USUla Suliman

Ula Suliman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ula Suliman has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Glancing Angle Deposition for Enhanced Oxygen Evolution Reaction

    by Parsa Borhani, Aria Khalili, Ula Suliman, Jae‐Young Cho, Kenneth D. Harris, Shiva Mohajernia

    The oxygen evolution reaction (OER) presents a major kinetic challenge in alkaline water electrolysis. Nickel oxide (NiO) is generally accepted as a favorable material due to its abundance and stability, yet it also exhibits limited intrinsic catalytic activity. In this study, nanocolumnar NiO electrodes were fabricated using glancing angle deposition (GLAD), and key deposition parameters, film thickness, angle, and deposition rate, were systematically tuned to optimize OER performance. An overpotential of 311 mV at 10 mA/cm 2 was achieved for a 512 nm thick film deposited at 78° with an increasing‐rate profile. Interestingly, this performance peak coincided with a morphological transition zone within the nanocolumns, where growth dynamics likely promote a favorable defect landscape. In contrast, thicker films showed reduced activity, likely due to diminished defect density associated with further morphological evolution. Electrochemical cycling further enhanced performance via a self‐reconstruction process, forming branch‐like NiOOH/Ni(OH) 2 features and reducing the overpotential to 269 mV. These results highlight the impact of growth‐induced structural transitions and defect formation on catalytic performance, positioning GLAD as an effective platform for rational OER catalyst design.


  • Open Access

    Optimizing low-temperature defect engineering in TiO2 nanosheets for enhanced photocatalytic water splitting

    by Sadegh Pour-Ali, Diganta Sarkar, Ula Suliman, Majid Shahsanaei, Vladimir K. Michaelis, Shiva Mohajernia


  • Intrinsic CuOx Decoration of Defective TiO2 Nanotube Arrays for Enhanced Glycerol Electro-Oxidation

    by Ula Suliman, Jing Liu, Shiva Mohajernia

    Titanium dioxide (TiO2) is a well-studied photocatalytic material with versatile morphological and electronic properties. Upon decoration with Cu oxides (CuOx), it exhibits synergistic photoreduction properties, especially for hydrogen evolution.[1,2] However, in electrochemical contexts, TiO2 is largely unpopular due to its sluggish interfacial kinetics, especially caused by its wide band-gap n-semiconductor properties leading to current blockages in anodic applications.[3] Herein, we explore the intrinsic Cu-oxide decoration of anodic TiO2 nanotube arrays by anodizing Ti-Cu alloy foils coupled with treatment in a controlled reduction atmosphere. The resultant binder-free electrodes exhibit synergistic interactions between intrinsically embedded Cu nanoparticles and point defects within the TiO2 lattice. Furthermore, we elucidate the effect of Cu doping on the metal-support interaction properties of titania nanotube arrays using deposited Co catalysts as an example. We analyzed the electrochemical performance of the fabricated electrodes in the context of glycerol electro-oxidation considering the effect of TiO2 point defects in enhancing C-C and C-O bond cleavage. Linear sweep voltammetry measurements showed that the resultant electrodes exhibit up to 240 times greater electrocatalytic performance, successfully uplifting TiO2 from effective zero charge transfer behaviour. HAADF-STEM-EDX results, as well as XPS analysis, showed that the phase of Cu responsible for the improved performance is metallic nanoparticles embedded in the titania nanotube walls. [1] S. Hejazi et al. Electrochem commun, 2019, 98, 82–86. [2] L. Liu et al. Appl Catal B, 2013, 134–135, 349–358. [3] Sh. Mohajernia et al. Chemistry – A European Journal, 2017, 23, 12406–12411.

  • Exploring the Ultra-Low Loading of IrOx on TiO2 Nanotube Arrays Using a Facile Electrochemical Method

    by Ula Suliman, Jing Liu, Shiva Mohajernia

    Proton exchange membrane (PEM) water electrolyzers are key technologies in aiding the transition towards sustainable future energy systems. Despite their compatibility with other renewable energy sources, including wind and solar energy, the scarcity and the resultant high cost of the state-of-the-art water splitting catalysts such as iridium oxide, and the bottlenecked kinetic performance of the anodic oxygen evolution reaction (OER) limits the widespread use of PEM water electrolyzers. In this work, we present a simple methodology to boost the utilization of iridium oxide catalysts by decreasing the loading of iridium on TiO2 nanotube arrays. Self-assembled titania nanotubes with easily controllable morphology can be conveniently grown via room-temperature anodization, through which we intrinsically embed IrOx into the tube walls.[1] As TiO2 is an n-type semiconductor exhibiting current blockages in anodic electrochemical profiles, defect engineering techniques are used to introduce point defects such as Ti3+ and oxygen vacancies (VO) to enhance the conductive and electrocatalytic properties of the resultant IrOx@TiO2 catalyst.[2] The resultant binder-free electrodes were characterized using methods including X-ray photoelectron spectroscopy, HAADF-STEM, and electrochemical voltammetry tests. Results of this study give a novel perspective on designing low-loading OER catalysts using a simple one-pot strategy. [1] S. Hejazi et al, Appl Mater Today, 2019, 14, 118–125. [2] Sh. Mohajernia et al, Chemistry – A European Journal, 2017, 23, 12406–12411.

  • Open Access

    Ti–Cu alloy-based converted suboxides: robust electrode scaffolds for enhanced electrocatalytic glycerol oxidation

    by Ula Suliman, Jing Liu, Shiva Mohajernia

    Suboxide Cu–TiO 2 nanotube arrays fabricated using Ti–Cu alloy foils exhibit excellent scaffolding properties and enhanced glycerol electrooxidation performance.