ASAdel Saoudi

Adel Saoudi

*This is an algorithmically generated author record based on publicly available information.

Adel Saoudi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Microstructural Analysis and Mechanical Behaviour of Epoxy Composites With a Very High Nanofiller Content Synthetized by High Energy Ball Milling

    by S. Grairia, R. Slimani, A. Maanser, A. Saoudi, A. Ballah

    This study examines the addition of silica sand nanoparticles at 12 wt.%, 22 wt.%, 32 wt.%, 42 wt.%, 52 wt.%, and 62 wt.% into epoxy resin matrices (DGEBA, Medapoxy HR EA, and Medapoxy HR EB) to enhance their physical, mechanical, and microstructural properties. In research, Silica was successfully incorporated up to 42 wt.%, exceeding the typical 25 wt.% inorganic threshold. This incorporation significantly boosts the compressive, flexural, and tensile strengths of the nanocomposites to 113.685 MPa, 49.723 MPa, and 33.452 MPa, respectively, showing increases of 57.49%, 40.33%, and 37.31% over pure epoxy. The optimal silica content for maximizing mechanical properties lies between 32 wt.% and 42 wt.%. Scanning electron microscopy (SEM) reveals that pure epoxy has a smooth and brittle fracture surface, whereas epoxy/SiO₂ composites exhibit cohesive deformations and fractures due to the silica. However, silica content above 42 wt.% leads to nanoparticle agglomeration, which reduces performance. The study concludes that silica nanoparticles improve the mechanical properties of epoxy resin, making the nanocomposites more economical, durable, and suitable for various industrial and domestic applications. These findings support the development of high-performance materials from abundant natural byproducts.

  • Open Access

    Predictive Correlation Between Hardness and Tensile Properties of Submerged Arc Welded API X70 Steel

    by Ali Lahouel, Sameh Athmani, Amel Sedik, Adel Saoudi, Regis Barille, Lotfi Khezami, Ahlem Guesmi, Mamoun Fellah

    This research investigates the statistical correlation between Vickers hardness and tensile properties of helical submerged arc welded high-strength low-alloy (HSLA) API X70 pipeline steel. Tensile tests were performed on cross-weld joints from 138 pipe specimens. Vickers hardness measurements were also conducted on 138 samples to evaluate the hardness distribution across the base metal, fusion zone, and heat-affected zone. Results show that the fusion zone exhibits the highest hardness, correlating with enhanced tensile strength (R2 = 82%). Linear regression models indicate that base metal hardness significantly influences yield strength (R2 = 71%), while moderate negative correlations exist with elongation (R2 = 54%). These findings suggest that hardness measurements can serve as a non-destructive predictive tool for tensile properties, improving weld quality and mechanical performance. This research provides empirical models that enhance the application of API X70 in critical engineering applications, improving pipeline safety and reliability.