Yi Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yi Chen has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ronghuan Xie
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
4 shared publications - Yiming Zhang
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
4 shared publications - Xingkui Mao
Fuzhou University
3 shared publications - Xiaoying Chen
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
2 shared publications - Yizhan Zhuang
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
2 shared publications - Fanghui Yin
Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
1 shared publication
Latest Publications
- Top Cited Papers
- 21 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-6
Wireless Charging System Based on Dynamic Phase-Shift Controlled Dual-Transmitting Coils and Its Misalignment Tolerance Mechanism
To address the offset issue in the field of wireless power transfer, a wireless charging system based on dynamic phase-shift controlled dual-transmitting coils is proposed in this letter. The proposed system splits the traditional single-transmitting coil into two independent coils and adopts the LCC-S compensation topology. When the receiving coil is slightly offset, only the primary transmitting coil operates; as misalignment increases, the system smoothly switches to dual-transmitting coil mode by adjusting the phase-shift angle of the secondary inverter, thereby maintaining stable output. Theoretical analysis indicates that the output voltage can be compensated for changes in mutual inductance through phase-shift control. Experimental validation shows that the proposed system maintains stable and efficient output under misalignment conditions. Compared with the traditional solutions, the proposed scheme offers a more promising solution for the offset issue.
- 21 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-6
Top Cited PapersWireless Charging System Based on Dynamic Phase-Shift Controlled Dual-Transmitting Coils and Its Misalignment Tolerance Mechanism
To address the offset issue in the field of wireless power transfer, a wireless charging system based on dynamic phase-shift controlled dual-transmitting coils is proposed in this letter. The proposed system splits the traditional single-transmitting coil into two independent coils and adopts the LCC-S compensation topology. When the receiving coil is slightly offset, only the primary transmitting coil operates; as misalignment increases, the system smoothly switches to dual-transmitting coil mode by adjusting the phase-shift angle of the secondary inverter, thereby maintaining stable output. Theoretical analysis indicates that the output voltage can be compensated for changes in mutual inductance through phase-shift control. Experimental validation shows that the proposed system maintains stable and efficient output under misalignment conditions. Compared with the traditional solutions, the proposed scheme offers a more promising solution for the offset issue.
- 6 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 4447-4458
A Family of Dual-Frequency Dual-Channel Anti-Offset Wireless Power Transfer System
In wireless power transfer (WPT) systems, different topologies, such as series-series (S-S), S-LCC, LCC-S, and LCC-LCC, have different output characteristics, such as constant-current (CC) and constant-voltage (CV) outputs. They can be connected in series or parallel on either the transmitter or receiver sides and on either the ac or dc sides, forming dual-channel topology to achieve misalignment tolerance. The characteristics of all series-parallel CC and CV topologies for dual channels are investigated, including the combination principle and pattern. A dual-frequency dual-channel anti-offset WPT system is proposed on the basis of S-S and LCC-LCC topologies connected in parallel on the dc side. The two channels operate on different frequencies, so the anti-offset performance is enhanced. The unipolar and bipolar coils are employed as the power coils for these two channels so that decoupling is realized. An experimental prototype is established, which proves the feasibility of the scheme. The peak efficiency is 91.8% and the misalignment tolerance is 53.3%.
- 6 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 4447-4458
A Family of Dual-Frequency Dual-Channel Anti-Offset Wireless Power Transfer System
In wireless power transfer (WPT) systems, different topologies, such as series-series (S-S), S-LCC, LCC-S, and LCC-LCC, have different output characteristics, such as constant-current (CC) and constant-voltage (CV) outputs. They can be connected in series or parallel on either the transmitter or receiver sides and on either the ac or dc sides, forming dual-channel topology to achieve misalignment tolerance. The characteristics of all series-parallel CC and CV topologies for dual channels are investigated, including the combination principle and pattern. A dual-frequency dual-channel anti-offset WPT system is proposed on the basis of S-S and LCC-LCC topologies connected in parallel on the dc side. The two channels operate on different frequencies, so the anti-offset performance is enhanced. The unipolar and bipolar coils are employed as the power coils for these two channels so that decoupling is realized. An experimental prototype is established, which proves the feasibility of the scheme. The peak efficiency is 91.8% and the misalignment tolerance is 53.3%.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (1) , 1293-1301
A Bidirectional AGV Wireless Charging System Capable of Vehicle-to-Vehicle Wireless Charging With Shared Bridge Arms
In industrial scenarios, if one automatic guided vehicle (AGV) can be used as an energy supply to charge another AGV, the application will be more flexible. A multistage and multimode vehicle-to-vehicle (V2V) wireless power transfer (WPT) system is proposed to allow energy flow among multiple AGVs. The proposed system is divided into four operating modes, namely One to One, One to Two, Two to One, and Relay Mode. In the proposed V2V WPT system, bridge arms are shared for different modes. A mathematical model and an experimental prototype are developed. The experimental results are in good agreement with the theoretical ones, which shows the feasibility of the proposed system, which provides a novel solution for the V2V wireless charging system. The system efficiency can reach up to 94.7%. The maximum power can reach 2400 W.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (1) , 1293-1301
A Bidirectional AGV Wireless Charging System Capable of Vehicle-to-Vehicle Wireless Charging With Shared Bridge Arms
In industrial scenarios, if one automatic guided vehicle (AGV) can be used as an energy supply to charge another AGV, the application will be more flexible. A multistage and multimode vehicle-to-vehicle (V2V) wireless power transfer (WPT) system is proposed to allow energy flow among multiple AGVs. The proposed system is divided into four operating modes, namely One to One, One to Two, Two to One, and Relay Mode. In the proposed V2V WPT system, bridge arms are shared for different modes. A mathematical model and an experimental prototype are developed. The experimental results are in good agreement with the theoretical ones, which shows the feasibility of the proposed system, which provides a novel solution for the V2V wireless charging system. The system efficiency can reach up to 94.7%. The maximum power can reach 2400 W.
- 15 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 14975-14979
A Lightweight Bidirectional Wireless Energy Carrier Without Drone-Side Compensation and Ferrite for Devices in Inaccessible Places
The power supply issue for electrical devices in harsh and dangerous environments is challenging. This letter proposes a power supply solution using drones as an energy carrier to charge such devices. The drone is wirelessly charged at the ground-side station and then flies to the target place to charge the devices wirelessly. To achieve a compact and lightweight structure, the helical coupler is designed without compensation components and ferrite on the drone side. Thus, a drone-side uncompensated bidirectional wireless charging system is formed. Compensation capacitors and inductors are employed on the ground side to achieve zero phase angle. The antioffset performance and the constant-voltage output characteristic of the system are investigated. The experimental results verified that the proposed approach can be a competitive solution for charging devices in inaccessible places.
- 15 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 14975-14979
A Lightweight Bidirectional Wireless Energy Carrier Without Drone-Side Compensation and Ferrite for Devices in Inaccessible Places
The power supply issue for electrical devices in harsh and dangerous environments is challenging. This letter proposes a power supply solution using drones as an energy carrier to charge such devices. The drone is wirelessly charged at the ground-side station and then flies to the target place to charge the devices wirelessly. To achieve a compact and lightweight structure, the helical coupler is designed without compensation components and ferrite on the drone side. Thus, a drone-side uncompensated bidirectional wireless charging system is formed. Compensation capacitors and inductors are employed on the ground side to achieve zero phase angle. The antioffset performance and the constant-voltage output characteristic of the system are investigated. The experimental results verified that the proposed approach can be a competitive solution for charging devices in inaccessible places.