alignment of simulation plots with their source polygons, improving their ability to represent stand-level heterogeneity. The method is implemented in GenSimPlot, an open-source Python plugin for QGIS (version 3.30) that automates the generation, placement, and refinement of simulation plots using simple geometric shapes. Monte Carlo optimization iteratively adjusts translation, rotation, and scaling parameters to maximize spatial congruence, thereby enhancing the fidelity of forest growth simulations. A built-in hyperparameter tuning module based on random search enables users to explore optimal parameter settings systematically. In addition, GenSimPlot supports the extraction of qualitative and quantitative environmental variables and terrain from raster datasets, facilitating integration with forest growth models and broader ecological simulations. The proposed approach improves plot representativeness and enables robust scenario analysis across heterogeneous landscapes.
- Open Access
- 1 June 2025
- Published by Walter de Gruyter GmbH in Moravian Geographical Reports
- Vol. 33 (2) , 70-90
Detection and visualisation of terrain edges in slope failures
Our aim was to develop a pixel-based methodology employing multiple terrain parameters for the semi-automatic identification of terrain edges. The procedure was applied to landform features associated with slope failures, operating on different resolutions of a digital terrain model (DTM). We intended to produce two outputs – grid maps base on: discrete data allowing precise identification and revealing a higher incidence of terrain edges than a hillshade map; floating point data visually highlighting terrain edges more sharply than a hillshade grid. The results showed that the grid maps generated by the new method: Binary Terrain Edges – BinT and Quality Terrain – QT exhibited more terrain edges than the hillshade map. The method demonstrated its robustness when used across three different resolutions of DTM. It was applied within the protection buffer zone of the overhead transmission powerline (OHL). Slightly more than half of the total of identified and manually digitised slope failures using the hillshade map supplemented with failures observed in QT may not necessarily be subject to field confirmation. OHL is a long-distance construction passing a variety of environments. Therefore, the detection of slope failures requires semi-automatic or automatic procedures to be costless and time-saving.
- 1 June 2025
- Published by Walter de Gruyter GmbH in Moravian Geographical Reports
- Vol. 33 (2) , 70-90
Open AccessDetection and visualisation of terrain edges in slope failures
Our aim was to develop a pixel-based methodology employing multiple terrain parameters for the semi-automatic identification of terrain edges. The procedure was applied to landform features associated with slope failures, operating on different resolutions of a digital terrain model (DTM). We intended to produce two outputs – grid maps base on: discrete data allowing precise identification and revealing a higher incidence of terrain edges than a hillshade map; floating point data visually highlighting terrain edges more sharply than a hillshade grid. The results showed that the grid maps generated by the new method: Binary Terrain Edges – BinT and Quality Terrain – QT exhibited more terrain edges than the hillshade map. The method demonstrated its robustness when used across three different resolutions of DTM. It was applied within the protection buffer zone of the overhead transmission powerline (OHL). Slightly more than half of the total of identified and manually digitised slope failures using the hillshade map supplemented with failures observed in QT may not necessarily be subject to field confirmation. OHL is a long-distance construction passing a variety of environments. Therefore, the detection of slope failures requires semi-automatic or automatic procedures to be costless and time-saving.
- Open Access
- 27 September 2019
- Published by Springer Nature in European Journal of Forest Research
- Vol. 139 (3) , 349-367
Stand growth and structure of mixed-species and monospecific stands of Scots pine (Pinus sylvestris L.) and oak (Q. robur L., Quercus petraea (Matt.) Liebl.) analysed along a productivity gradient through Europe
Past failures of monocultures, caused by wind-throw or insect damages, and ongoing climate change currently strongly stimulate research into mixed-species stands. So far, the focus has mainly been on combinations of species with obvious complementary functional traits. However, for any generalization, a broad overview of the mixing reactions of functionally different tree species in different mixing proportions, patterns and under different site conditions is needed, including assemblages of species with rather similar demands on resources such as light. Here, we studied the growth of Scots pine and oak in mixed versus monospecific stands on 36 triplets located along a productivity gradient across Europe, reaching from Sweden to Spain and from France to Georgia. The set-up represents a wide variation in precipitation (456–1250 mm year−1), mean annual temperature (6.7–11.5 °C) and drought index by de Martonne (21–63 mm °C−1). Stand inventories and increment cores of trees stemming from 40- to 132-year-old, fully stocked stands on 0.04–0.94-ha-sized plots provided insight into how species mixing modifies stand growth and structure compared with neighbouring monospecific stands. On average, the standing stem volume was 436 and 360 m3 ha−1in the monocultures of Scots pine and oak, respectively, and 418 m3 ha−1in the mixed stands. The corresponding periodical annual volume increment amounted to 10.5 and 9.1 m3 ha−1 year−1in the monocultures and 10.5 m3 ha−1 year−1in the mixed stands. Scots pine showed a 10% larger quadratic mean diameter (p < 0.05), a 7% larger dominant diameter (p < 0.01) and a 9% higher growth of basal area and volume in mixed stands compared with neighbouring monocultures. For Scots pine, the productivity advantages of growing in mixture increased with site index (p < 0.01) and water supply (p < 0.01), while for oak they decreased with site index (p < 0.01). In total, the superior productivity of mixed stands compared to monocultures increased with water supply (p < 0.10). Based on 7843 measured crowns, we found that in mixture both species, but especially oak, had significantly wider crowns (p < 0.001) than in monocultures. On average, we found relatively small effects of species mixing on stand growth and structure. Scots pine benefiting on rich, and oak on poor sites, allows for a mixture that is productive and most likely climate resistant all along a wide ecological gradient. We discuss the potential of this mixture in view of climate change.
- 27 September 2019
- Published by Springer Nature in European Journal of Forest Research
- Vol. 139 (3) , 349-367
Open AccessStand growth and structure of mixed-species and monospecific stands of Scots pine (Pinus sylvestris L.) and oak (Q. robur L., Quercus petraea (Matt.) Liebl.) analysed along a productivity gradient through Europe
Past failures of monocultures, caused by wind-throw or insect damages, and ongoing climate change currently strongly stimulate research into mixed-species stands. So far, the focus has mainly been on combinations of species with obvious complementary functional traits. However, for any generalization, a broad overview of the mixing reactions of functionally different tree species in different mixing proportions, patterns and under different site conditions is needed, including assemblages of species with rather similar demands on resources such as light. Here, we studied the growth of Scots pine and oak in mixed versus monospecific stands on 36 triplets located along a productivity gradient across Europe, reaching from Sweden to Spain and from France to Georgia. The set-up represents a wide variation in precipitation (456–1250 mm year−1), mean annual temperature (6.7–11.5 °C) and drought index by de Martonne (21–63 mm °C−1). Stand inventories and increment cores of trees stemming from 40- to 132-year-old, fully stocked stands on 0.04–0.94-ha-sized plots provided insight into how species mixing modifies stand growth and structure compared with neighbouring monospecific stands. On average, the standing stem volume was 436 and 360 m3 ha−1in the monocultures of Scots pine and oak, respectively, and 418 m3 ha−1in the mixed stands. The corresponding periodical annual volume increment amounted to 10.5 and 9.1 m3 ha−1 year−1in the monocultures and 10.5 m3 ha−1 year−1in the mixed stands. Scots pine showed a 10% larger quadratic mean diameter (p < 0.05), a 7% larger dominant diameter (p < 0.01) and a 9% higher growth of basal area and volume in mixed stands compared with neighbouring monocultures. For Scots pine, the productivity advantages of growing in mixture increased with site index (p < 0.01) and water supply (p < 0.01), while for oak they decreased with site index (p < 0.01). In total, the superior productivity of mixed stands compared to monocultures increased with water supply (p < 0.10). Based on 7843 measured crowns, we found that in mixture both species, but especially oak, had significantly wider crowns (p < 0.001) than in monocultures. On average, we found relatively small effects of species mixing on stand growth and structure. Scots pine benefiting on rich, and oak on poor sites, allows for a mixture that is productive and most likely climate resistant all along a wide ecological gradient. We discuss the potential of this mixture in view of climate change.
- Open Access
- 26 April 2016
- Published by Copernicus GmbH in Earth System Dynamics
- Vol. 7 (2) , 385-395
Effect of various climate databases on the results of dendroclimatic analysis
The paper deals with the comparison of the time series drawn from different climate databases. We compared the observed data with the modeled data of monthly and seasonal temperature means and precipitation totals. Reliable and longest available time series of such data represent the basic starting point of dendroclimatic analyses. We evaluated the differences in the growth response of spruce derived using different databases of the considered climatic variables. The stem cores used to derive the cross-correlation function were taken from Hårås locality situated in the boreal zone of the Swedish part of Lapland. We compared the observed records from the nearest weather stations situated 18, 40, 70 and 110 km away from the locality with the interpolated data from four modeled temperature databases and four modeled precipitation databases generated by KNMI Climate Explorer. The spatial resolution of the modeled databases was 0.5° × 0.5° of latitude and longitude or 1° × 1° respectively. The evaluation revealed that in all modeled databases systematic errors of different magnitudes occurred. We also found that the radial increments of spruce correlated more tightly with the temperature than with the precipitation in the area of interest. Hence, in the conditions of the boreal zone, temperature could be a more important factor with regard to tree-ring formation. Because of higher spatial variability seen in precipitation data when compared to temperature data, we conclude that the nearest weather station is the most suitable for dendroclimatic analysis leaning on precipitation. Drawing on these results we recommend that the modeled precipitation and temperature databases examined in our study are used for dendroclimatic analyses within areas featuring a sparse network of weather stations.
- 26 April 2016
- Published by Copernicus GmbH in Earth System Dynamics
- Vol. 7 (2) , 385-395
Open AccessEffect of various climate databases on the results of dendroclimatic analysis
The paper deals with the comparison of the time series drawn from different climate databases. We compared the observed data with the modeled data of monthly and seasonal temperature means and precipitation totals. Reliable and longest available time series of such data represent the basic starting point of dendroclimatic analyses. We evaluated the differences in the growth response of spruce derived using different databases of the considered climatic variables. The stem cores used to derive the cross-correlation function were taken from Hårås locality situated in the boreal zone of the Swedish part of Lapland. We compared the observed records from the nearest weather stations situated 18, 40, 70 and 110 km away from the locality with the interpolated data from four modeled temperature databases and four modeled precipitation databases generated by KNMI Climate Explorer. The spatial resolution of the modeled databases was 0.5° × 0.5° of latitude and longitude or 1° × 1° respectively. The evaluation revealed that in all modeled databases systematic errors of different magnitudes occurred. We also found that the radial increments of spruce correlated more tightly with the temperature than with the precipitation in the area of interest. Hence, in the conditions of the boreal zone, temperature could be a more important factor with regard to tree-ring formation. Because of higher spatial variability seen in precipitation data when compared to temperature data, we conclude that the nearest weather station is the most suitable for dendroclimatic analysis leaning on precipitation. Drawing on these results we recommend that the modeled precipitation and temperature databases examined in our study are used for dendroclimatic analyses within areas featuring a sparse network of weather stations.