JCJunfeng Chen

Junfeng Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Junfeng Chen has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Time-Delay-Interferometry-Based 600km Millihertz Fiber-Optic Forward Transmission Vibration Sensor

    by Ke Ai, Cunzheng Fan, Junfeng Chen, Shuolong Zhu, Hao Li, Zhilin Xu, Zhijun Yan, Deming Liu, Qizhen Sun

    Optical fiber vibration sensors play a vital role in applications requiring precise low-frequency disturbance detection, such as ocean seismic monitoring and structural health assessment. However, laser frequency noise, especially frequency drift, severely limits the sensitivity and signal-to-noise ratio (SNR) of conventional long-distance low-frequency sensing systems. In this work, we propose a novel forward-transmission fiber-optic vibration sensing technique based on Time Delay Interferometry (TDI), originally developed for space-based gravitational wave detection. By implementing a dual Mach-Zehnder interferometer configuration and applying time-delayed linear combinations of phase signals from both interferometers, the system effectively cancels laser frequency drift-induced phase noise. Numerical simulations demonstrate that this approach achieves over 30 dB SNR enhancement and 100 dB noise floor (NF) suppression for signals in the millihertz to hertz band over distances up to 1000 km. Experimental validation over a 600 km standard single-mode fiber link confirms a minimum SNR gain of 31.18 dB and noise suppression of 155.31 dB @ 10 mHz. In addition, the strain resolution reaches 1.5 nϵ/√Hz @ 10 mHz. Furthermore, the proposed TDI method outperforms conventional differential method in terms of SNR enhancement and NF suppression, and it enables simultaneous, independent detection of signals from both interferometers. This technique significantly advances long-range, ultra-low-frequency fiber-optic vibration sensing and holds promise for applications including submarine seismic monitoring and enhanced security in high-risk environments.


  • Near-Field Multisource Localization and Signal Enhancement With ASP-Assisted DAS

    by Junfeng Chen, Hao Li, Ke Ai, Shuolong Zhu, Cunzheng Fan, Zhijun Yan, Qizhen Sun

    Since the superiorities of large-scale and distributed measurement, the fiber-optic distributed acoustic sensing (DAS) technique can collect plenty of distributed acoustic signals. Therefore, it has been gradually applied to perimeter security applications recently. However, the multisource near-field 2-D and 3-D localization and signal enhancement without aliasing noise for large-scale DAS has not been achieved yet, which are highly necessary for large-scale perimeter security applications. So, in this work, the DAS assisted with near-field array signal processing (ASP) is further developed and demonstrated, in which the near-field multiple signal classification (NF-MUSIC) algorithm is developed to achieve the near-field multisource localization. Then, based on the obtained target source position, the minimum variance distortionless response beamformer (MVDR-BF) is further proposed to enhance target signal in DAS, including multisource aliasing noise. In lab test, the maximum localization error no more than 0.03 m and 0.3° is demonstrated by using the proposed ASP-assisted DAS. And the acoustic target tracking is also achieved in underwater field test. Then, the signal to noise ratio (SNR) of the target source in lab and underwater test is averagely enhanced about 9.7 and 16.8 dB by, respectively, using 5 and 20 channels. To the best of our knowledge, it is the first time to achieve the near-field multisource localization and signal enhancement for fiber-optic DAS. Substantially, this work has been greatly verified the proposed scheme that can further expand and promote the large-scale DAS practical applications, including the low-altitude and underwater multitarget detection, localization, and recognition.


  • A Waveguide-fed One-dimensional Bulleye Antenna

    by Jingxian Yang, Long Xiao, Junfeng Chen

    This paper presents a waveguide-fed one-dimensional bull-eye antenna, which innovatively combines a waveguide slot array antenna with a bull-eye antenna. The antenna array uses a simple bulleye structure and the feeding uses the waveguide slot antenna with a large power capacity. The simulation results show that the antenna has a high gain of 23dBi and a power capacity of 9MW at 1.9GHz. The antenna gain increases with the increase of the number of grooves of the bulleye antenna or the number of slots in the waveguide. The antenna has the features of high gain, low loss, high power capacity, low cost and easy conformation.

  • A Soft Switching of the Three-level Neutral Point Clamp Isolation Bidirectional Converter

    by Gao Chongwei, Wang Chongwu, Zhao Yangyang, Chen Junfeng, Duan Caishuai

    This paper proposes a new type of three-level neutral point clamp isolated bidirectional Dc-Dc converter (3L-NPC IBDC). The proposed converter can significantly improve the power factor, and can achieve a high-voltage and high-efficiency as well. In this work, a detailed analysis the relationship between the phase and duty cycle of the transmission power and output voltage of the presented 3L-NPC IBDC converter. Furthermore, the operating range of the zero-voltage switching (ZVS) is emphatically investigated for both modes. An improved efficiency of 3L-NPC IBDC is accordingly achieved by reducing the switching loss with ZVS. A corresponding simulation model and experimental platform are then set up to demonstrate the corrections of the presented theoretical analyses, and the simulated and experimental results explicitly verify the performance predicted by the theoretical analyses.


  • Signal process method research about multi-component seismic wave induced by moving ship

    by Junfeng Chen, Junjun Lv, Pei Cui, Yunchao Wu

    The energy generated by the vibration and noise from the body of a moving ship will be partially transmitted to the sea-bed, and continue to be transmitted in the manner of seismic waves. This cycle of induction persists as the ship continues moving. This is different from the sources of natural waves or artificially stimulated seismic waves, which usually emit an enormous amount of energy within a very short period. A ship however, continuously release energy to cause more seismic waves as it moves along. As a result, most of the regular processing methods in seismology are no longer feasible for processing seismic waves induced by ships. Therefore, new processing methods for this particular type of seismic wave need to be discovered and carefully explored, starting with an effective and thorough understanding of the characteristics of seismic waves. In this report, we measure three-component seismic waves induced by ships, which are successfully analyzed and processed based on the study of the processing methods of acoustic and others continuous signals generated by moving ships. This proves that the use of the multi-component processing method is effective.