Xiangdong Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiangdong Ma has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Bing Yang
School of Power & Mechanical Engineering, Wuhan University, Wuhan 430072, China
3 shared publications - Huayong Hu
Special equipment safety supervision inspection institute of Jiangsu province, Nanjing 210036, China
3 shared publications - Shen He
Special equipment safety supervision inspection institute of Jiangsu province, Nanjing 210036, China
3 shared publications - Wenli Dong
Special equipment safety supervision inspection institute of Jiangsu province, Nanjing 210036, China
3 shared publications - Xiao Wu
Special equipment safety supervision inspection institute of Jiangsu province, Nanjing 210036, China
3 shared publications - Yonghua Yu
Special equipment safety supervision inspection institute of Jiangsu province, Nanjing 210036, China
3 shared publications
Latest Publications
- Open Access
Damage Evolution of a Type IV Composite Pressure Vessel Based on High-Frequency Acoustic Emission Signals and Background-Energy Analysis
This study investigates damage evolution in a polymer-lined, fully wrapped Type IV composite pressure vessel containing artificial local defects under stepwise hydrostatic loading. A 70 MPa vessel was pressurized in 20 MPa increments to 160 MPa, while acoustic emission (AE) was monitored continuously. Ball-impact calibration established the relationship between input mechanical energy and AE waveform energy. Three high-frequency criteria based on waveform and band-limited energy ratios were used to identify fiber-fracture-related high-frequency signals, while ratios between adjacent background-energy characteristic points were used to identify background-energy oscillation (BEO). The calibration yielded a mechanical-to-AE energy conversion coefficient of 1.92354 × 10−6 with R2 = 0.9707. No high-frequency signals or BEOs were detected during the 20–80 MPa holds. At 100 MPa, two high-frequency signals and four BEOs occurred, with a maximum adjacent-point ratio of 4.63, suggesting the coexistence of high-frequency responses consistent with fiber-dominated damage and continuous weak AE activity. At 140 MPa, three high-frequency signals indicated the re-emergence of localized high-frequency activity after stress re-equilibration. At 160 MPa, 23 high-frequency signals, a maximum C1 of 1330.434, and six BEOs reflected pronounced damage-related AE activity in the composite overwrap. The combined approach captures staged damage evolution and supports AE-based integrity assessment of composite pressure vessels.
Open AccessDamage Evolution of a Type IV Composite Pressure Vessel Based on High-Frequency Acoustic Emission Signals and Background-Energy Analysis
This study investigates damage evolution in a polymer-lined, fully wrapped Type IV composite pressure vessel containing artificial local defects under stepwise hydrostatic loading. A 70 MPa vessel was pressurized in 20 MPa increments to 160 MPa, while acoustic emission (AE) was monitored continuously. Ball-impact calibration established the relationship between input mechanical energy and AE waveform energy. Three high-frequency criteria based on waveform and band-limited energy ratios were used to identify fiber-fracture-related high-frequency signals, while ratios between adjacent background-energy characteristic points were used to identify background-energy oscillation (BEO). The calibration yielded a mechanical-to-AE energy conversion coefficient of 1.92354 × 10−6 with R2 = 0.9707. No high-frequency signals or BEOs were detected during the 20–80 MPa holds. At 100 MPa, two high-frequency signals and four BEOs occurred, with a maximum adjacent-point ratio of 4.63, suggesting the coexistence of high-frequency responses consistent with fiber-dominated damage and continuous weak AE activity. At 140 MPa, three high-frequency signals indicated the re-emergence of localized high-frequency activity after stress re-equilibration. At 160 MPa, 23 high-frequency signals, a maximum C1 of 1330.434, and six BEOs reflected pronounced damage-related AE activity in the composite overwrap. The combined approach captures staged damage evolution and supports AE-based integrity assessment of composite pressure vessels.
- Open Access
Pitting Corrosion Resistance of LDED-Manufactured IN625-YSZ Coatings Exposed to Sulfide-Containing NaCl Solution
Pitting corrosion is a more insidious and dangerous failure mode than uniform corrosion for protective coatings in marine environments, especially when sulfide ions (S2−) are present. In this work, Inconel 625 (IN625) and IN625-5 wt.% yttria-stabilized zirconia (YSZ) composite coatings were fabricated on 20G steel by laser-directed energy deposition (LDED) using optimized parameters. The coatings exhibit dense microstructures, with porosities of 1.87% ± 0.10% and 1.67% ± 0.10%, respectively. The pitting resistance was systematically evaluated by cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution without and with 20 ppm Na2S. The CPP results show that the addition of YSZ decreases the pitting potential (Epit) and protection potential (Eprot), indicating reduced resistance to pit initiation, while the smaller hysteresis loop suggests an improved tendency for repassivation. S2− induces a notable drop in Eprot and impairs repassivation for both coatings, yet the IN625-YSZ coating retains a slightly higher Eprot than IN625. EIS analysis reveals that the IN625-YSZ coating in S2−-containing solution shows an increased Rct of 2.738 × 105 Ω·cm2 compared with its counterpart in 3.5 wt.% NaCl solution, while the corresponding RL decreases to 2.513 Ω·cm2, suggesting a weakened outer barrier layer despite partial interfacial blocking. Post-corrosion morphology shows that YSZ particles act as preferential pitting nucleation sites; in sulfide-free solution they produce numerous shallow pits, whereas in S2−-containing solution they lead to larger and deeper pits. The results may provide a reference for the future design and evaluation of LDED-manufactured composite coatings under sulfide-containing marine environments.
Open AccessPitting Corrosion Resistance of LDED-Manufactured IN625-YSZ Coatings Exposed to Sulfide-Containing NaCl Solution
Pitting corrosion is a more insidious and dangerous failure mode than uniform corrosion for protective coatings in marine environments, especially when sulfide ions (S2−) are present. In this work, Inconel 625 (IN625) and IN625-5 wt.% yttria-stabilized zirconia (YSZ) composite coatings were fabricated on 20G steel by laser-directed energy deposition (LDED) using optimized parameters. The coatings exhibit dense microstructures, with porosities of 1.87% ± 0.10% and 1.67% ± 0.10%, respectively. The pitting resistance was systematically evaluated by cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution without and with 20 ppm Na2S. The CPP results show that the addition of YSZ decreases the pitting potential (Epit) and protection potential (Eprot), indicating reduced resistance to pit initiation, while the smaller hysteresis loop suggests an improved tendency for repassivation. S2− induces a notable drop in Eprot and impairs repassivation for both coatings, yet the IN625-YSZ coating retains a slightly higher Eprot than IN625. EIS analysis reveals that the IN625-YSZ coating in S2−-containing solution shows an increased Rct of 2.738 × 105 Ω·cm2 compared with its counterpart in 3.5 wt.% NaCl solution, while the corresponding RL decreases to 2.513 Ω·cm2, suggesting a weakened outer barrier layer despite partial interfacial blocking. Post-corrosion morphology shows that YSZ particles act as preferential pitting nucleation sites; in sulfide-free solution they produce numerous shallow pits, whereas in S2−-containing solution they lead to larger and deeper pits. The results may provide a reference for the future design and evaluation of LDED-manufactured composite coatings under sulfide-containing marine environments.
- Open Access
Prediction of Damage Distribution in Gas Cylinder Stages Based on Semi-Supervised and Transfer Learning Algorithms
Currently, clustering algorithms are mainly used to classify fiber-reinforced composite cylinder damage. However, the number of clustering categories is heavily influenced by the evaluation criteria, and the real damage type categorization cannot be determined. Therefore, we propose a semi-supervised algorithm that obtains higher damage classification information with a small number of labels. Specifically, we first performed a phased fiber-reinforced composite cylinder pressurization experiment and collected damage signals through acoustic emission (AE) hits. We analyzed the damage types of the collected burst-type acoustic emission hits (each hit corresponds to a single waveform captured when the hit’s amplitude exceeds the preset threshold) and marked a small number of these hits. Then, we constructed a mean-teacher semi-supervised network structure based on transfer learning, achieving a classification accuracy of 85.92%. Compared to traditional supervised learning and clustering algorithms, the accuracy improved by nearly 30%.
Open AccessPrediction of Damage Distribution in Gas Cylinder Stages Based on Semi-Supervised and Transfer Learning Algorithms
Currently, clustering algorithms are mainly used to classify fiber-reinforced composite cylinder damage. However, the number of clustering categories is heavily influenced by the evaluation criteria, and the real damage type categorization cannot be determined. Therefore, we propose a semi-supervised algorithm that obtains higher damage classification information with a small number of labels. Specifically, we first performed a phased fiber-reinforced composite cylinder pressurization experiment and collected damage signals through acoustic emission (AE) hits. We analyzed the damage types of the collected burst-type acoustic emission hits (each hit corresponds to a single waveform captured when the hit’s amplitude exceeds the preset threshold) and marked a small number of these hits. Then, we constructed a mean-teacher semi-supervised network structure based on transfer learning, achieving a classification accuracy of 85.92%. Compared to traditional supervised learning and clustering algorithms, the accuracy improved by nearly 30%.
- Open Access
In Situ Strain Monitoring of a Type IV Composite Hydrogen Storage Vessel Under Hydraulic Fatigue Using Embedded FBG Sensors
A 70 MPa Type IV hydrogen composite pressure vessel (CPV) was instrumented with embedded Fiber Bragg Grating (FBG) sensors to realize in situ strain monitoring during hydraulic fatigue cycles. FBG arrays were co-wound with carbon fibers during the filament winding process, forming an integrated multi-point sensing network within the composite layers. Hydraulic fatigue tests were conducted under pressure cycling between 2 MPa and 87.5 MPa, reaching 48,000 cycles. The embedded FBG sensors were able to stably record cyclic strain evolution with peak amplitudes of approximately 6000 με in the hoop layer and 3500 με in the helical layer under hydraulic cycling. The hoop layers exhibited gradually decreasing strain amplitudes from the inner to outer regions, while the helical layer maintained stable signal performance. Analysis of fiber survival times indicated that the FBGs embedded in helical layers remained functional throughout the entire test, confirming the long-term monitoring capability under high-pressure oil environments. This study demonstrates a practical embedded-sensing approach compatible with the filament-winding process, providing experimental support for fatigue-life evaluation and in-service safety monitoring of high-pressure hydrogen storage vessels.
Open AccessIn Situ Strain Monitoring of a Type IV Composite Hydrogen Storage Vessel Under Hydraulic Fatigue Using Embedded FBG Sensors
A 70 MPa Type IV hydrogen composite pressure vessel (CPV) was instrumented with embedded Fiber Bragg Grating (FBG) sensors to realize in situ strain monitoring during hydraulic fatigue cycles. FBG arrays were co-wound with carbon fibers during the filament winding process, forming an integrated multi-point sensing network within the composite layers. Hydraulic fatigue tests were conducted under pressure cycling between 2 MPa and 87.5 MPa, reaching 48,000 cycles. The embedded FBG sensors were able to stably record cyclic strain evolution with peak amplitudes of approximately 6000 με in the hoop layer and 3500 με in the helical layer under hydraulic cycling. The hoop layers exhibited gradually decreasing strain amplitudes from the inner to outer regions, while the helical layer maintained stable signal performance. Analysis of fiber survival times indicated that the FBGs embedded in helical layers remained functional throughout the entire test, confirming the long-term monitoring capability under high-pressure oil environments. This study demonstrates a practical embedded-sensing approach compatible with the filament-winding process, providing experimental support for fatigue-life evaluation and in-service safety monitoring of high-pressure hydrogen storage vessels.
- Open Access
Aging Structure, Mechanical Properties, and ZnO Piezoelectric Coating-Based Ultrasonic Response of 15CrMo Steel
The ZnO piezoelectric coatings were deposited on the surface of 15CrMo steels by magnetron sputtering to directly excite the ultrasonic signal, effectively solving the coupling problem between the traditional probe and the pipe surface. The microstructure, mechanical properties, and ultrasonic longitudinal wave velocity of the aged samples were carried out systematically. The spheroidization grade of pearlite, evolution of carbide morphology, hardness, strength, and ultrasonic wave velocity were systematically analyzed. As the degree of aging intensifies, the material undergoes significant pearlite spheroidization and carbide coarsening. The Vickers hardness drops from 158 HV in the original state to 134.2 HV, and the yield strength and tensile strength decrease by 22.7% and 17.9%, respectively. The ultrasonic longitudinal wave velocity shows a monotonically upward trend with the increase in spheroidization grade, increasing from 5925.6 m/s in the original state to 5976 m/s at the highest spheroidization grade.
Open AccessAging Structure, Mechanical Properties, and ZnO Piezoelectric Coating-Based Ultrasonic Response of 15CrMo Steel
The ZnO piezoelectric coatings were deposited on the surface of 15CrMo steels by magnetron sputtering to directly excite the ultrasonic signal, effectively solving the coupling problem between the traditional probe and the pipe surface. The microstructure, mechanical properties, and ultrasonic longitudinal wave velocity of the aged samples were carried out systematically. The spheroidization grade of pearlite, evolution of carbide morphology, hardness, strength, and ultrasonic wave velocity were systematically analyzed. As the degree of aging intensifies, the material undergoes significant pearlite spheroidization and carbide coarsening. The Vickers hardness drops from 158 HV in the original state to 134.2 HV, and the yield strength and tensile strength decrease by 22.7% and 17.9%, respectively. The ultrasonic longitudinal wave velocity shows a monotonically upward trend with the increase in spheroidization grade, increasing from 5925.6 m/s in the original state to 5976 m/s at the highest spheroidization grade.
- Open Access
Research on the Effect of Argon–Nitrogen Ratio on the Mechanical Properties and Corrosion Behavior of CrN-Ag Self-Lubricating Coatings
Self-lubricating coatings are an effective solution for achieving stable and reliable lubrication in mechanical equipment; however, most self-lubricating coatings currently available still have certain shortcomings in terms of lubricity. In this paper, by regulating the argon and nitrogen flow ratio, a CrN-Ag composite self-lubricating coating with excellent lubrication performance was prepared, with a minimum wear rate and friction coefficient of only 2.3 mm3·10−5/N·m and 0.15, respectively, and a stable performance during long-term service. Furthermore, through systematic characterization of the coating composition, structure, and performance, the laws of the coating’s evolution were revealed based on the argon–nitrogen ratio. The results confirmed that the argon-to-nitrogen ratio had no significant effect on the coating composition and structure, while the addition of Ag dominated the high-temperature oxidation process of the coating and improved its tribological properties. In addition, while increasing the nitrogen flow ratio to a certain extent is beneficial for preparing coatings with high bonding strength and low wear rates and friction coefficients, at the same time, an excessively high nitrogen flow ratio can reduce the density of the coating, increase its hydrophilicity, and deteriorate its corrosion resistance.
Open AccessResearch on the Effect of Argon–Nitrogen Ratio on the Mechanical Properties and Corrosion Behavior of CrN-Ag Self-Lubricating Coatings
Self-lubricating coatings are an effective solution for achieving stable and reliable lubrication in mechanical equipment; however, most self-lubricating coatings currently available still have certain shortcomings in terms of lubricity. In this paper, by regulating the argon and nitrogen flow ratio, a CrN-Ag composite self-lubricating coating with excellent lubrication performance was prepared, with a minimum wear rate and friction coefficient of only 2.3 mm3·10−5/N·m and 0.15, respectively, and a stable performance during long-term service. Furthermore, through systematic characterization of the coating composition, structure, and performance, the laws of the coating’s evolution were revealed based on the argon–nitrogen ratio. The results confirmed that the argon-to-nitrogen ratio had no significant effect on the coating composition and structure, while the addition of Ag dominated the high-temperature oxidation process of the coating and improved its tribological properties. In addition, while increasing the nitrogen flow ratio to a certain extent is beneficial for preparing coatings with high bonding strength and low wear rates and friction coefficients, at the same time, an excessively high nitrogen flow ratio can reduce the density of the coating, increase its hydrophilicity, and deteriorate its corrosion resistance.
- Open Access
High-Temperature-Resistant High-Entropy Oxide Protective Coatings for Piezoelectric Thin Films
By introducing oxygen doping, the structure of an AlCrNbSiTiN coating was optimized, and its high-temperature oxidation resistance was improved. As the oxygen content incorporated increases, the coating changes from an FCC structure to an amorphous or spinel structure. Meanwhile, stress relaxation occurred, and the hardness of the coating dropped to 12 gpa. Oxygen-doped coatings exhibit excellent oxidation resistance; this is especially the case for oxidized coatings, whose structure remains stable up to 900 °C in an oxidizing environment.
Open AccessHigh-Temperature-Resistant High-Entropy Oxide Protective Coatings for Piezoelectric Thin Films
By introducing oxygen doping, the structure of an AlCrNbSiTiN coating was optimized, and its high-temperature oxidation resistance was improved. As the oxygen content incorporated increases, the coating changes from an FCC structure to an amorphous or spinel structure. Meanwhile, stress relaxation occurred, and the hardness of the coating dropped to 12 gpa. Oxygen-doped coatings exhibit excellent oxidation resistance; this is especially the case for oxidized coatings, whose structure remains stable up to 900 °C in an oxidizing environment.