Boyu Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Boyu Du has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Xing Wang
Liaoning Province Key Laboratory of Paper and Pulp Engineering, Dalian Key Laboratory of High Value Application and Development of Botanical Resources, Key Laboratory of High Value Utilization of Botanical Resources of China National Light Industry Council, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
7 shared publications Jingyu Xu
College of Materials Science and Engineering, Heilongjiang Provinces Key Laboratory of Polymeric Composite materials Qiqihar University Wenhua Street Qiqihar 161006 China
5 shared publicationsJiajun Zhang
School of Light Industry and Food Engineering, Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control Guangxi University Nanning 530004 China
4 shared publicationsYuxuan Xie
School of Light Industry and Food Engineering, Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control Guangxi University Nanning 530004 China
4 shared publicationsJinghui Zhou
Liaoning Key Lab of Lignocellulose Chemistry and Bio Materials Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery College of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian 116034 P. R. China
3 shared publicationsYuxin Yang
School of Light Industry and Food Engineering, Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control Guangxi University Nanning 530004 China
3 shared publications
Latest Publications
- Open Access
- 28 July 2026
- Published by Wiley in Energy & Environmental Materials
- p. e70476
Lignocellulosic Triboelectric Materials for Energy Harvesting and Emerging Applications: A Review on Lignin‐Molecular Engineering toward Improved Performance
While triboelectric nanogenerators (TENGs) are promising platforms for distributed energy generation and self‐powered sensing, their heavy reliance on nonrenewable, petroleum‐derived materials hinders their sustainable development. To address this, abundant and biodegradable lignocellulosic biomass—particularly lignin, Earth's most abundant aromatic polymer—has emerged as a highly promising, low‐cost, and tunable feedstock for green triboelectric materials. This review systematically surveys recent advances in lignocellulose‐based triboelectric materials for energy harvesting, with a focus on the synergistic interplay between charge generation mechanisms and the structural diversity of biomass. It further elucidates strategies to enhance the performance of lignin‐based TENGs through chemical modification, morphological engineering, and composite design. In addition, the application potential of these materials in biomedical devices, environmental monitoring, and AI‐integrated systems is also assessed. Finally, the review outlines persisting challenges and future opportunities, including material standardization, scalable green manufacturing, and life cycle management.
- 28 July 2026
- Published by Wiley in Energy & Environmental Materials
- p. e70476
Open AccessLignocellulosic Triboelectric Materials for Energy Harvesting and Emerging Applications: A Review on Lignin‐Molecular Engineering toward Improved Performance
While triboelectric nanogenerators (TENGs) are promising platforms for distributed energy generation and self‐powered sensing, their heavy reliance on nonrenewable, petroleum‐derived materials hinders their sustainable development. To address this, abundant and biodegradable lignocellulosic biomass—particularly lignin, Earth's most abundant aromatic polymer—has emerged as a highly promising, low‐cost, and tunable feedstock for green triboelectric materials. This review systematically surveys recent advances in lignocellulose‐based triboelectric materials for energy harvesting, with a focus on the synergistic interplay between charge generation mechanisms and the structural diversity of biomass. It further elucidates strategies to enhance the performance of lignin‐based TENGs through chemical modification, morphological engineering, and composite design. In addition, the application potential of these materials in biomedical devices, environmental monitoring, and AI‐integrated systems is also assessed. Finally, the review outlines persisting challenges and future opportunities, including material standardization, scalable green manufacturing, and life cycle management.
- 10 April 2026
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 510, 142021
Bioinspired hierarchical nanofibers enable molecular discrimination for environment-adaptive functionality integration
- 10 April 2026
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 510, 142021
Bioinspired hierarchical nanofibers enable molecular discrimination for environment-adaptive functionality integration
- Open Access
Durable and Crack‐Resistant Dual‐Network C─Lignin‐Based Triboelectric Materials Enabled by Multiscale Crosslinking Strategy for Gait Monitoring and Identification
With the continuous advancement of social technology and the increasing awareness of health management, biomass‐based triboelectric nanogenerator (TENG) displayed significant potential as flexible wearable electronics for continuous foot gait monitoring. Nevertheless, existing biomass‐based TENG often faces challenges of insufficient mechanical robustness and durability in practical applications, where they are prone to surface abrasion and structural fracture under continuous compression and friction, severely limiting their long‐term performances. In order to address these challenges, this work proposed a multiscale crosslinking strategy, which strengthened the noncovalent interactions within the polymer by constructing multiple reinforcement networks, successfully fabricating a dual‐network C─lignin‐based triboelectric material (CLTM) with excellent durability and crack resistance. Among them, the optimal CLTM (PSGCL‐0.2) exhibited high mechanical strength (strain 445%, tensile strength 41.56 MPa, Young's modulus 41.25 MPa, toughness 159.67 MJ/m 3 ) and excellent cyclic stability (300 cycles) with versatile functionalities, including antibacterial, antioxidant, and UV‐shielding properties, water stabilization (255.51 g/m 2 /d), efficient photothermal conversion, and full recyclability. Furthermore, biomass‐based TENG device assembled from PSGCL‐0.2 achieved stable triboelectric output properties (102.5 V, 2.9 µA, and 61.3 nC), and sustainable for 2000 cycles, fast response time (68 ms), and excellent power density (325.9 mW/m 2 ), effectively converting mechanical energy into electrical energy. Especially, PSGCL‐0.2 was also integrated into the wireless self‐powered smart insole, successfully enabling real‐time visual monitoring of plantar pressure distribution and dynamic gait. Meanwhile, combined with the machine learning algorithm, the self‐powered smart insole achieved precise recognition and classification of eight different motion states with an accuracy of 98%. This study provides the feasible strategy for developing extremely stable and durable biomass‐based TENG, aimed at advancing sustainable intelligent healthcare systems.
Open AccessDurable and Crack‐Resistant Dual‐Network C─Lignin‐Based Triboelectric Materials Enabled by Multiscale Crosslinking Strategy for Gait Monitoring and Identification
With the continuous advancement of social technology and the increasing awareness of health management, biomass‐based triboelectric nanogenerator (TENG) displayed significant potential as flexible wearable electronics for continuous foot gait monitoring. Nevertheless, existing biomass‐based TENG often faces challenges of insufficient mechanical robustness and durability in practical applications, where they are prone to surface abrasion and structural fracture under continuous compression and friction, severely limiting their long‐term performances. In order to address these challenges, this work proposed a multiscale crosslinking strategy, which strengthened the noncovalent interactions within the polymer by constructing multiple reinforcement networks, successfully fabricating a dual‐network C─lignin‐based triboelectric material (CLTM) with excellent durability and crack resistance. Among them, the optimal CLTM (PSGCL‐0.2) exhibited high mechanical strength (strain 445%, tensile strength 41.56 MPa, Young's modulus 41.25 MPa, toughness 159.67 MJ/m 3 ) and excellent cyclic stability (300 cycles) with versatile functionalities, including antibacterial, antioxidant, and UV‐shielding properties, water stabilization (255.51 g/m 2 /d), efficient photothermal conversion, and full recyclability. Furthermore, biomass‐based TENG device assembled from PSGCL‐0.2 achieved stable triboelectric output properties (102.5 V, 2.9 µA, and 61.3 nC), and sustainable for 2000 cycles, fast response time (68 ms), and excellent power density (325.9 mW/m 2 ), effectively converting mechanical energy into electrical energy. Especially, PSGCL‐0.2 was also integrated into the wireless self‐powered smart insole, successfully enabling real‐time visual monitoring of plantar pressure distribution and dynamic gait. Meanwhile, combined with the machine learning algorithm, the self‐powered smart insole achieved precise recognition and classification of eight different motion states with an accuracy of 98%. This study provides the feasible strategy for developing extremely stable and durable biomass‐based TENG, aimed at advancing sustainable intelligent healthcare systems.
- Open Access
- 30 September 2025
- Published by Wiley in Advanced Science
- Vol. 12 (47) , e13337
From Industrial Waste to Multistage Applications: Ultralight Lignin‐Based Aerogel with Situ Vertically Oriented Structure for Photothermal‐Assisted Pb 2+ Adsorption in Wastewater and Reuse as Efficient Output and Stability Triboelectric Materials
In this work, the ultralight lignin‐based aerogel (GSPCAA) with situ vertically oriented structure is developed through a simple and green synthesis strategy for efficient photothermally assisted adsorption of Pb 2+ , and then reused as a lignin‐based triboelectric nanogenerator (TENG). Sulfonation is first performed on lignin's structure to enhance its water solubility and introduce the number of active adsorption sites. Then, GSPCAA is prepared using directed freezing and ionic crosslinking methods. The synergistic interactions between sulfonated lignin (SL) and graphene (GO) components endow GSPCAA with excellent photothermal properties, thereby generating the localized thermal environment on GSPCAA's surface to further improve the adsorption capacity of Pb 2+ . Finally, the spent adsorbent (GSPCAA‐Pb 2+ ) is applied as lignin‐based TENG for the first time to achieve multi‐stage application of lignin‐based adsorbent. It displays excellent electric signal output performances. Meanwhile, a 3 × 3 self‐powered array is designed to accurately identify and visualize the pressure distributions of different load objects. Besides, combined with deep learning model algorithms, an overall recognition accuracy of 98.5% is achieved in the classification and identification of 11 different objects, fully indicating its application potential in the field of smart homes.
- 30 September 2025
- Published by Wiley in Advanced Science
- Vol. 12 (47) , e13337
Open AccessFrom Industrial Waste to Multistage Applications: Ultralight Lignin‐Based Aerogel with Situ Vertically Oriented Structure for Photothermal‐Assisted Pb 2+ Adsorption in Wastewater and Reuse as Efficient Output and Stability Triboelectric Materials
In this work, the ultralight lignin‐based aerogel (GSPCAA) with situ vertically oriented structure is developed through a simple and green synthesis strategy for efficient photothermally assisted adsorption of Pb 2+ , and then reused as a lignin‐based triboelectric nanogenerator (TENG). Sulfonation is first performed on lignin's structure to enhance its water solubility and introduce the number of active adsorption sites. Then, GSPCAA is prepared using directed freezing and ionic crosslinking methods. The synergistic interactions between sulfonated lignin (SL) and graphene (GO) components endow GSPCAA with excellent photothermal properties, thereby generating the localized thermal environment on GSPCAA's surface to further improve the adsorption capacity of Pb 2+ . Finally, the spent adsorbent (GSPCAA‐Pb 2+ ) is applied as lignin‐based TENG for the first time to achieve multi‐stage application of lignin‐based adsorbent. It displays excellent electric signal output performances. Meanwhile, a 3 × 3 self‐powered array is designed to accurately identify and visualize the pressure distributions of different load objects. Besides, combined with deep learning model algorithms, an overall recognition accuracy of 98.5% is achieved in the classification and identification of 11 different objects, fully indicating its application potential in the field of smart homes.
- 8 September 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 328 (Pt 2) , 147528
Preparation of high-performance phenolic resin adhesives using demethylated lignin as substitutes for phenol
- 8 September 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 328 (Pt 2) , 147528
Preparation of high-performance phenolic resin adhesives using demethylated lignin as substitutes for phenol
- Open Access
- 26 July 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (15) , 1157
Schiff Base-Functionalized Melamine Sponge with Hierarchical Porous Architecture for High-Efficiency Removal of Organic Dyes in Wastewater
Melamine sponges have demonstrated significant application potential in the field of adsorption materials due to their unique three-dimensional porous network structure, excellent chemical/mechanical stability, and abundant amino active sites on the surface. However, the development of modified melamine sponges with efficient Congo red dye removal capabilities remains a substantial challenge. In this study, a stable linear polymer network structure was constructed on the surface of melamine sponges via an in situ polymerization strategy based on the Schiff base reaction mechanism. Characterization analyses reveal that the modified sponge not only retained the original porous skeleton structure but also significantly enhanced the density of surface active sites. Experimental data demonstrate that the modified sponge exhibited excellent adsorption performance for Congo red dye, with the adsorption process conforming to the pseudo-second-order kinetic model and achieving a practical maximum adsorption capacity of 380.4 mg/g. Notably, the material also displayed favorable cyclic stability. This study provides an efficient adsorbent for Congo red dye-contaminated wastewater treatment through the development of a novel surface-functionalized sponge material while also offering new solutions for advancing the practical applications of melamine-based porous materials and environmental remediation technologies.
- 26 July 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (15) , 1157
Open AccessSchiff Base-Functionalized Melamine Sponge with Hierarchical Porous Architecture for High-Efficiency Removal of Organic Dyes in Wastewater
Melamine sponges have demonstrated significant application potential in the field of adsorption materials due to their unique three-dimensional porous network structure, excellent chemical/mechanical stability, and abundant amino active sites on the surface. However, the development of modified melamine sponges with efficient Congo red dye removal capabilities remains a substantial challenge. In this study, a stable linear polymer network structure was constructed on the surface of melamine sponges via an in situ polymerization strategy based on the Schiff base reaction mechanism. Characterization analyses reveal that the modified sponge not only retained the original porous skeleton structure but also significantly enhanced the density of surface active sites. Experimental data demonstrate that the modified sponge exhibited excellent adsorption performance for Congo red dye, with the adsorption process conforming to the pseudo-second-order kinetic model and achieving a practical maximum adsorption capacity of 380.4 mg/g. Notably, the material also displayed favorable cyclic stability. This study provides an efficient adsorbent for Congo red dye-contaminated wastewater treatment through the development of a novel surface-functionalized sponge material while also offering new solutions for advancing the practical applications of melamine-based porous materials and environmental remediation technologies.
- 9 July 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (1)
Robust and Tough Recyclable C‐lignin‐Based Triboelectric Materials Enabled by Nano‐Confinement and Solvent‐Induced Effects
Developing biomass‐based triboelectric films with excellent robust and superior tough is crucial for realizing next‐generation green, sustainable and flexible wearable sensors. However, simultaneously achieving highly robust and superior tough in biomass‐based triboelectric films remains a significant challenge. In this study, inspired by natural creatures, particularly spider silk, based on the structural properties of catechol lignin (C‐lignin, CL) and the synergistic effects of nano‐confinement and solvent‐induced, the robust and tough recyclable C‐lignin‐based triboelectric films (CNT/CL/PVA film, CCLPF) with a multi‐scale reinforcement network was successfully constructed. The prepared lignin‐based films exhibited high tensile strength (43.1 MPa, 816%), excellent fracture toughness (512.3 MJ m −3 ), outstanding energy dissipation efficiency (94.9%), superior antibacterial properties, significant antioxidant capacity, and stable triboelectric output performance (245.1 V and 7500 cycles). Notably, a self‐powered sensor array is also designed that could accurately perceive pressure distribution changes of different objects, thereby meeting diverse application demands and ultimately providing important technical pathways for the development of wearable devices and human‐machine interaction systems. In summary, this study not only offers a novel solution to the conflict between robust and tough in biomass‐based triboelectric films but also opens new avenues for the extensive application of lignin resources in flexible electronics and self‐powered sensing technologies.
- 9 July 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (1)
Robust and Tough Recyclable C‐lignin‐Based Triboelectric Materials Enabled by Nano‐Confinement and Solvent‐Induced Effects
Developing biomass‐based triboelectric films with excellent robust and superior tough is crucial for realizing next‐generation green, sustainable and flexible wearable sensors. However, simultaneously achieving highly robust and superior tough in biomass‐based triboelectric films remains a significant challenge. In this study, inspired by natural creatures, particularly spider silk, based on the structural properties of catechol lignin (C‐lignin, CL) and the synergistic effects of nano‐confinement and solvent‐induced, the robust and tough recyclable C‐lignin‐based triboelectric films (CNT/CL/PVA film, CCLPF) with a multi‐scale reinforcement network was successfully constructed. The prepared lignin‐based films exhibited high tensile strength (43.1 MPa, 816%), excellent fracture toughness (512.3 MJ m −3 ), outstanding energy dissipation efficiency (94.9%), superior antibacterial properties, significant antioxidant capacity, and stable triboelectric output performance (245.1 V and 7500 cycles). Notably, a self‐powered sensor array is also designed that could accurately perceive pressure distribution changes of different objects, thereby meeting diverse application demands and ultimately providing important technical pathways for the development of wearable devices and human‐machine interaction systems. In summary, this study not only offers a novel solution to the conflict between robust and tough in biomass‐based triboelectric films but also opens new avenues for the extensive application of lignin resources in flexible electronics and self‐powered sensing technologies.
- 9 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 307 (Pt 1) , 141865
Preparation of economical and reusable novel multi-chemically modified lignin-based adsorbent for efficient adsorption of lead ions
- 9 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 307 (Pt 1) , 141865
Preparation of economical and reusable novel multi-chemically modified lignin-based adsorbent for efficient adsorption of lead ions
- 4 December 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 285, 138240
Lignin-based materials for iodine capture and storage: A review
- 4 December 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 285, 138240
Lignin-based materials for iodine capture and storage: A review