Eunha Chang

Labor shortages and uneven terrain in orchards present significant challenges to autonomous navigation. This study proposes a navigation system that integrates Light Detection and Ranging (LiDAR) and Inertial Measurement Unit (IMU) data to enhance localization accuracy and map stability through Simultaneous Localization and Mapping (SLAM). To minimize distortions in LiDAR scans caused by ground irregularities, real-time tilt correction was implemented based on IMU feedback. Furthermore, the path planning module was improved by modifying the Rapidly-Exploring Random Tree (RRT) algorithm. The enhanced RRT generated smoother and more efficient trajectories with quantifiable improvements: the average shortest path length was 2.26 m, compared to 2.59 m with conventional RRT and 2.71 m with A* algorithm. Tracking performance also improved, achieving a root mean square error of 0.890 m and a maximum lateral deviation of 0.423 m. In addition, yaw stability was strengthened, as heading fluctuations decreased by approximately 7% relative to the standard RRT. Field results validated the robustness and adaptability of the proposed system under real-world agricultural conditions. These findings highlight the potential of LiDAR–IMU sensor fusion and optimized path planning to enable scalable and reliable autonomous navigation for precision agriculture.

Apple harvesting faces increasing challenges owing to rising labor costs and the limited seasonal workforce availability, highlighting the need for robotic harvesting solutions in precision agriculture. This study presents a 6-DOF robotic arm system designed for harvesting in dwarf hedge-planted orchards, featuring a lightweight perception module, a task-adaptive motion planner, and an adaptive soft gripper. A lightweight approach was introduced by integrating the Faster module within the C2f module of the You Only Look Once (YOLO) v8n architecture to optimize the real-time apple detection efficiency. For motion planning, a Dynamic Temperature Simplified Transition Adaptive Cost Bidirectional Transition-Based Rapidly Exploring Random Tree (DSA-BiTRRT) algorithm was developed, demonstrating significant improvements in the path planning performance. The adaptive soft gripper was evaluated for its detachment and load-bearing capacities. Field experiments revealed that the direct-pull method at 150 mN·m torque outperformed the rotation-pull method at both 100 mN·m and 150 mN·m. A custom control system integrating all components was validated in partially controlled orchards, where obstacle clearance and thinning were conducted to ensure operation safety. Tests conducted on 80 apples showed a 52.5% detachment success rate and a 47.5% overall harvesting success rate, with average detachment and full-cycle times of 7.7 s and 15.3 s per apple, respectively. These results highlight the system’s potential for advancing robotic fruit harvesting and contribute to the ongoing development of autonomous agricultural technologies.